flexfax: pagesend Error

["Marco Goebenich" <mgoebenich@entire-systems.com>]

Hi!

Every time I try to send an SMS I get

Apr  5 15:12:08 golem FaxQueuer[22325]: SUBMIT JOB 87
Apr  5 15:12:08 golem PageSend[22386]: MODEM set DTR OFF
Apr  5 15:12:08 golem PageSend[22386]: DELAY 2600 ms
Apr  5 15:12:11 golem PageSend[22386]: MODEM set DTR ON
Apr  5 15:12:11 golem PageSend[22386]: MODEM set baud rate: 19200 baud,
input flow NONE, outp
ut flow NONE
Apr  5 15:12:11 golem PageSend[22386]: MODEM flush i/o
Apr  5 15:12:11 golem PageSend[22386]: <-- [24:AT&E9529071E0V1Q0S0=0H0\r]
Apr  5 15:12:11 golem FaxGetty[22313]: ANSWER: Can not lock modem device
Apr  5 15:12:11 golem PageSend[22386]: --> [2:OK]
Apr  5 15:12:11 golem PageSend[22386]: <-- [12:ATS8=2S7=60\r]
Apr  5 15:12:11 golem PageSend[22386]: --> [2:OK]
Apr  5 15:12:11 golem PageSend[22386]: <-- [12:AT+FCLASS=?\r]
Apr  5 15:12:11 golem PageSend[22386]: --> [5:0,1,8]
Apr  5 15:12:11 golem PageSend[22386]: --> [2:OK]
Apr  5 15:12:11 golem PageSend[22386]: <-- [12:AT+FCLASS=0\r]
Apr  5 15:12:11 golem PageSend[22386]: --> [2:OK]
Apr  5 15:12:11 golem PageSend[22386]: MODEM  /
Apr  5 15:12:11 golem PageSend[22386]: <-- [5:ATM0\r]
Apr  5 15:12:11 golem PageSend[22386]: --> [2:OK]
Apr  5 15:12:11 golem PageSend[22386]: MODEM set parity: 7 bits, even parity
Apr  5 15:12:11 golem PageSend[22386]: MODEM input buffering disabled
Apr  5 15:12:11 golem PageSend[22386]: SEND PAGE: JOB 87 DEST 01712092522
COMMID 00000130
Apr  5 15:12:45 golem PageSend[22386]: PAGE FAILED: Busy signal detected

in the log.

faxgetty could not lock the modem, could this be the error, or is it
MODEM set parity: 7 bits, even parity

>From Senpage HOWTO
----snipp-----
What we do now is add  &pagerTTYParity:"none"  to the files named after the
D1 and e-plus numbers
this is to set the call to N-8-1 parity instead of the 7-E-1 as is the
default, this is the parity the german providers use.
----snipp-----

should the parity not be: no parity 8bits? I thought &pagerTTYParity:"none"
was therefor.


Here are my configfiles:

etc/pagermap

# SMS an D1 Handy
#0170(.*)   01712092522/49170\1
0171(.*)    01712092522/49171\1
#0175(.*)   01712092522/49175\1

info/491712092522

supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:no
maxPageWidth:2432
maxPageLength:-1
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
sendFailures:0
dialFailures:6
lastDialFailure:"Busy signal detected"
&pagerTTYParity:"none"
&pagingProtocol:"ixo"



etc/config.ttyI0


CountryCode:        49
AreaCode:       2624
FAXNumber:      +49.2624.9529071
LongDistancePrefix: 0
InternationalPrefix:    00
DialStringRules:    etc/dialrules
ServerTracing:      527
SessionTracing:     527
FaxRcvdCmd:     bin/faxrcvd
RecvFileMode:       0666
LogFileMode:        0600
DeviceMode:     0666
RingsBeforeAnswer:  2
SpeakerVolume:      off
GettyArgs:      "-r -b -s %s %l"
LocalIdentifier:    "+49 2624 95 29 0 71 "
LogFacility:        local6
TagLineFont:        etc/lutRS18.pcf
TagLineFormat:      "%%l|%c|Seite %%p von %%t"
MaxRecvPages:       25
ModemType:      Class1
ModemDialCmd:       ATDT%s@
ModemResetCmds:     "AT&E9529071"
Class1Cmd:      AT+FCLASS=1
Class1TCFResponseDelay: 75
Class1SendPPMDelay: 75
Class1SendTCFDelay: 75
Class1TrainingRecovery: 1500
Class1RecvAbortOK:  200
Class1FrameOverhead:    4
Class1RecvIdentTimer:   40000
Class1TCFMaxNonZero:    10
Class1TCFMinRun:    1000

Thanks for your help

Marco