|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Error sending fax to some destination
Hi,
I'm able to send fax with Hylafax sucessfully. But for some
destination, Hylafax is receiving a "[5:ERROR]" error after sending "end
page".
I'm using a Motorola chip based modem fax class 1 and the last official
version of HylaFax running on a Linux Redhat 6.1 (i386) box.
Does anyone know of this problem?
P.S: I subscribe the mailing list this evening and I'm not sure I'm able to
receive mail from it, so please send me a copy of a eventual answer.
Thanks in advance
A. Quartini
mailto:quarto@numerica.it
Follow the log of the session:
Dec 23 19:45:47.34: [ 2319]: SESSION BEGIN 00000064 390310332311376
Dec 23 19:45:47.34: [ 2319]: SEND FAX: JOB 35 DEST 0332311376 COMMID
00000064
Dec 23 19:45:47.34: [ 2319]: DELAY 2600 ms
Dec 23 19:45:49.93: [ 2319]: <-- [15:ATE0V1Q0S0=0H1\r]
Dec 23 19:45:49.97: [ 2319]: --> [2:OK]
Dec 23 19:45:49.97: [ 2319]: <-- [12:ATS8=2S7=60\r]
Dec 23 19:45:50.00: [ 2319]: --> [2:OK]
Dec 23 19:45:50.00: [ 2319]: <-- [12:AT+FCLASS=1\r]
Dec 23 19:45:50.03: [ 2319]: --> [2:OK]
Dec 23 19:45:50.03: [ 2319]: <-- [5:ATM0\r]
Dec 23 19:45:50.05: [ 2319]: --> [2:OK]
Dec 23 19:45:50.05: [ 2319]: <-- [12:AT+FCLASS=1\r]
Dec 23 19:45:50.18: [ 2319]: --> [2:OK]
Dec 23 19:45:50.19: [ 2319]: DIAL 0332311376
Dec 23 19:45:50.19: [ 2319]: <-- [18:ATX3DT0332311376@\r]
Dec 23 19:46:54.92: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:56.48: [ 2319]: --> [2:OK]
Dec 23 19:46:56.48: [ 2319]: <-- [9:AT+FRH=3\r]
Dec 23 19:46:56.51: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:57.17: [ 2319]: --> [2:OK]
Dec 23 19:46:57.17: [ 2319]: REMOTE CSI "0332 311376"
Dec 23 19:46:57.17: [ 2319]: <-- [9:AT+FRH=3\r]
Dec 23 19:46:57.19: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:57.44: [ 2319]: --> [2:OK]
Dec 23 19:46:57.44: [ 2319]: REMOTE best rate 9600 bit/s
Dec 23 19:46:57.44: [ 2319]: REMOTE max page width 1728 pixels in 215 mm
Dec 23 19:46:57.44: [ 2319]: REMOTE max unlimited page length
Dec 23 19:46:57.44: [ 2319]: REMOTE best vres 7.7 line/mm
Dec 23 19:46:57.44: [ 2319]: REMOTE best format 2-D MMR
Dec 23 19:46:57.44: [ 2319]: REMOTE supports T.30 Annex A, ECM
Dec 23 19:46:57.44: [ 2319]: REMOTE best 10 ms/scanline
Dec 23 19:46:57.44: [ 2319]: USE 9600 bit/s
Dec 23 19:46:57.44: [ 2319]: USE 10 ms/scanline
Dec 23 19:46:57.44: [ 2319]: SEND file "docq/doc34.ps;00"
Dec 23 19:46:57.45: [ 2319]: USE page width 1728 pixels in 215 mm
Dec 23 19:46:57.45: [ 2319]: USE unlimited page length
Dec 23 19:46:57.45: [ 2319]: USE 3.85 line/mm
Dec 23 19:46:57.45: [ 2319]: USE 1-D MR
Dec 23 19:46:57.45: [ 2319]: SEND training at v.29 9600 bit/s
Dec 23 19:46:57.45: [ 2319]: <-- [9:AT+FTH=3\r]
Dec 23 19:46:57.63: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:57.63: [ 2319]: <-- data [23]
Dec 23 19:46:57.63: [ 2319]: <-- data [2]
