|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
faxgetty/mgetty problems
We're having a fair problem with our general setup. HylaFAX4.01-pl2,
mgetty-1.0.0 and faxgetty? Netcomm Roadster II modems on Linux 2.2.9
Here is the relevant config.ttyE7 file...
GettyArgs: "-s 115200 -x 4"
ModemType: Class2 # use class 2 interface
ModemRate: 38400
ModemFlowControl: rtscts # default
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive
ModemDialCmd: ATDT0%s # escape our PABX
1 - we cannot receive faxes
2 - mgetty works with wins clients, not linux pppd callers
3 - faxgetty is not calling mgetty properly
1 - Simply put, dialling a number results in a
"SEND FAILED : Ring detect without successful handshake" error. faxgetty
is installed on the incoming line and seems to distinguish between a data
and fax connection.
2 - Anyone know of the proper options pppd callers should include? ;)
3 - When I say "not calling properly" I mean faxgetty starts, recognizes
the DATA CONNECTION (according to the logs) but when I check it dialling
via windows, the popup screen is entirely black and I get disconnected
from the server.
/sbin/getty is a symbolic link to /usr/local/sbin/mgetty, and the GettyArgs
get picked up fine in the logs.
Oct 26 16:48:29.66: [ 5409]: SESSION BEGIN 00000377 6103610394880184
Oct 26 16:48:29.67: [ 5409]: <-- [4:ATA\r]
Oct 26 16:48:50.95: [ 5409]: --> [4:DATA]
Oct 26 16:48:50.95: [ 5409]: ANSWER: DATA CONNECTION
Oct 26 16:48:50.96: [ 5409]: GETTY: START "/sbin/getty -s 115200 -x 4", pid 28221
Oct 26 16:48:51.11: [ 5409]: GETTY: exit status 01000
Oct 26 16:48:51.11: [ 5409]: SESSION END
Any help appreciated
David
