Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
problems compiling 4.1beta2 for RedHat
I'm having a lot of trouble compiling hylafax-4.1beta2 on my RedHat 6.1
(updated) AMD K6-2/450 system.
I get configure errors claiming that it can't find config.guess (although I
think that the real problem is that the output of config.guess is nothing
at all).
I've got another system working fine with 4.1beta1 and libtiff-3.4, but I'd
really like to get things rolling with libtiff-3.5 (especially for the
tiff2ps fixes in 3.5) which requires me to compile it from patched source.
I can try 'configure --target=' if I only knew what the output of
config.guess *should* be for my system. What does config.guess do
normally? Read below for the result of ./configure... and ./configure
--target=linux
Is anybody reading that has compiled HylaFAX successfully on a RedHat
system? If I can get through this I'll probably make a
hylafax-4.1beta2-patched-1rh6-i386.rpm by working with the 4.1beta1 spec
file that I dug out of the src.rpm
Would somebody give me a pointer please?
Thanks.
Lee Howard
[root@goomba hylafax-4.1beta2]# ./configure
Configuring HylaFAX (tm) (aka FlexFAX) 4.1beta2.
If configure does the wrong thing, check the file config.log for
information that may help you understand what went wrong.
Reading site-wide parameters from ./config.site.
Sorry, no target was specified on the command line and I don't seem to
have the GNU config.guess script that is used to deduce your system type.
Unrecoverable error! Once you've corrected the problem rerun this script.
Hangup
[root@goomba hylafax-4.1beta2]#
[root@goomba hylafax-4.1beta2]# ./configure --target=linux
Configuring HylaFAX (tm) (aka FlexFAX) 4.1beta2.
If configure does the wrong thing, check the file config.log for
information that may help you understand what went wrong.
Reading site-wide parameters from ./config.site.
Invalid configuration `linux': machine `linux' not recognized
Cannot locate a working ANSI C compiler.
We attempted to compile the following test program:
----------------------------------------------------------
main(int argc, char* argv) { exit(0); }
----------------------------------------------------------
with these compilers:
gcc cc ncc dcc xlc c89 gcc2 acc
but none of them were successful.
If your compiler is in a non-standard location, you can specify its
location in several ways:
o set the environment variable CC
o create a config.local or config.site file that includes a
definition for CC
o supply it on the command line using -with-CC=<pathname>
If command line options are required for ANSI C compilation, set the
ENVOPTS parameter to these options in a similar way (either through
an environment variable or config.local/config.site) and then rerun
this script.
Unrecoverable error! Once you've corrected the problem rerun this script.
[root@goomba hylafax-4.1beta2]#