Dec 23 19:46:59.25: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:59.25: [ 2319]: <-- data [6]
Dec 23 19:46:59.25: [ 2319]: <-- data [2]
Dec 23 19:46:59.65: [ 2319]: --> [2:OK]
Dec 23 19:46:59.65: [ 2319]: DELAY 75 ms
Dec 23 19:46:59.73: [ 2319]: <-- [10:AT+FTM=96\r]
Dec 23 19:46:59.76: [ 2319]: --> [7:CONNECT]
Dec 23 19:46:59.76: [ 2319]: <-- data [1024]
Dec 23 19:46:59.76: [ 2319]: <-- data [776]
Dec 23 19:46:59.76: [ 2319]: <-- data [2]
Dec 23 19:47:01.55: [ 2319]: --> [2:OK]
Dec 23 19:47:01.55: [ 2319]: <-- [9:AT+FRH=3\r]
Dec 23 19:47:01.85: [ 2319]: --> [7:CONNECT]
Dec 23 19:47:02.89: [ 2319]: --> [2:OK]
Dec 23 19:47:02.89: [ 2319]: TRAINING succeeded
Dec 23 19:47:02.89: [ 2319]: <-- [10:AT+FTM=96\r]
Dec 23 19:47:03.09: [ 2319]: --> [7:CONNECT]
Dec 23 19:47:03.09: [ 2319]: SEND begin page
Dec 23 19:47:03.10: [ 2319]: <-- data [1028]
Dec 23 19:47:03.10: [ 2319]: <-- data [1028]
Dec 23 19:47:03.10: [ 2319]: <-- data [1036]
Dec 23 19:47:03.10: [ 2319]: <-- data [1038]
Dec 23 19:47:05.09: [ 2319]: <-- data [1026]
Dec 23 19:47:05.09: [ 2319]: <-- data [1031]
Dec 23 19:47:05.09: [ 2319]: <-- data [1029]
Dec 23 19:47:05.09: [ 2319]: <-- data [1031]
Dec 23 19:47:07.09: [ 2319]: <-- data [1030]
Dec 23 19:47:07.09: [ 2319]: <-- data [1035]
Dec 23 19:47:07.09: [ 2319]: <-- data [1027]
Dec 23 19:47:07.09: [ 2319]: <-- data [1030]
Dec 23 19:47:09.09: [ 2319]: <-- data [1029]
Dec 23 19:47:09.09: [ 2319]: <-- data [377]
Dec 23 19:47:09.09: [ 2319]: SENT 13688 bytes of data
Dec 23 19:47:09.09: [ 2319]: <-- data [1032]
Dec 23 19:47:09.09: [ 2319]: <-- data [1030]
Dec 23 19:47:11.08: [ 2319]: <-- data [1035]
Dec 23 19:47:11.08: [ 2319]: <-- data [1032]
Dec 23 19:47:11.08: [ 2319]: <-- data [1030]
Dec 23 19:47:11.08: [ 2319]: <-- data [1035]
Dec 23 19:47:13.08: [ 2319]: <-- data [1030]
Dec 23 19:47:13.08: [ 2319]: <-- data [1033]
Dec 23 19:47:13.08: [ 2319]: <-- data [1031]
Dec 23 19:47:13.08: [ 2319]: <-- data [1029]
Dec 23 19:47:15.08: [ 2319]: <-- data [1029]
Dec 23 19:47:15.08: [ 2319]: <-- data [1030]
Dec 23 19:47:15.08: [ 2319]: <-- data [1027]
Dec 23 19:47:17.07: [ 2319]: <-- data [425]
Dec 23 19:47:17.07: [ 2319]: SENT 13731 bytes of data
Dec 23 19:47:17.07: [ 2319]: <-- data [1031]
Dec 23 19:47:17.07: [ 2319]: <-- data [1027]
Dec 23 19:47:17.07: [ 2319]: <-- data [1024]
Dec 23 19:47:17.07: [ 2319]: <-- data [1026]
Dec 23 19:47:19.07: [ 2319]: <-- data [771]
Dec 23 19:47:19.07: [ 2319]: SENT 4867 bytes of data
Dec 23 19:47:19.07: [ 2319]: SEND 1D RTC
Dec 23 19:47:19.07: [ 2319]: <-- data [29]
Dec 23 19:47:19.07: [ 2319]: <-- data [2]
Dec 23 19:47:19.07: [ 2319]: SEND end page
Dec 23 19:47:19.07: [ 2319]: --> [5:ERROR]
Dec 23 19:47:19.07: [ 2319]: <-- [9:AT+FTH=3\r]
Dec 23 19:47:21.61: [ 2319]: --> [20:]
Dec 23 19:47:21.61: [ 2319]: <-- [5:ATH1\r]
Dec 23 19:47:26.61: [ 2319]: MODEM <Timeout>
Dec 23 19:47:26.61: [ 2319]: SESSION END
