|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] hylafax-4.1beta2-5rh6.i386.rpm continuous sent the first fax page
I installled hylafax-4.1beta2-5rh6.i386.rpm on my redhat linux server
version 6.2 .
I am using US Robotic V.90 fax external modem. (I used usr-rts config for my
config.ttyS0).
When I sent the FAX from whfc version 1.07. Fax is continuos sent the first
page.
It seem to be there is an error at end of first page. Then it tried to send
the first page again and again.
What's wrong with me?
The following is the log file from /var/spool/fax/log
Jul 13 11:37:10.01: [ 740]: SESSION BEGIN 00000006 126586386
Jul 13 11:37:10.02: [ 740]: SEND FAX: JOB 4 DEST 6586386 COMMID 00000006
Jul 13 11:37:10.02: [ 740]: DELAY 2600 ms
Jul 13 11:37:12.61: [ 740]: <-- [4:ATZ\r]
Jul 13 11:37:12.74: [ 740]: --> [2:OK]
Jul 13 11:37:12.74: [ 740]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Jul 13 11:37:12.88: [ 740]: --> [16:ATE0V1Q0X4S0=0H0]
Jul 13 11:37:12.88: [ 740]: --> [2:OK]
Jul 13 11:37:12.88: [ 740]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Jul 13 11:37:13.02: [ 740]: --> [2:OK]
Jul 13 11:37:13.02: [ 740]: <-- [12:AT+FCLASS=1\r]
Jul 13 11:37:13.16: [ 740]: --> [2:OK]
Jul 13 11:37:13.16: [ 740]: <-- [12:AT&H1&I0&R2\r]
Jul 13 11:37:13.30: [ 740]: --> [2:OK]
Jul 13 11:37:13.30: [ 740]: <-- [21:AT+FCLASS=0&H1&I0&R2\r]
Jul 13 11:37:13.44: [ 740]: --> [2:OK]
Jul 13 11:37:13.44: [ 740]: <-- [5:ATM0\r]
Jul 13 11:37:13.57: [ 740]: --> [2:OK]
Jul 13 11:37:13.57: [ 740]: <-- [12:AT+FCLASS=1\r]
Jul 13 11:37:13.81: [ 740]: --> [2:OK]
Jul 13 11:37:13.81: [ 740]: <-- [12:AT&H1&I0&R2\r]
Jul 13 11:37:14.05: [ 740]: --> [2:OK]
Jul 13 11:37:14.06: [ 740]: DIAL 6586386
Jul 13 11:37:14.06: [ 740]: <-- [12:ATDT6586386\r]
Jul 13 11:37:23.47: [ 740]: --> [7:CONNECT]
Jul 13 11:37:24.71: [ 740]: --> [2:OK]
Jul 13 11:37:24.71: [ 740]: REMOTE NSF "00 00 25 00 00 00 12 48 0D 82 10 50
00
20 00 2C F8"
Jul 13 11:37:24.71: [ 740]: NSF remote fax equipment: Ricoh
Jul 13 11:37:24.71: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:37:24.72: [ 740]: --> [7:CONNECT]
Jul 13 11:37:25.51: [ 740]: --> [2:OK]
Jul 13 11:37:25.51: [ 740]: REMOTE NSF "00 00 25 01 4C 2C 2E 4F 43 20 4C 41
54
49 50 41 43 20 59 41 48 54 41 43 96"
Jul 13 11:37:25.51: [ 740]: NSF remote fax equipment: Ricoh
Jul 13 11:37:25.51: [ 740]: NSF remote station ID: "CATHAY CAPITAL CO.,L"
Jul 13 11:37:25.51: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:37:25.52: [ 740]: --> [7:CONNECT]
