flexfax: very strange fax recieve problems

[Thomas Jarosch <thomas.jarosch@styletec.de>]

Hello,

I'm using HylaFAX for quite a long time now and I never experienced
any problems. But from a certain fax machiene I only recieve junk data.
As you can see it's not a modem connection problem [isn't it? :-)].
Normal full-page A4 pages have more than 46 lines of data and I
think, that 29kb of data is too much for just 46 lines...

When I try to view the file it's just pure junk.
So what's wrong with it?

Thanks in advance, Thomas.


my setup
-------------------------------------------------------------------------
Hardware: Courier V. Everything
(with "Class2DDISCmd: AT+FDIS", but doesn't matter anyway)
OS: Linux 2.2.13 based upon Redhat 6.0
Software: HylaFAX 4.0pl2

HylaFAX log
-------------------------------------------------------------------------
File: c00000101         Col 0              2303 bytes
Nov 05 14:53:10.88: [  707]: SESSION BEGIN 00000101 497071980605
Nov 05 14:53:10.88: [  707]: <-- [4:ATA\r]
Nov 05 14:53:17.58: [  707]: --> [4:+FCO]
Nov 05 14:53:17.58: [  707]: ANSWER: FAX CONNECTION
Nov 05 14:53:17.58: [  707]: RECV FAX: begin
Nov 05 14:53:19.30: [  707]: --> [27:+FTI:"     +49 721 9137420"]
Nov 05 14:53:19.30: [  707]: REMOTE TSI "+49 721 9137420"
Nov 05 14:53:19.58: [  707]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Nov 05 14:53:19.58: [  707]: REMOTE wants 14400 bit/s
Nov 05 14:53:19.58: [  707]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 14:53:19.58: [  707]: REMOTE wants unlimited page length
Nov 05 14:53:19.58: [  707]: REMOTE wants 7.7 line/mm
Nov 05 14:53:19.58: [  707]: REMOTE wants 1-D MR
Nov 05 14:53:19.73: [  707]: --> [2:OK]
Nov 05 14:53:19.73: [  707]: <-- [7:AT+FDR\r]
Nov 05 14:53:23.16: [  707]: --> [20:+FCS:1,5,0,2,0,0,0,0]
Nov 05 14:53:23.16: [  707]: REMOTE wants 14400 bit/s
Nov 05 14:53:23.16: [  707]: REMOTE wants page width 1728 pixels in 215 mm
Nov 05 14:53:23.16: [  707]: REMOTE wants unlimited page length
Nov 05 14:53:23.16: [  707]: REMOTE wants 7.7 line/mm
Nov 05 14:53:23.16: [  707]: REMOTE wants 1-D MR
Nov 05 14:53:25.17: [  707]: --> [7:CONNECT]
Nov 05 14:53:25.17: [  707]: RECV: begin page
Nov 05 14:53:25.17: [  707]: RECV: send trigger 022
Nov 05 14:53:25.17: [  707]: <-- data [1]
Nov 05 14:53:42.39: [  707]: RECV: 29771 bytes of data, 46 total lines
Nov 05 14:53:42.39: [  707]: --> [15:+FPS:1,47,0,0,0]
Nov 05 14:53:43.88: [  707]: --> [6:+FET:2]
Nov 05 14:53:43.88: [  707]: RECV recv EOP (no more pages or documents)
Nov 05 14:53:43.88: [  707]: --> [2:OK]
Nov 05 14:53:43.88: [  707]: RECV send MCF (message confirmation)
Nov 05 14:53:43.88: [  707]: RECV FAX (00000101): from +49 721 9137420, page 1 in 0:24, INF, 7.7 line/mm, 1-D MR
Nov 05 14:53:43.88: [  707]: RECV FAX (00000101): recvq/fax00029.tif from +49 721 9137420, route to <unspecified>, 1
Nov 05 14:53:43.88: [  707]: <-- [7:AT+FDR\r]
Nov 05 14:53:46.94: [  707]: --> [7:+FHS:00]
Nov 05 14:53:46.94: [  707]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Nov 05 14:53:46.94: [  707]: RECV FAX: bin/faxrcvd "recvq/fax00029.tif" "modem" "00000101" ""
Nov 05 14:53:47.33: [  707]: RECV FAX: end
Nov 05 14:53:47.33: [  707]: SESSION END