flexfax: All config file for USR MESSAGE MODEM are welcome !

["Eric MAISONOBE" <coloc@coloc.org>]

I try since some weeks  to make a correct config file to use Hylafax with a
USR 56K MESSAGE MODEM.

The problem (it seems be very classic) : when i send fax to old (and
analogics) faxes, i get messages like :
- "No response to MPS repeated 3 times (code 52)"
or
- "No response to EOP repeated 3 times (code 54)"

I've try all config i've found in Hulyfax package, without any succes.

So, please, if you're using this king off modem, send me your config file
!!!!
(Class2.0, 2 or 1 : any kind if it works !!!)

You can see below an example of a -dramatic- fax session.

Eric MAISONOBE
    viret@nat.fr
___________________________
Jan 19 18:09:49.07: [ 5226]: SESSION BEGIN 00000044 3300143292828
Jan 19 18:09:49.07: [ 5226]: SEND FAX: JOB 24 DEST 0473291818 COMMID
00000044
Jan 19 18:09:49.18: [ 5226]: DELAY 2600 ms
Jan 19 18:09:51.79: [ 5226]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Jan 19 18:09:51.93: [ 5226]: --> [2:OK]
Jan 19 18:09:51.93: [ 5226]: <-- [23:ATS8=2S7=60S13=1&D2&C1\r]
Jan 19 18:09:52.07: [ 5226]: --> [2:OK]
Jan 19 18:09:52.07: [ 5226]: <-- [14:AT+FCLASS=2.0\r]
Jan 19 18:09:52.21: [ 5226]: --> [2:OK]
Jan 19 18:09:52.21: [ 5226]: <-- [9:AT+FLO=1\r]
Jan 19 18:09:52.35: [ 5226]: --> [2:OK]
Jan 19 18:09:52.35: [ 5226]: <-- [9:AT+FPP=0\r]
Jan 19 18:09:52.49: [ 5226]: --> [2:OK]
Jan 19 18:09:52.49: [ 5226]: <-- [9:AT+FBO=0\r]
Jan 19 18:09:52.63: [ 5226]: --> [2:OK]
Jan 19 18:09:52.63: [ 5226]: <-- [10:AT+FCT=30\r]
Jan 19 18:09:52.77: [ 5226]: --> [2:OK]
Jan 19 18:09:52.77: [ 5226]: <-- [15:AT+FNR=1,1,1,0\r]
Jan 19 18:09:52.91: [ 5226]: --> [2:OK]
Jan 19 18:09:52.91: [ 5226]: <-- [9:AT+FIE=0\r]
Jan 19 18:09:53.05: [ 5226]: --> [2:OK]
Jan 19 18:09:53.05: [ 5226]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 19 18:09:53.19: [ 5226]: --> [2:OK]
Jan 19 18:09:53.19: [ 5226]: <-- [5:ATM0\r]
Jan 19 18:09:53.33: [ 5226]: --> [2:OK]
Jan 19 18:09:53.33: [ 5226]: <-- [14:AT+FCLASS=2.0\r]
Jan 19 18:09:53.57: [ 5226]: --> [2:OK]
Jan 19 18:09:53.57: [ 5226]: <-- [9:AT+FLO=1\r]
Jan 19 18:09:53.81: [ 5226]: --> [2:OK]
Jan 19 18:09:53.81: [ 5226]: <-- [9:AT+FPP=0\r]
Jan 19 18:09:54.05: [ 5226]: --> [2:OK]
Jan 19 18:09:54.05: [ 5226]: <-- [9:AT+FBO=0\r]
Jan 19 18:09:54.29: [ 5226]: --> [2:OK]
Jan 19 18:09:54.29: [ 5226]: <-- [10:AT+FCT=30\r]
Jan 19 18:09:54.53: [ 5226]: --> [2:OK]
Jan 19 18:09:54.53: [ 5226]: <-- [15:AT+FNR=1,1,1,0\r]
Jan 19 18:09:54.77: [ 5226]: --> [2:OK]
Jan 19 18:09:54.77: [ 5226]: <-- [9:AT+FIE=0\r]
Jan 19 18:09:55.01: [ 5226]: --> [2:OK]
Jan 19 18:09:55.01: [ 5226]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 19 18:09:55.25: [ 5226]: --> [2:OK]
Jan 19 18:09:55.25: [ 5226]: <-- [30:AT+FLI="TEST"\r]
Jan 19 18:09:55.49: [ 5226]: --> [2:OK]
Jan 19 18:09:55.51: [ 5226]: DIAL 0473291818
Jan 19 18:09:55.51: [ 5226]: <-- [15:ATDT0143292828\r]
Jan 19 18:10:11.59: [ 5226]: --> [4:+FCO]
Jan 19 18:10:14.31: [ 5226]: --> [27:+FCI:"      01 73 29 18 18"]
Jan 19 18:10:14.31: [ 5226]: REMOTE CSI "01 73 29 18 18"
Jan 19 18:10:14.31: [ 5226]: --> [20:+FIS:1,3,0,2,1,0,0,4]
Jan 19 18:10:14.31: [ 5226]: --> [2:OK]
Jan 19 18:10:14.31: [ 5226]: REMOTE best rate 9600 bit/s
Jan 19 18:10:14.31: [ 5226]: REMOTE max page width 1728 pixels in 215 mm
Jan 19 18:10:14.31: [ 5226]: REMOTE max unlimited page length
Jan 19 18:10:14.31: [ 5226]: REMOTE best vres 7.7 line/mm
Jan 19 18:10:14.31: [ 5226]: REMOTE best format 2-D MR
Jan 19 18:10:14.32: [ 5226]: REMOTE best 20 ms, 10 ms/scanline
Jan 19 18:10:14.32: [ 5226]: USE 9600 bit/s
Jan 19 18:10:14.32: [ 5226]: USE 20 ms, 10 ms/scanline
Jan 19 18:10:14.32: [ 5226]: SEND file "docq/doc54.ps;00"
Jan 19 18:10:14.37: [ 5226]: USE page width 1728 pixels in 215 mm
Jan 19 18:10:14.37: [ 5226]: USE unlimited page length
Jan 19 18:10:14.37: [ 5226]: USE 3.85 line/mm
Jan 19 18:10:14.37: [ 5226]: USE 1-D MR
Jan 19 18:10:14.37: [ 5226]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
Jan 19 18:10:14.62: [ 5226]: --> [2:OK]
Jan 19 18:10:14.62: [ 5226]: <-- [7:AT+FDT\r]
Jan 19 18:10:14.90: [ 5226]: --> [20:+FCS:0,3,0,2,0,0,0,4]
Jan 19 18:10:20.78: [ 5226]: --> [7:CONNECT]
Jan 19 18:10:20.78: [ 5226]: SEND begin page
Jan 19 18:10:30.59: [ 5226]: SENT 15088 bytes of data
Jan 19 18:10:30.59: [ 5226]: SEND 1D RTC
Jan 19 18:10:37.80: [ 5226]: SEND end page
Jan 19 18:10:37.80: [ 5226]: SEND send MPS (more pages, same document)
Jan 19 18:11:00.11: [ 5226]: --> [7:+FHS:52]
Jan 19 18:11:00.11: [ 5226]: REMOTE HANGUP: No response to MPS repeated 3
times (code 52)
Jan 19 18:11:00.11: [ 5226]: <-- [5:ATH0\r]
Jan 19 18:11:00.23: [ 5226]: --> [2:OK]
Jan 19 18:11:00.23: [ 5226]: SESSION END