flexfax: sends to a phone but not a fax machine!

[Marina.Daniels@cs.tas.gov.au (Marina Daniels)]

     I have compiled hylaFAX 4.0pl2 on Solaris 2.6, and I am trying to set 
     it up now.
     
     When I type:
     
     sendfax -R -f "root" -n -d 62337644 hellotest
     
     it rings my phone ok and I get an email message which includes
     "SEND FAILED: Busy signal detected" and then it is requeued.
     
     ****BUT when I try to send it to our fax machine it says:
     
     Your facsimile job to 62337222 was not sent because:
     Unknown problem (check modem power)
     
     The job will be retried at 14:41.
     
     ---- Transcript of session follows ----
     
     Nov 09 14:36:29.06: [25555]: SESSION BEGIN 00000033 62337222
     Nov 09 14:36:29.06: [25555]: SEND FAX: JOB 14 DEST 62337222 COMMID 
     00000033 Nov 09 14:36:29.06: [25555]: DELAY 2600 ms
     Nov 09 14:36:32.03: [25555]: <-- [15:ATE0V1Q0S0=0H0\r] Nov 09 
     14:36:33.17: [25555]: --> [2:OK]
     Nov 09 14:36:33.17: [25555]: <-- [21:ATS8=2S7=90&K4&D2&C1\r] Nov 09 
     14:36:33.29: [25555]: --> [2:OK]
     Nov 09 14:36:33.29: [25555]: <-- [12:AT+FCLASS=2\r] Nov 09 
     14:36:33.39: [25555]: --> [2:OK]
     Nov 09 14:36:33.39: [25555]: <-- [10:AT+FTBC=0\r] Nov 09 14:36:33.49: 
     [25555]: --> [2:OK]
     Nov 09 14:36:33.49: [25555]: <-- [10:AT+FBOR=0\r] Nov 09 14:36:33.59: 
     [25555]: --> [2:OK]
     Nov 09 14:36:33.59: [25555]: <-- [13:AT+FPHCTO=30\r] Nov 09 
     14:36:33.69: [25555]: --> [2:OK]
     Nov 09 14:36:33.69: [25555]: <-- [24:AT+FDCC=1,5,0,2,1,0,0,0\r] Nov 09 
     14:36:33.80: [25555]: --> [2:OK]
     Nov 09 14:36:33.80: [25555]: <-- [5:ATM0\r] Nov 09 14:36:33.90: 
     [25555]: --> [2:OK]
     Nov 09 14:36:33.93: [25555]: <-- [12:AT+FCLASS=2\r] Nov 09 
     14:36:34.13: [25555]: --> [2:OK]
     Nov 09 14:36:34.13: [25555]: <-- [10:AT+FTBC=0\r] Nov 09 14:36:34.33: 
     [25555]: --> [2:OK]
     Nov 09 14:36:34.33: [25555]: <-- [10:AT+FBOR=0\r] Nov 09 14:36:34.53: 
     [25555]: --> [2:OK]
     Nov 09 14:36:34.53: [25555]: <-- [13:AT+FPHCTO=30\r] Nov 09 
     14:36:34.73: [25555]: --> [2:OK]
     Nov 09 14:36:34.73: [25555]: <-- [24:AT+FDCC=1,5,0,2,1,0,0,0\r] Nov 09 
     14:36:34.94: [25555]: --> [2:OK]
     Nov 09 14:36:34.94: [25555]: <-- [24:AT+FLID="+610362337222"\r] Nov 09 
     14:36:35.15: [25555]: --> [2:OK]
     Nov 09 14:36:35.15: [25555]: DIAL 62337222
     Nov 09 14:36:35.15: [25555]: <-- [14:ATDT062337222\r] Nov 09 
     14:36:50.47: [25555]: --> [4:+FCO]
     Nov 09 14:36:50.47: [25555]: SEND FAILED: Unknown problem (check modem 
     power) Nov 09 14:36:50.47: [25555]: <-- [5:ATH0\r]
     Nov 09 14:36:50.47: [25555]: --> [125:+FNF:00 00 79 00 00 00 96 7F 09 
     13 00 10 00 12 85 C0 D0 F8 80 01 01 49 02 54 2E 4D 2E 44 2E 20 26 20 
     43 2E 53 2E 20 20 20 03 ]
     Nov 09 14:36:50.63: [25555]: --> [27:+FCI:"        03 6233 7222"] Nov 
     09 14:36:50.63: [25555]: --> [20:+FIS:1,5,0,2,1,0,0,0]
     Nov 09 14:36:50.63: [25555]: --> [2:OK] Nov 09 14:36:50.63: [25555]: 
     SESSION END
     
     
     
     I have tried two different fax machines, does anyone know what the 
     problem could be? The modem is definitely on, I can talk to it with 
     "tip hardwire"
     
     Marina