flexfax: elsa microlink 56k basic compression capabilities

["Bernd Proissl" <news@proissl.de>]

This should be correct:

ati6
MicroLink 56k basic

OK
at+fclass=2.0;+fcc=?
(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)

OK
at+fdcc=?
(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7)

OK
ati3
Version 1.20 / 26.10.1999

OK

there is a ninth parameter! i took special care during copy/paste.

Bernd


> -----Original Message-----
> From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com]On
> Behalf Of Dmitry Bely
> Sent: Friday, March 17, 2000 9:53 AM
> To: flexfax@sgi.com
> Subject: Re: flexfax: Q about elsa modem
> 
> 
> > > ATI3
> > > Version 1.20 / 26.10.1999
> > > 
> > > OK
> > > at+fclass=2.0;+fcc=?
> > > (0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)
> > > 
> > > OK
> >                                       ^^^^^^^^^
> > Bug in Microlink's firmware (if you reproduced the answer correctly) --
> > they swapped BF and ST parameters! Should be (0),(0-7)
> 
> Oh, sorry. The bug was in my mind :-) But what does the ninth 
> parameter mean? It's not decribed in T.class2 standard draft :-(
> 
> Hope to hear from you soon,
> Dmitry
>