Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Modem capabilities



Hi 
I´m running a Hylafax 4.ß pl1 on a Solaris 2.5.1 and Hylafax newest beta
on Solaris 2.4
with Multitech MT1432BG modems Firmware Rev. 1.16b
everything works fine except the following:

We have a destination that only receives faxes correct when they are
transmitted with
9600 Baud and 20ms Scantime. Every other config does not work
(I guess the other end is a windoze box with a teles-isdn-card running a
lousy software
not caring about any standards).
Watching the log-files while my modem is taking to the other end is
quite funny.
one time both are connecting with 9600 Baud, the next time just with
2400 Baud.
the log says:
REMOTE best speed 2400 bit/s resp. 
REMOTE best speed 9600 bit/s.

Is there any possibility to tell hylafax to use only 9600 Baud for every
call to that
destination (I read the man page for sendfax and know the -B and -b
options
also the MinSpeed and DesiredSpeed Parameters in the conf-file but they
don't help
me on my problem)
The modem works as class2 modem
any ???
tia
/Matthias
-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880599
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@hagos.de
Germany



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services