Jul 13 11:37:26.21: [ 740]: --> [2:OK]
Jul 13 11:37:26.21: [ 740]: REMOTE CSI "662 6586301"
Jul 13 11:37:26.21: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:37:26.22: [ 740]: --> [7:CONNECT]
Jul 13 11:37:26.53: [ 740]: --> [2:OK]
Jul 13 11:37:26.53: [ 740]: REMOTE best rate 9600 bit/s
Jul 13 11:37:26.53: [ 740]: REMOTE max page width 1728 pixels in 215 mm
Jul 13 11:37:26.53: [ 740]: REMOTE max unlimited page length
Jul 13 11:37:26.53: [ 740]: REMOTE best vres 7.7 line/mm
Jul 13 11:37:26.53: [ 740]: REMOTE best format 2-D MMR
Jul 13 11:37:26.53: [ 740]: REMOTE supports T.30 Annex A, ECM
Jul 13 11:37:26.53: [ 740]: REMOTE best 20 ms, 10 ms/scanline
Jul 13 11:37:26.53: [ 740]: USE 9600 bit/s
Jul 13 11:37:26.53: [ 740]: USE 20 ms, 10 ms/scanline
Jul 13 11:37:26.53: [ 740]: SEND file "docq/doc4.ps;00"
Jul 13 11:37:26.58: [ 740]: USE page width 1728 pixels in 215 mm
Jul 13 11:37:26.58: [ 740]: USE unlimited page length
Jul 13 11:37:26.58: [ 740]: USE 3.85 line/mm
Jul 13 11:37:26.58: [ 740]: USE 1-D MR
Jul 13 11:37:26.58: [ 740]: SEND training at v.29 9600 bit/s
Jul 13 11:37:26.58: [ 740]: <-- [9:AT+FTH=3\r]
Jul 13 11:37:26.78: [ 740]: --> [7:CONNECT]
Jul 13 11:37:26.78: [ 740]: <-- data [23]
Jul 13 11:37:26.78: [ 740]: <-- data [2]
Jul 13 11:37:26.80: [ 740]: --> [7:CONNECT]
Jul 13 11:37:26.80: [ 740]: <-- data [6]
Jul 13 11:37:26.80: [ 740]: <-- data [2]
Jul 13 11:37:28.75: [ 740]: --> [2:OK]
Jul 13 11:37:28.75: [ 740]: DELAY 75 ms
Jul 13 11:37:28.83: [ 740]: <-- [10:AT+FTM=96\r]
Jul 13 11:37:29.15: [ 740]: --> [7:CONNECT]
Jul 13 11:37:29.15: [ 740]: <-- data [1024]
Jul 13 11:37:29.15: [ 740]: <-- data [776]
Jul 13 11:37:29.15: [ 740]: <-- data [2]
Jul 13 11:37:30.68: [ 740]: --> [2:OK]
Jul 13 11:37:30.68: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:37:31.36: [ 740]: --> [7:CONNECT]
Jul 13 11:37:32.28: [ 740]: --> [2:OK]
Jul 13 11:37:32.28: [ 740]: TRAINING succeeded
Jul 13 11:37:32.28: [ 740]: <-- [10:AT+FTM=96\r]
Jul 13 11:37:32.63: [ 740]: --> [7:CONNECT]
Jul 13 11:37:32.63: [ 740]: SEND begin page
Jul 13 11:37:32.65: [ 740]: <-- data [1029]
Jul 13 11:37:32.65: [ 740]: <-- data [1024]
Jul 13 11:37:32.65: [ 740]: <-- data [1024]
Jul 13 11:37:32.65: [ 740]: <-- data [1024]
Jul 13 11:37:32.65: [ 740]: <-- data [1024]
Jul 13 11:37:33.72: [ 740]: <-- data [1024]
Jul 13 11:37:33.72: [ 740]: <-- data [1026]
Jul 13 11:37:33.72: [ 740]: <-- data [1025]
