Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Interrupted transmission
- To: Hylafax Mailing List <flexfax@sgi.com>
- Subject: flexfax: Interrupted transmission
- From: Frank Heine-Silberg <mqm@silberg-inc.de>
- Date: Fri, 21 Jan 2000 14:29:52 GMT
Dear helping hands!
Nearly all systems go, I can use h.fax from my programs(e.g. Kde /so
51)with your tipps. But all faxes are only transmitted to 50 percent.
Tail -f /var... tells me that the job is still sending, but the
receiver has only got the first half of the first document. The
initialization of modem shows the folloeing lines:
Jan 14 22:59:34 linux FaxGetty[324]: MODEM set DTR OFF Jan 14 22:59:34
linux FaxGetty[324]: DELAY 2600 ms Jan 14 22:59:36 linux
FaxGetty[324]: MODEM set DTR ON Jan 14 22:59:36 linux FaxGetty[324]:
MODEM set baud rate: 19200 baud, input flow NON
E, output flow NONE Jan 14 22:59:36 linux FaxGetty[324]: MODEM flush i/o Jan 14 22:59:36 linux FaxGetty[324]: <--
[15:ATE0V1Q0S0=0H0\r] Jan 14 22:59:37 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:37 linux FaxGetty[324]: <-- [12:ATS8=2S7=60\r] Jan 14 22:59:37 linux FaxGetty[324]: -->
[2:OK] Jan 14 22:59:37 linux FaxGetty[324]: <-- [12:AT+FCLASS=?\r]
Jan 14 22:59:37 linux FaxGetty[324]: --> [7:0,1,2.0] Jan 14 22:59:37 linux
FaxGetty[324]: --> [2:OK] Jan 14 22:59:37 linux FaxGetty[324]: <-- [14:AT+FCLASS=2.0\r]
Jan 14 22:59:37 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:37 linux
FaxGetty[324]: <-- [8:AT+FMI?\r] Jan 14 22:59:37 linux FaxGetty[324]: --> [24:FEM556BI
LAN + 56K Modem] Jan 14 22:59:37 linux FaxGetty[324]: --> [2:OK] Jan 14
22:59:37 linux FaxGetty[324]: <-- [8:AT+FMM?\r] Jan 14 22:59:38 linux FaxGetty[324]:
--> [2:OK] Jan 14 22:59:38 linux FaxGetty[324]: <-- [8:AT+FMR?\r]
Jan 14 22:59:38 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:38
linux FaxGetty[324]: <-- [9:AT+FCC=?\r] Jan 14 22:59:38 linux FaxGetty[324]: -->
[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)] Jan 14 22:59:38 linux FaxGetty[324]: <-- [9:AT+FCQ=?\r]
Jan 14 22:59:38 linux FaxGetty[324]: --> [11:(0-2),(0-2)] Jan 14 22:59:38 linux
FaxGetty[324]: --> [2:OK] Jan 14 22:59:38 linux FaxGetty[324]: <-- [9:AT+FAP=?\r]
Jan 14 22:59:39 linux FaxGetty[324]: --> [5:ERROR]
Jan 14 22:59:39 linux FaxGetty[324]: <-- [9:AT+FSP=?\r] Jan 14 22:59:39 linux
FaxGetty[324]: --> [5:(0,1)] Jan 14 22:59:39 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:39 linux FaxGetty[324]: <-- [14:AT+FCLASS=2.0\r]
Jan 14 22:59:39 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:39 linux FaxGetty[324]:
<-- [9:AT+FLO=0\r] Jan 14 22:59:39 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:39 linux FaxGetty[324]: <-- [9:AT+FPP=0\r] Jan 14 22:59:39 linux
FaxGetty[324]: --> [2:OK] Jan 14 22:59:39 linux FaxGetty[324]: <-- [9:AT+FBO=0\r]
Jan 14 22:59:39 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:39
linux FaxGetty[324]: <-- [10:AT+FCT=30\r] Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:40 linux FaxGetty[324]: <-- [15:AT+FNR=1,1,1,0\r]
Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:40 linux
FaxGetty[324]: <-- [9:AT+FIE=0\r] Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:40 linux FaxGetty[324]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK] Jan 14 22:59:40 linux
FaxGetty[324]: MODEM FEM556BI LAN + 56K MODEM / Jan 14 22:59:40 linux FaxGetty[324]: <-- [7:ATL3M1\r]
Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:40 linux FaxGetty[324]: <-- [9:AT+FCR=1\r] Jan 14 22:59:40 linux
FaxGetty[324]: --> [2:OK] Jan 14 22:59:40 linux FaxGetty[324]: <--
[22:AT+FLI="Silberg-Inc."\r] Jan 14 22:59:40 linux FaxGetty[324]: --> [2:OK]
Jan 14 22:59:40 linux FaxGetty[324]: MODEM input buffering disabled Jan 14 23:10:00 linux
HylaFAX[986]: User root timed out after 900 seconds at Fri Jan 14 23:10:00 2000
Depends it on the kill time? Where can I change it?
Thanks Frank
--
Frank Heine-Silberg, D-
44629 Herne
E-Mail: mqm@silberg-inc.de