RE: flexfax: Hylafax and Sendpage Howto

["Marco Goebenich" <mgoebenich@entire-systems.com>]

Hi!


The HOWTO is fine but...

If I do pagesend -p 0171xxxxxxx test

I get..
Feb 24 11:06:46 golem PageSend[2614]: MODEM set DTR OFF
Feb 24 11:06:46 golem PageSend[2614]: DELAY 2600 ms
Feb 24 11:06:48 golem PageSend[2614]: MODEM set DTR ON
Feb 24 11:06:48 golem PageSend[2614]: MODEM set baud rate: 19200 baud, input
flow NONE, output flow NONE
Feb 24 11:06:48 golem PageSend[2614]: MODEM flush i/o
Feb 24 11:06:48 golem PageSend[2614]: <-- [19:AT&E70E0V1Q0S0=0H0\r]
Feb 24 11:06:48 golem FaxGetty[2585]: ANSWER: Can not lock modem device
Feb 24 11:06:48 golem PageSend[2614]: --> [2:OK]
Feb 24 11:06:48 golem PageSend[2614]: <-- [12:ATS8=2S7=60\r]
Feb 24 11:06:49 golem PageSend[2614]: --> [2:OK]
Feb 24 11:06:49 golem PageSend[2614]: <-- [12:AT+FCLASS=?\r]
Feb 24 11:06:49 golem PageSend[2614]: --> [5:0,1,8]
Feb 24 11:06:49 golem PageSend[2614]: --> [2:OK]
Feb 24 11:06:49 golem PageSend[2614]: <-- [12:AT+FCLASS=0\r]
Feb 24 11:06:49 golem PageSend[2614]: --> [2:OK]
Feb 24 11:06:49 golem PageSend[2614]: MODEM  /
Feb 24 11:06:49 golem PageSend[2614]: <-- [5:ATM0\r]
Feb 24 11:06:49 golem PageSend[2614]: --> [2:OK]
Feb 24 11:06:49 golem PageSend[2614]: MODEM set parity: 7 bits, even parity
Feb 24 11:06:49 golem PageSend[2614]: MODEM input buffering disabled
Feb 24 11:06:49 golem PageSend[2614]: SEND PAGE: JOB 53 DEST 01712092522
COMMID 00000091
Feb 24 11:06:54 golem PageSend[2614]: PAGE FAILED: Busy signal detected
 in the logfile

Here my pagermap and info (only for D1 for testing)
---------------------------------------------------
file: etc/pagermap

# SMS an D1 Handy
0170(.*)    01712092522/49170\1
0171(.*)    01712092522/49171\1
0175(.*)    01712092522/49175\1

#SMS an D2 Handy
0172(.*)    01722278020/0049172\1
0173(.*)    01722278020/0049173\1
0174(.*)    01722278020/0049174\1

#SMS an E-Plus Handy
0177(.*)    01771167/49177\1
0178(.*)    01771167/49178\1

#SMS an Viag Interkom Handy
#0179(.*)   01760000443/49179\1
--------------------------------------------------
file: info/491712092522

supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:no
maxPageWidth:2432
maxPageLength:-1
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
sendFailures:0
dialFailures:4
lastDialFailure:"Busy signal detected"
&pagerTTYParity:"none"
&pagingProtocol:"ixo"

Thanks for any help

Marco