[hylafax-users] Re[2]: Sending SMS to German D2-Provider

[FMK <meyer-kassel@online-shop-ag.de>]

I've got it working, finally. The Problem was the @ in my
dialstring...

Thanks to Christian Pluym who pointed me into the right direction !

/Florian



> My windows box uses this telephone number: 01722278000

> I used this number some months ago, it was busy all the time.
> I have not used it for months now.

> So the busy may just be a normal state with D2?

> Bernd



>> -----Original Message-----
>> From: hylafax-users-bounce@hylafax.org
>> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of FMK
>> Sent: Thursday, August 17, 2000 2:04 PM
>> To: hylafax-users@hylafax.org
>> Subject: [hylafax-users] Sending SMS to German D2-Provider
>> 
>> 
>> Hi all !
>> 
>> I want (or have to) send SMS to German D2 (Gateway 01722278020 and
>> 01722278020, tried both) with v4.0pl2, but everytime I try I get
>> this back:
>> 
>> : [25100]: SESSION BEGIN 00001027 491722278020
>> : [25100]: SEND PAGE: JOB 672 DEST 01722278020 COMMID 00001027
>> : [25100]: MODEM set DTR OFF
>> : [25100]: DELAY 2600 ms
>> : [25100]: MODEM set DTR ON
>> : [25100]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, 
>> output flow RTS/CTS
>> : [25100]: MODEM flush i/o
>> : [25100]: <-- [17:AT&FE0V1Q0S0=0H0\r]
>> : [25100]: --> [2:OK]
>> : [25100]: <-- [18:ATS8=2S7=60&D2&C1\r]
>> : [25100]: --> [2:OK]
>> : [25100]: <-- [7:ATL0M1\r]
>> : [25100]: --> [2:OK]
>> : [25100]: MODEM set parity: 7 bits, even parity
>> : [25100]: MODEM input buffering enabled
>> : [25100]: <-- [12:AT+FCLASS=0\r]
>> : [25100]: --> [2:OK]
>> : [25100]: DIAL 01722278020
>> : [25100]: <-- [17:ATDT01722278020@\r]
>> : [25100]: --> [4:BUSY]
>> : [25100]: PAGE FAILED: Busy signal detected
>> : [25100]: <-- [5:ATH0\r]
>> : [25100]: --> [2:OK]: [25100]: MODEM input buffering enabled
>> : [25100]: MODEM set DTR OFF
>> : [25100]: SESSION END
>> 
>> Sometimes, I get this instead:
>> 
>> : [25852]: SESSION BEGIN 00001033 491722278020
>> : [25852]: SEND PAGE: JOB 675 DEST 01722278020 COMMID 00001033
>> : [25852]: MODEM set DTR OFF
>> : [25852]: DELAY 2600 ms
>> : [25852]: MODEM set DTR ON
>> : [25852]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, 
>> output flow RTS/CTS
>> : [25852]: MODEM flush i/o
>> : [25852]: <-- [17:AT&FE0V1Q0S0=0H0\r]
>> : [25852]: --> [2:OK]
>> : [25852]: <-- [18:ATS8=2S7=60&D2&C1\r]
>> : [25852]: --> [2:OK]
>> : [25852]: <-- [7:ATL0M1\r]
>> : [25852]: --> [2:OK]
>> : [25852]: MODEM set parity: 8 bits, no parity
>> : [25852]: MODEM input buffering enabled
>> : [25852]: <-- [12:AT+FCLASS=0\r]
>> : [25852]: --> [2:OK]
>> : [25852]: DIAL 01722278020
>> : [25852]: <-- [17:ATDT01722278020@\r]
>> : [25852]: --> [9:NO ANSWER]
>> : [25852]: PAGE FAILED: No answer from remote
>> : [25852]: <-- [5:ATH0\r]
>> : [25852]: --> [2:OK]
>> : [25852]: MODEM input buffering enabled
>> : [25852]: MODEM set DTR OFF
>> : [25852]: SESSION END
>> 
>> 
>> 
>> My pagermap looks like this:
>> 
>> #--- Pagermap Start ----
>> #--- hylafax pagermap /var/spool/fax/etc/pagermap ----
>> # SMS to D1
>> 0170(.*)        01712521001/49170\1
>> 0171(.*)        01712521001/49171\1
>> 
>> # SMS to E-Plus
>> 0177(.*)        01771167/49177\1
>> 
>> # SMS to D2
>> 0172(.*)        01722278025/0049172\1
>> 
>> 
>> Any Ideas ?? Could anybody who got this D2-thingie working send me his
>> pagermap or any hints why those SMSes fail ??
>> 
>> Thanks & Greetings
>> 
>> Florian
>> 
>> 
>> 
>> 
>> ____________________ HylaFAX(tm) Users Mailing List 
>> _______________________
>>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org 
>> < /dev/null
>> 


> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null