flexfax: Autoanswer problem (Hylafax 4.1Beta2,USR,RH6)

[Jérôme BLAIN <blain@fast.fr>]

				Hello,



	Here's my configuration : Hylafax 4.1 Beta 2 (binaries), external USR
Courrier V34 fax with V32 bis, Linux RedHat 6.0 .

	I can't make my fax auto-answer on an incoming fax. But it works when I
launch 
/usr/local/sbin/faxanswer ttyS1 when the AA leds are blinking on the
modem-fax.
Out of this, everything is ok ( the PC's clients have got WHFC 1.0.6 ).


Here's my etc/config.ttyS1 :

FAXNumber:		"0933"
DialStringRules:	etc/dialrules.europe
ServerTracing:		262143
SessionTracing:		262143
RecvFileMode:		0666
LogFileMode:		0600
DeviceMode:		0777
RingsBeforeAnswer:	1
SpeakerVolume:		low
GettyArgs:		"-h %l %s"
LocalIdentifier:	"FAST HYLAFAX"
LogFacility:		local5
ClocalAsRoot:		no
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
QualifyCID:		
QualifyTSI:		
MaxRecvPages:		25
#
ModemType:		Class2.0	# use class 2.0 interface
ModemRate:		38400		# DCE-DTE communication rate
ModemFlowControl:	rtscts		# XON/XOFF flow control assumed
#
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
#
ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemResultCodesCmd:	ATQ0X4	 	# enable extended result codes
#
ModemSetupAACmd:	AT+FAA=1
#
ModemSetVolumeCmd:	"ATM0 ATM1 ATM1 ATM1 ATM1"
#
Class2BUGCmd:		AT+FBU=0
#
Class2CQQueryCmd:	!(0),(0)	# override modem response
#
Class2NRCmd:    AT+FNR=1,1,1,0



Here's the log :
Mar 22 12:28:14 tokelau FaxGetty[2952]: STATE CHANGE: RUNNING -> LISTENING
Mar 22 12:28:14 tokelau FaxGetty[2952]: MODEM input buffering enabled
mar 22 12:28:14 tokelau FaxQueuer[2886]: FIFO RECV "+ttyS1:B"
mar 22 12:28:14 tokelau FaxQueuer[2886]: MODEM ttyS1: BUSY
Mar 22 12:28:15 tokelau FaxGetty[2952]: --> [4:RING]
Mar 22 12:28:15 tokelau FaxGetty[2952]: STATE CHANGE: LISTENING -> ANSWERING
Mar 22 12:28:15 tokelau FaxGetty[2952]: MODEM input buffering enabled
Mar 22 12:28:15 tokelau FaxGetty[2952]: Apply CanonicalNumber rules to "0933"
Mar 22 12:28:15 tokelau FaxGetty[2952]: --> match rule "^[^+]", result now
"+0933"
Mar 22 12:28:15 tokelau FaxGetty[2952]: --> return result "+0933"
mar 22 12:28:15 tokelau FaxQueuer[2886]: FIFO RECV "+ttyS1:I00000023"
mar 22 12:28:15 tokelau FaxQueuer[2886]: MODEM ttyS1: COMID 00000023
Mar 22 12:29:08 tokelau FaxGetty[2952]: ANSWER: Ring detected without
successful handshake
Mar 22 12:29:08 tokelau FaxGetty[2952]: <-- [5:ATH0\r]
Mar 22 12:29:08 tokelau FaxGetty[2952]: --> [2:OK]
Mar 22 12:29:08 tokelau FaxGetty[2952]: MODEM set DTR OFF



Thank you for your help,



Jérôme BLAIN
System Administrator
blain@fast.fr