Re: flexfax: Zyxel 1496E modem error

[Dmitry Bely <dbely@mail.ru>]

"Paul van der Vlis" <E.P.van.der.Vlis@inter.nl.net> writes:

> I have modem errors using the Zyxel U1496E driver.
> Sending "AT+FPHCTO=30" gives the error, I do not find this command in the
> Zyxel manual.
> After the error some strings are sended a second time, and the same error
> occurs again.
> Where can I change this string? I do not find it in config.ttyS0.

Add the following to your config.ttyS0:

[---cut---]
ModemResetCmds:         ATZS38.3=1
#                                                                      
# ECM is not implemented despite AT+FCC=? says
#
Class2DCCQueryCmd:      "!(0,1),(0-5),(0-4),(0-2),(0,1),(0),(0),(0-7)"
#
# Quality checking is not implemented despite AT+FCQ=? says
#
Class2CQQueryCmd:       "!(0),(0)"
#
# Disable unnecessary, not implemented, and possibly dangerous commands 
#
Class2BORCmd:           "AT"
Class2PIECmd:           "AT"
Class2PHCTOCmd:         "AT"
Class2TBCCmd:           "AT"
[---cut---]

> I use Hylafax 4.1 beta2, Suse Linux 6.3 and a Zyxel U1496E with 6.11a
> firmware

Update your firmware to 6.21!

Please also note that you will suffer from endless RTN with some Canon
fax machines due to the Ghostscript/Hylafax bugs (incorrect T.4 data) until you
install my patch for 4.1 beta 2 (was published recently in hylafax-devel
mailing list)

Hope to hear from you soon,
Dmitry