Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

send using whfc




Hi..
I'm using WHFC 1.0.5 to send a fax to local fax through the Hylafax
server. The things is nothing printout at the local fax altho the client
(whfc) shows that the job was sent to the local fax.

here is the log that i got

Jan 06 16:28:01.59: [  642]: SESSION BEGIN 00000016 635312872
Jan 06 16:28:01.60: [  642]: SEND FAX: JOB 10 DEST 5312872 COMMID
00000016
Jan 06 16:28:01.60: [  642]: DELAY 2600 ms
Jan 06 16:28:04.19: [  642]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 06 16:28:04.33: [  642]: --> [2:OK]
Jan 06 16:28:04.33: [  642]: <-- [12:ATS8=2S7=60\r]
Jan 06 16:28:04.47: [  642]: --> [2:OK]
Jan 06 16:28:04.47: [  642]: <-- [14:AT+FCLASS=2.0\r]
Jan 06 16:28:04.61: [  642]: --> [2:OK]
Jan 06 16:28:04.61: [  642]: <-- [9:AT+FLO=0\r]
Jan 06 16:28:04.75: [  642]: --> [2:OK]
Jan 06 16:28:04.75: [  642]: <-- [9:AT+FPP=0\r]
Jan 06 16:28:04.89: [  642]: --> [2:OK]
Jan 06 16:28:04.89: [  642]: <-- [9:AT+FBO=0\r]
Jan 06 16:28:05.03: [  642]: --> [2:OK]
Jan 06 16:28:05.03: [  642]: <-- [10:AT+FCT=30\r]
Jan 06 16:28:05.17: [  642]: --> [2:OK]
Jan 06 16:28:05.17: [  642]: <-- [15:AT+FNR=1,1,1,1\r]
Jan 06 16:28:05.32: [  642]: --> [2:OK]   
Jan 06 16:28:05.32: [  642]: <-- [9:AT+FIE=0\r]
Jan 06 16:28:05.46: [  642]: --> [2:OK]
Jan 06 16:28:05.46: [  642]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 06 16:28:05.61: [  642]: --> [2:OK]
Jan 06 16:28:05.61: [  642]: <-- [5:ATM0\r]
Jan 06 16:28:05.75: [  642]: --> [2:OK]
Jan 06 16:28:05.75: [  642]: <-- [14:AT+FCLASS=2.0\r]
Jan 06 16:28:05.99: [  642]: --> [2:OK]
Jan 06 16:28:05.99: [  642]: <-- [9:AT+FLO=0\r]
Jan 06 16:28:06.23: [  642]: --> [2:OK]
Jan 06 16:28:06.23: [  642]: <-- [9:AT+FPP=0\r]
Jan 06 16:28:06.47: [  642]: --> [2:OK]
Jan 06 16:28:06.47: [  642]: <-- [9:AT+FBO=0\r]
Jan 06 16:28:06.71: [  642]: --> [2:OK]
Jan 06 16:28:06.71: [  642]: <-- [10:AT+FCT=30\r]
Jan 06 16:28:06.95: [  642]: --> [2:OK]
Jan 06 16:28:06.95: [  642]: <-- [15:AT+FNR=1,1,1,1\r]         
Jan 06 16:28:07.19: [  642]: --> [2:OK]
Jan 06 16:28:07.19: [  642]: <-- [9:AT+FIE=0\r]
Jan 06 16:28:07.43: [  642]: --> [2:OK]
Jan 06 16:28:07.43: [  642]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 06 16:28:07.68: [  642]: --> [2:OK]
Jan 06 16:28:07.68: [  642]: <-- [30:AT+FLI="ACCULOGIC TECHNOLOGI"\r]
Jan 06 16:28:07.93: [  642]: --> [2:OK]
Jan 06 16:28:07.95: [  642]: DIAL 5312872
Jan 06 16:28:07.95: [  642]: <-- [12:ATDT5312872\r]
Jan 06 16:28:22.23: [  642]: --> [4:+FCO]
Jan 06 16:28:25.31: [  642]: --> [31:+FNF:
0000˙˙˙˙˙˙˙˙rI^P?˙˙˙˙˙˙$
Jan 06 16:28:25.31: [  642]: REMOTE NSF "
0000˙˙˙˙˙˙˙˙rI^P?˙˙˙˙˙˙$
Jan 06 16:28:25.31: [  642]: --> [27:+FCI:"             7249103"]
Jan 06 16:28:25.31: [  642]: REMOTE CSI "7249103"
Jan 06 16:28:25.31: [  642]: --> [20:+FIS:1,3,0,2,1,0,0,3]
Jan 06 16:28:25.31: [  642]: --> [2:OK]
Jan 06 16:28:25.31: [  642]: REMOTE best rate 9600 bit/s

Jan 06 16:28:25.31: [  642]: --> [2:OK]
Jan 06 16:28:25.31: [  642]: REMOTE best rate 9600 bit/s
Jan 06 16:28:25.31: [  642]: REMOTE max page width 1728 pixels in 215 mm
Jan 06 16:28:25.31: [  642]: REMOTE max unlimited page length
Jan 06 16:28:25.31: [  642]: REMOTE best vres 7.7 line/mm
Jan 06 16:28:25.31: [  642]: REMOTE best format 2-D MR
Jan 06 16:28:25.31: [  642]: REMOTE best 10 ms/scanline
Jan 06 16:28:25.31: [  642]: USE 9600 bit/s
Jan 06 16:28:25.31: [  642]: USE 10 ms/scanline
Jan 06 16:28:25.31: [  642]: <-- [5:ATH0\r]
Jan 06 16:28:25.55: [  642]: --> [2:OK]
Jan 06 16:28:25.55: [  642]: SESSION END





I have question here..
 Can i send .doc or .rtf or .txt file to the local fax to printout?

I did try type command at terminal

sendfax -n -d 5312872 <<eof
>Testing 123
>eof

and this things printout ta the local fax.

Can someone help me?
thanks
                                                  



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services