[hylafax-users] Still chopping white space out of middle of document

["David Kempe" <david@solutionsfirst.net>]

People,
I'm still having this problem; The documents white space gets compressed or
chopped in the middle of the document.

At the end and it still faxed out like this:
http://www.yourgateway.net/econf-faxed.pdf
when it was printed from this:
http://www.yourgateway.net/econfusion.pdf

If someone could take the time to view these documents and tell me what is
wrong, that would be great. Below is some configs, if there is any more info
I can provide that would be great.
I am printing off from Win2k server using the Apple LaserWriter 16/600 PS
driver.
I have tried the same from Win95 with the relevant Apple LaserWriter driver.
Both going thru WHFC 1.06

Thanks,

Dave


This is my config
_____________

LogFacility:            daemon
CountryCode:            61
AreaCode:               2
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
PageChop:               none

My config.ttyS0
__________________
CountryCode:            61
AreaCode:               2
FAXNumber:              +61.2.98187711
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      0
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        Sydney.net
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              38400
ModemFlowControl:       rtscts          # default
#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
#ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
#
ModemAnswerFaxBeginCmd: "<19200><xon>"  # modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID:            etc/cid         # CID access control list file
#CIDNumber:             "NMBR = "       # pattern string for phone number
info
#CIDName:               "NAME = "       # pattern string for identity info



______________________________
solutionsFirst.net Consulting
http://solutionsfirst.net
Ph: (02) 9555 4847
Fax: (02) 9818 7711
Mob: 0413 022 143




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null