Re: Suitable faxmodems for hylafax

To: Karl Denninger <karl@Denninger.Net>
Subject: Re: flexfax: Suitable faxmodems for hylafax
From: "James R. Hay" <jrhay@HayA.QC.CA>
cc: "Miller's" <msds@freewwweb.com>, flexfax@sgi.com
Date: Tue, 22 Feb 2000 17:16:39 -0500 (EST)

On Tue, 15 Feb 2000, Karl Denninger wrote:

> I have a set of the Multitechs - with the exception of some problems that
> I'm reasonably sure are on the other end (T.2 issues with DCN - like being
> out of paper and buffer memory!) I've seen no trouble with them.

I should have a Multitich MT5600ZDV tomorrow.  Do you have a config file
which I could use or will the stock one work "out of the box"?

Thanks,
Jim.

James R. Hay				jrhay@haya.qc.ca
James R. Hay and Associates
P.O. Box 46003				ax25: ve2ve@ve2tcp#mtl.pq.can.noam
Pointe Claire, QC			amprnet: ve2ve@ve2tcp.ampr.org
H9R 5R4

References:
- Re: Suitable faxmodems for hylafax
  - From: Karl Denninger <karl@Denninger.Net>

Prev by Date: Re: How convert pcl to postscript?
Next by Date: Re: Where are received faxes?
Prev by thread: Re: Suitable faxmodems for hylafax
Next by thread: Re: Suitable faxmodems for hylafax
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services