flexfax: HyLaFAX not converting to TIFF

[del <del@cais.com>]

Greetings!

I have strange problem..every since I have compiled/installed HyLaFAX 
Beta2, I had no problems(well a few) sending/receiving faxes for about a 
month. However, I cannot send a fax...and I the fax is regular ASCII text.

Here is the output....any help would be appreciated.

don

___________________________________________________________________________

Your facsimile job to 7036914020 was not sent because document conversion
to facsimile failed. The output from the converter program was:


Check any PostScript documents for non-standard fonts and invalid constructs.
---- Unsent job status ----
Destination: 7036914020
JobID: 24
GroupID: 24
Sender: del
Mailaddr: del@cais.com
Submitted From: localhost.localdomain
Page Width: 215 (mm)
Page Length: 279 (mm)
Resolution: 196 (lpi)
Status: (nothing available)
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)
---- Documents submitted for transmission ----
The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.
Filename Size Type
docq/doc24.cover 0 PostScript cover page
docq/doc47.ps.24 0 PostScript