Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Communication failure during Phase B/C



I'm getting an error message that I've never seen before I moved to a
different machine to run HylaFAX 4.0pl2 with a ZyXEL 1946E:

Communication failure during Phase B/C (modem protocol botch)

Looking at the log:
Dec 22 11:55:00.53: [ 5200]: SEND end page
Dec 22 11:55:08.49: [ 5200]: --> [2:]
Dec 22 11:55:08.49: [ 5200]: --> [2:OK]
Dec 22 11:55:08.49: [ 5200]: SEND send EOP (no more pages or documents)
Dec 22 11:55:08.49: [ 5200]: <-- [9:AT+FET=2\r]
Dec 22 11:55:55.17: [ 5200]: --> [7:+FPTS:2]
Dec 22 11:55:56.53: [ 5200]: --> [8:+FHNG:00]
Dec 22 11:55:56.53: [ 5200]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Dec 22 11:55:56.53: [ 5200]: SEND recv RTN (retrain negative)
Dec 22 11:55:56.53: [ 5200]: <-- [5:ATH0\r]
Dec 22 11:55:56.53: [ 5200]: --> [2:OK]
Dec 22 11:55:56.64: [ 5200]: SESSION END

Did the remote hung up prematurely and piss off HylaFAX...?  Is this more a
remote problem, or a symptom of a local misconfiguration?

Thanks in advance for any advice.
-Alan

=============
Alan Sparks, Principal Network Analyst       <asparks@cpd.harris.com>
Harris Corporation, Camarillo CA                   (805) 389-2430



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services