Jul 13 11:37:34.82: [ 740]: <-- data [1024]
Jul 13 11:37:35.87: [ 740]: <-- data [1024]
Jul 13 11:37:35.87: [ 740]: <-- data [1024]
Jul 13 11:37:36.92: [ 740]: <-- data [1024]
Jul 13 11:37:38.02: [ 740]: <-- data [1026]
Jul 13 11:37:39.07: [ 740]: <-- data [1025]
Jul 13 11:37:40.12: [ 740]: <-- data [1026]
Jul 13 11:37:40.12: [ 740]: <-- data [1027]
Jul 13 11:37:41.22: [ 740]: <-- data [1026]
Jul 13 11:37:42.27: [ 740]: <-- data [1036]
Jul 13 11:37:43.32: [ 740]: <-- data [1028]
Jul 13 11:37:44.37: [ 740]: <-- data [1024]
Jul 13 11:37:44.37: [ 740]: <-- data [1024]
Jul 13 11:37:45.42: [ 740]: <-- data [1025]
Jul 13 11:37:46.52: [ 740]: <-- data [1026]
Jul 13 11:37:47.57: [ 740]: <-- data [1024]
Jul 13 11:37:48.62: [ 740]: <-- data [1024]
Jul 13 11:37:48.62: [ 740]: <-- data [1024]
Jul 13 11:37:49.67: [ 740]: <-- data [869]
Jul 13 11:37:50.77: [ 740]: SENT 27493 bytes of data
Jul 13 11:37:50.77: [ 740]: <-- data [504]
Jul 13 11:37:50.77: [ 740]: SENT 504 bytes of data
Jul 13 11:37:50.77: [ 740]: SEND 1D RTC
Jul 13 11:37:50.77: [ 740]: <-- data [29]
Jul 13 11:37:50.77: [ 740]: <-- data [2]
Jul 13 11:37:50.77: [ 740]: SEND end page
Jul 13 11:37:56.03: [ 740]: --> [2:OK]
Jul 13 11:37:56.03: [ 740]: DELAY 75 ms
Jul 13 11:37:56.11: [ 740]: SEND send MPS (more pages, same document)
Jul 13 11:37:56.11: [ 740]: <-- [9:AT+FTH=3\r]
Jul 13 11:37:56.26: [ 740]: --> [7:CONNECT]
Jul 13 11:37:56.26: [ 740]: <-- data [3]
Jul 13 11:37:56.26: [ 740]: <-- data [2]
Jul 13 11:37:57.44: [ 740]: --> [2:OK]
Jul 13 11:37:57.44: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:37:58.20: [ 740]: --> [7:CONNECT]
Jul 13 11:37:59.01: [ 740]: --> [2:OK]
Jul 13 11:37:59.01: [ 740]: SEND recv RTN (retrain negative)
Jul 13 11:37:59.01: [ 740]: SEND training at v.29 9600 bit/s
Jul 13 11:37:59.01: [ 740]: <-- [9:AT+FTH=3\r]
Jul 13 11:37:59.20: [ 740]: --> [7:CONNECT]
Jul 13 11:37:59.20: [ 740]: <-- data [23]
Jul 13 11:37:59.20: [ 740]: <-- data [2]
Jul 13 11:37:59.22: [ 740]: --> [7:CONNECT]
Jul 13 11:37:59.22: [ 740]: <-- data [6]
Jul 13 11:37:59.22: [ 740]: <-- data [2]
Jul 13 11:38:01.18: [ 740]: --> [2:OK]
Jul 13 11:38:01.18: [ 740]: DELAY 75 ms
Jul 13 11:38:01.26: [ 740]: <-- [10:AT+FTM=96\r]
Jul 13 11:38:01.58: [ 740]: --> [7:CONNECT]
Jul 13 11:38:01.58: [ 740]: <-- data [1024]
Jul 13 11:38:01.58: [ 740]: <-- data [776]
Jul 13 11:38:01.58: [ 740]: <-- data [2]
Jul 13 11:38:03.11: [ 740]: --> [2:OK]
