Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: RESEND: JFax



The receiving fax is supposed to start beeping on picking up the phone. 
The sending fax will wait until it hears the beep to start the
negotiation.

There is a setting somewhere (I'm not sure where - one of the ATSx
commands) that allows you to instruct your fax to start the negotiation.

--Yan

Kip Cranford wrote:
> 
> ----
> Sorry, forgot the log output in the last messages.
> ----
> 
> I have a Multi-Tech systems MT2834ZDX/0317I modem, connected to a RH6
> box using hylafax-4.1beta1.
> 
> I am able to send faxes fine to the sites I've tested (that I know have
> real fax machines).  However, I have a free Jfax account, which
> basically gives me a number somewhere that will accept faxes for me,
> then mails me the faxes as attachments.  I got this account so I could
> test HylaFax...
> 
> The Jfax server, when called, answers with an automated voice message,
> saying something like "to leave a voice mail press 1, to send a fax,
> just start faxing...".  Well, the Multi-Tech modem never seems to "just
> start faxing".  In fact, it seems like it's sitting on the line waiting
> for some verification from the other end (the Jfax server) to give it
> the go-ahead to start sending information.  See log output below.
> 
> What's strange, is that I had originally configured HylaFax with a USR
> 56K Sportster, which turned out to have loads of other problems.  One
> thing it could do correctly, however, was send faxes to the JFax
> account.
> 
> I guess I really don't _need_ to send faxes to that account, but I'd
> like to be able to, since it's a very good debugging tool.  It seems
> like it may be a configuration issue with the modem, but I'm not sure.
> 
> Any information would be greatly appreciated!
> 
> Thanks,
> 
> --kip
> 
> ============ From the log =============
> Jan 25 12:21:30.58: [25648]: <-- [17:ATDT1435807XXXX@\r]
> Jan 25 12:23:04.75: [25648]: --> [8:+FHNG:11]
> Jan 25 12:23:04.75: [25648]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> Jan 25 12:23:04.75: [25648]: SEND FAILED: No answer (T.30 T1 timeout)
> Jan 25 12:23:04.75: [25648]: <-- [5:ATH0\r]
> Jan 25 12:23:05.39: [25648]: --> [2:OK]
> Jan 25 12:23:05.39: [25648]: SESSION END

-- 

Think different
	ride a recumbent
		use Linux.



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services