|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
SuSE 6.2 Hylafax SuSEfax - Help!
Hello,
I am looking for help or a clue as to what to do to get a fax sent from my laptop. I am
a new convert to Linux, and have installed SuSE 6.2 on my Winbook XL . Even have fishes
swimming around on my screen. But I can't shoot out a fax:-( Can someone
please help. I am an American in Moscow, Russia, so my resources are somewhat
limited. I installed hylafax and all the packages it needed to run, and
susefax and all the packages it needed to run as well. I have read the manuals
and SuSE's help documents on their site. I've searched deja, and found this
thread. I use a Linksys PCMCIA combo card 10/100 + 56 K. It seems to me that
I am not getting much feedback from SuSEfax, or I just don't know how to obtain
the feedback to figure out what is wrong. I deleted the contents of the
/var/log/sendfax.log, shutdown the computer, rebooted, tried to send a fax in
KDE using SuSEFAX. Nothing was written to the sendfax.log
*******I tried Poll Fax and tried Send Fax. This is what Get Status shows:
6 127 232-9274 D
7 /usr/home/george/Off root 232-9274 0:12
****** In "HylaFax Server State" window, I see:
HylaFAX scheduler on george.hello: Running
I followed the directions in the SuSE 6.2 manual for the Hylafax
configuration.
Here is some info. I tried to find everything I could. The
more the better I figured.
******* Contents of file /var/spool/fax/etc/host *************
localhost
127.0.0.1
********** After command faxstat -v as root, I get:
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 george.hello server (HylaFAX (tm) Version 4.0pl2) ready.
-> USER root
230 User root logged in.
-> PORT 127,0,0,1,4,110
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on george.hello: Running
226 Transfer complete.
****** Excerpt from /var/log/messages which shows HylaFax starting up
Dec 15 14:09:08 george syslogd 1.3-3: restart.
Dec 15 14:09:09 george kernel: klogd 1.3-3, log source = /proc/kmsg started.
Dec 15 14:09:09 george kernel: Inspecting /boot/System.map
Dec 15 14:09:09 george kernel: Loaded 8279 symbols from /boot/System.map.
Dec 15 14:09:09 george kernel: Symbols match kernel version 2.2.10.
Dec 15 14:09:09 george kernel: Loaded 58 symbols from 7 modules.
Dec 15 14:09:09 george kernel: Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
Dec 15 14:09:09 george kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Dec 15 14:09:09 george kernel: ttyS02 at 0x03e8 (irq = 4) is a 16550A
Dec 15 14:09:09 george kernel: Linux PCMCIA Card Services 3.0.13
Dec 15 14:09:09 george kernel: kernel build: 2.2.10 #1 Thu Jul 22 14:06:40 GMT 1999
Dec 15 14:09:09 george kernel: options: [pci] [cardbus]
Dec 15 14:09:09 george kernel: Intel PCIC probe:
Dec 15 14:09:09 george kernel: TI 1131 PCI-to-CardBus at bus 0 slot 3, mem 0x68000000, 2 sockets
Dec 15 14:09:09 george kernel: host opts [0]: [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34]
Dec 15 14:09:09 george kernel: host opts [1]: [pci + serial irq] [no pci irq] [lat 168/176] [bus 35/37]
Dec 15 14:09:09 george kernel: ISA irqs (scanned) = 3,4,7,9,10,15 status change on irq 15
Dec 15 14:09:09 george kernel: cs: IO port probe 0x1000-0x17ff: clean.
Dec 15 14:09:09 george kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f 0x4d0-0x4d7
Dec 15 14:09:09 george kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Dec 15 14:09:09 george kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Dec 15 14:09:09 george kernel: eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:E0:98:08:29:56
Dec 15 14:09:09 george kernel: tty01 at 0x02f8 (irq = 3) is a 16550A
Dec 15 14:09:13 george /usr/sbin/cron[148]: (CRON) STARTUP (fork ok)
Dec 15 14:09:15 george FaxQueuer[185]: Missing ':' separator in modem class specification
Dec 15 14:09:15 george FaxQueuer[185]: HylaFAX (tm) Version 4.0pl2
Dec 15 14:09:15 george FaxQueuer[185]: Copyright (c) 1990-1996 Sam Leffler
Dec 15 14:09:15 george FaxQueuer[185]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Dec 15 14:09:16 george HylaFAX[186]: HylaFAX INET Protocol Server: restarted.
Dec 15 14:09:16 george HylaFAX[186]: HylaFAX Old Protocol Server: restarted.
Dec 15 14:09:16 george HylaFAX[186]: HylaFAX SNPP Protocol Server: restarted.
Dec 15 14:09:24 george login: pam_unix session started for user root, service login
<snip>
****** Further excerpt from var/log/messages after running SuSEFAX
<snip>
Dec 15 14:14:17 george HylaFAX[1215]: Filesystem has SysV-style file creation semantics.