Jul 13 11:38:03.11: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:38:03.80: [ 740]: --> [7:CONNECT]
Jul 13 11:38:04.60: [ 740]: --> [2:OK]
Jul 13 11:38:04.60: [ 740]: TRAINING succeeded
Jul 13 11:38:04.60: [ 740]: <-- [10:AT+FTM=96\r]
Jul 13 11:38:04.95: [ 740]: --> [7:CONNECT]
Jul 13 11:38:04.95: [ 740]: SEND begin page
Jul 13 11:38:04.95: [ 740]: <-- data [1029]
Jul 13 11:38:04.95: [ 740]: <-- data [1024]
Jul 13 11:38:04.95: [ 740]: <-- data [1024]
Jul 13 11:38:04.95: [ 740]: <-- data [1024]
Jul 13 11:38:04.95: [ 740]: <-- data [1024]
Jul 13 11:38:05.95: [ 740]: <-- data [1024]
Jul 13 11:38:05.95: [ 740]: <-- data [1026]
Jul 13 11:38:05.95: [ 740]: <-- data [1025]
Jul 13 11:38:06.92: [ 740]: <-- data [1024]
Jul 13 11:38:08.02: [ 740]: <-- data [1024]
Jul 13 11:38:09.07: [ 740]: <-- data [1024]
Jul 13 11:38:09.07: [ 740]: <-- data [1024]
Jul 13 11:38:10.12: [ 740]: <-- data [1026]
Jul 13 11:38:11.22: [ 740]: <-- data [1025]
Jul 13 11:38:12.32: [ 740]: <-- data [1026]
Jul 13 11:38:13.37: [ 740]: <-- data [1027]
Jul 13 11:38:13.37: [ 740]: <-- data [1026]
Jul 13 11:38:14.47: [ 740]: <-- data [1036]
Jul 13 11:38:15.52: [ 740]: <-- data [1028]
Jul 13 11:38:16.57: [ 740]: <-- data [1024]
Jul 13 11:38:17.62: [ 740]: <-- data [1024]
Jul 13 11:38:17.62: [ 740]: <-- data [1025]
Jul 13 11:38:18.67: [ 740]: <-- data [1026]
Jul 13 11:38:19.77: [ 740]: <-- data [1024]
Jul 13 11:38:20.82: [ 740]: <-- data [1024]
Jul 13 11:38:21.87: [ 740]: <-- data [1024]
Jul 13 11:38:21.87: [ 740]: <-- data [869]
Jul 13 11:38:22.97: [ 740]: SENT 27493 bytes of data
Jul 13 11:38:22.97: [ 740]: <-- data [504]
Jul 13 11:38:22.97: [ 740]: SENT 504 bytes of data
Jul 13 11:38:22.97: [ 740]: SEND 1D RTC
Jul 13 11:38:22.97: [ 740]: <-- data [29]
Jul 13 11:38:22.97: [ 740]: <-- data [2]
Jul 13 11:38:22.97: [ 740]: SEND end page
Jul 13 11:38:28.34: [ 740]: --> [2:OK]
Jul 13 11:38:28.34: [ 740]: DELAY 75 ms
Jul 13 11:38:28.42: [ 740]: SEND send MPS (more pages, same document)
Jul 13 11:38:28.42: [ 740]: <-- [9:AT+FTH=3\r]
Jul 13 11:38:28.57: [ 740]: --> [7:CONNECT]
Jul 13 11:38:28.57: [ 740]: <-- data [3]
Jul 13 11:38:28.57: [ 740]: <-- data [2]
Jul 13 11:38:29.75: [ 740]: --> [2:OK]
Jul 13 11:38:29.75: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:38:30.56: [ 740]: --> [7:CONNECT]
Jul 13 11:38:31.37: [ 740]: --> [2:OK]
Jul 13 11:38:31.37: [ 740]: SEND recv RTN (retrain negative)
Jul 13 11:38:31.37: [ 740]: SEND training at v.29 7200 bit/s
