flexfax: freebsd 3.4

[ivan sharov <is@gcom.ru>]

Hi all !

Anybody worked with hylafax on freebsd v 3.4 ?

I am install hylafax v4.0pl2 on my freebsd 3.4-release system, without
any problem, but i cannot receive any fax.
I am use zyxel 1496S with zyxel-1496-2.0 configuration file.

session log here :
Jan 28 02:35:37.49: [  250]: SESSION BEGIN 00000165 19995551212
Jan 28 02:35:37.49: [  250]: <-- [4:ATA\r]
Jan 28 02:35:48.66: [  250]: --> [11:CONNECT FAX]
Jan 28 02:35:48.66: [  250]: ANSWER: FAX CONNECTION
Jan 28 02:35:48.66: [  250]: STATE CHANGE: ANSWERING -> RECEIVING
Jan 28 02:35:48.66: [  250]: MODEM input buffering enabled
Jan 28 02:35:48.66: [  250]: RECV FAX: begin
Jan 28 02:35:48.72: [  250]: --> [5:+FCON]
Jan 28 02:35:58.07: [  250]: --> [27:+FTSI: 7      ]
Jan 28 02:35:58.07: [  250]: REMOTE TSI "7 "
Jan 28 02:35:58.07: [  250]: --> [21:+FDCS:1,2,0,0,0,0,0,0]
Jan 28 02:35:58.07: [  250]: REMOTE wants 7200 bit/s
Jan 28 02:35:58.07: [  250]: REMOTE wants page width 1728 pixels in 215
mm
Jan 28 02:35:58.07: [  250]: REMOTE wants A4 page length (297 mm)
Jan 28 02:35:58.07: [  250]: REMOTE wants 7.7 line/mm
Jan 28 02:35:58.07: [  250]: REMOTE wants 1-D MR
Jan 28 02:35:58.07: [  250]: --> [2:OK]
Jan 28 02:35:58.07: [  250]: <-- [7:AT+FDR\r]
Jan 28 02:35:59.68: [  250]: --> [5:+FCFR]
Jan 28 02:35:59.68: [  250]: --> [27:+FTSI: 7 3832 289625       ]
Jan 28 02:35:59.68: [  250]: REMOTE TSI "7 3832 289625"
Jan 28 02:35:59.68: [  250]: --> [21:+FDCS:1,2,0,0,0,0,0,0]
Jan 28 02:35:59.68: [  250]: REMOTE wants 7200 bit/s
Jan 28 02:35:59.68: [  250]: REMOTE wants page width 1728 pixels in 215
mm
Jan 28 02:35:59.68: [  250]: REMOTE wants A4 page length (297 mm)
Jan 28 02:35:59.68: [  250]: REMOTE wants 7.7 line/mm
Jan 28 02:35:59.68: [  250]: REMOTE wants 1-D MR
Jan 28 02:35:59.96: [  250]: --> [7:CONNECT]
Jan 28 02:35:59.96: [  250]: RECV: begin page
Jan 28 02:35:59.96: [  250]: RECV: send trigger 022
Jan 28 02:35:59.96: [  250]: <-- data [1]
Jan 28 02:36:00.79: [  250]: RECV/CQ: Invalid WhiteTable code word, row
0, x 0
Jan 28 02:36:00.79: [  250]: RECV/CQ: Bad 1D pixel count, row 0, got 0,
expected 1728

[..skip..]

After first page, sending site allways aborting with error message, but
at my server i see

>ps ax | grep faxgetty
  250  ??  R    651:47.95 /usr/local/sbin/faxgetty cuaa0
               ^^^
My faxgetty, after remote site disconect,  continue running while i
don't kill it.
I am also trying install package from freebsd.org, rebuild source, but
this problem still exist, faxgetty not worked.

At beginning I am think, that it is hardware problem, but when I am
install mgety package, i am receive fax without _any_ problem.

At freebsd 2.2.5  i don't have this problem.

--

/ivan sharov,
        e-mail is@gcom.ru
        fidonet 2:5000/81