Dec 15 14:14:17 george FaxQueuer[185]: SUBMIT JOB 5
Dec 15 14:17:37 george HylaFAX[1258]: Filesystem has SysV-style file creation semantics.
Dec 15 14:17:37 george FaxQueuer[185]: SUBMIT JOB 6
Dec 15 14:18:18 george HylaFAX[1259]: Filesystem has SysV-style file creation semantics.
Dec 15 14:18:18 george FaxQueuer[185]: SUBMIT JOB 7
<snip>
******** Excerpt from file /etc/inittab showing getty settings:
<snip>
# getty-programs for the normal runlevels
# <id>:<runlevels>:<action>:<process>
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
1:123:respawn:/sbin/mingetty --noclear tty1
2:123:respawn:/sbin/mingetty tty2
3:123:respawn:/sbin/mingetty tty3
4:123:respawn:/sbin/mingetty tty4
5:123:respawn:/sbin/mingetty tty5
6:123:respawn:/sbin/mingetty tty6
<snip>
******* In directory /var/spool/fax I have the files
COPYRIGHT
FIFO
FIFO.modem
FIFO.ttyS1
Note: Am I supposed to have a FIFO.ttyS1 file, since I set my modem to /dev/modem?
**** Contents of /var/spool/fax/etc/setup.cache ***************
# Warning, this file was automatically generated by faxsetup
# on Mon Dec 13 12:04:51 /etc/localtime 1999 for root
AFMDIR='/usr/share/hylafax/afm'
AWK='/usr/bin/gawk'
BIN='/usr/bin'
CAT='/bin/cat'
CHGRP='/bin/chgrp'
CHMOD='/bin/chmod'
CHOWN='/bin/chown'
CP='/bin/cp'
DPSRIP='/usr/local/sbin/ps2fax.exe'
ECHO='/bin/echo'
GREP='/usr/bin/grep'
GSRIP='/usr/bin/gs'
IMPRIP='/usr/lib/print/psrip'
LIBDATA='/usr/lib/fax'
LIBEXEC='/usr/lib/fax'
LN='/bin/ln'
MANDIR='/usr/man'
MKFIFO='/usr/bin/mkfifo'
MV='/bin/mv'
PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin'
PATHEGETTY='/usr/sbin/egetty'
PATHGETTY='/usr/sbin/mgetty'
PATHVGETTY='/usr/sbin/vgetty'
PSPACKAGE='gs'
RM='/bin/rm'
SBIN='/usr/sbin'
SCRIPT_SH='/bin/bash'
SED='/usr/bin/sed'
SENDMAIL='/usr/sbin/sendmail'
SPOOL='/var/spool/fax'
TIFFBIN='/usr/bin'
UUCP_LOCKDIR='/var/lock'
UUCP_LOCKTYPE='ascii'
****** Contents of config.modem *******************
# $Id: class2,v 1.23 1996/06/24 02:58:32 sam Rel $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Generic Class 2 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 7
AreaCode: 095
FAXNumber: +7.095.944.1415
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 527
SessionTracing: 527
RecvFileMode: 0644
LogFileMode: 0600
DeviceMode: 0666
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-r -b -s %s %l"
LocalIdentifier: "S.u.S.E. GmbH"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to supply a hint
#ModemRate: 19200 # max rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
# We normally append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd: ATDT%s@ # T for tone dialing, @ for silence
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem is reset
#ModemAnswerCmd: ATA # use this to answer phone
#ModemNoFlowCmd: AT&K # disable flow control cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook (hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
# Configuration parameters for Class 2 modems.
#
Class2Cmd: AT+FCLASS=2 # command to enter class 2
Class2BORCmd: AT+FBOR=0 # bit order for phase B/C/D (direct)
Class2RELCmd: AT+FREL=1 # byte-align EOL codes on recv
Class2CQCmd: "" # commands to enable copy quality proc.
Class2AbortCmd: AT+FK # abort session command
Class2CQQueryCmd: AT+FCQ=? # query for copy quality capabilities
Class2DCCQueryCmd: AT+FDCC=? # query for modem capabilities
Class2TBCCmd: AT+FTBC=0 # setup stream mode
Class2CRCmd: AT+FCR=1 # enable capability to receive
Class2PHCTOCmd: AT+FPHCTO=30 # set phase C timeout parameter
Class2BUGCmd: AT+FBUG=1 # enable HDLC frame tracing
Class2LIDCmd: AT+FLID # set local identifier command
Class2DCCCmd: AT+FDCC # set modem capabilities command
Class2DISCmd: AT+FDIS # set session parameters command
Class2DDISCmd: "" # disable pre-dial DIS command hack
Class2CIGCmd: AT+FCIG # set polling identifier command
Class2PTSCmd: AT+FPTS # set post-page status command
Class2SPLCmd: AT+FSPL # set polling indicator command
#
# If Class2RecvDataTrigger is not set, then it is set to DC1
#
Class2RecvDataTrigger: "" # character sent to modem to start recv
Class2XmitWaitForXON: yes # if true, wait for XON before send