Jul 13 11:38:31.37: [ 740]: <-- [9:AT+FTH=3\r]
Jul 13 11:38:31.56: [ 740]: --> [7:CONNECT]
Jul 13 11:38:31.56: [ 740]: <-- data [23]
Jul 13 11:38:31.56: [ 740]: <-- data [2]
Jul 13 11:38:31.58: [ 740]: --> [7:CONNECT]
Jul 13 11:38:31.58: [ 740]: <-- data [6]
Jul 13 11:38:31.58: [ 740]: <-- data [2]
Jul 13 11:38:33.54: [ 740]: --> [2:OK]
Jul 13 11:38:33.54: [ 740]: DELAY 75 ms
Jul 13 11:38:33.62: [ 740]: <-- [10:AT+FTM=72\r]
Jul 13 11:38:33.94: [ 740]: --> [7:CONNECT]
Jul 13 11:38:33.94: [ 740]: <-- data [1024]
Jul 13 11:38:33.94: [ 740]: <-- data [326]
Jul 13 11:38:33.94: [ 740]: <-- data [2]
Jul 13 11:38:35.48: [ 740]: --> [2:OK]
Jul 13 11:38:35.48: [ 740]: <-- [9:AT+FRH=3\r]
Jul 13 11:38:35.80: [ 740]: --> [7:CONNECT]
Jul 13 11:38:36.86: [ 740]: --> [2:OK]
Jul 13 11:38:36.86: [ 740]: TRAINING succeeded
Jul 13 11:38:36.86: [ 740]: <-- [10:AT+FTM=72\r]
Jul 13 11:38:37.21: [ 740]: --> [7:CONNECT]
Jul 13 11:38:37.21: [ 740]: SEND begin page
Jul 13 11:38:37.21: [ 740]: <-- data [1029]
Jul 13 11:38:37.21: [ 740]: <-- data [1024]
Jul 13 11:38:37.21: [ 740]: <-- data [1024]
Jul 13 11:38:37.21: [ 740]: <-- data [1024]
Jul 13 11:38:37.21: [ 740]: <-- data [1026]
Jul 13 11:38:38.21: [ 740]: <-- data [1025]
Jul 13 11:38:38.21: [ 740]: <-- data [1024]
Jul 13 11:38:38.21: [ 740]: <-- data [1024]
Jul 13 11:38:39.37: [ 740]: <-- data [1024]
Jul 13 11:38:40.70: [ 740]: <-- data [1026]
Jul 13 11:38:42.03: [ 740]: <-- data [1026]
Jul 13 11:38:43.37: [ 740]: <-- data [1028]
Jul 13 11:38:44.77: [ 740]: <-- data [1026]
Jul 13 11:38:46.10: [ 740]: <-- data [1038]
Jul 13 11:38:46.10: [ 740]: <-- data [1026]
Jul 13 11:38:47.43: [ 740]: <-- data [1024]
Jul 13 11:38:48.77: [ 740]: <-- data [1026]
Jul 13 11:38:50.10: [ 740]: <-- data [1025]
Jul 13 11:38:51.37: [ 740]: <-- data [1024]
Jul 13 11:38:52.63: [ 740]: <-- data [1024]
Jul 13 11:38:53.90: [ 740]: <-- data [144]
Jul 13 11:38:53.90: [ 740]: SENT 20624 bytes of data
Jul 13 11:38:53.90: [ 740]: <-- data [774]
Jul 13 11:38:53.90: [ 740]: SENT 774 bytes of data
Jul 13 11:38:53.90: [ 740]: SEND 1D RTC
Jul 13 11:38:53.90: [ 740]: <-- data [29]
Jul 13 11:38:53.90: [ 740]: <-- data [2]
Jul 13 11:38:53.90: [ 740]: SEND end page
Jul 13 11:38:56.06: [ 740]: ABORT: job abort requested
Jul 13 11:39:01.05: [ 740]: --> [2:OK]
Jul 13 11:39:01.05: [ 740]: DELAY 75 ms
Any help would be appreciated
Thank you very much
Vichai
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
