Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

No response to EOP



Hi there everyone!

I recently set up HylaFAX 4.1beta1 on RedHat 6.0 using the RPMs. After all
the reading, and finally getting my modem (A USRobotics Sportster v.90) to
handshake properly with a Panasonic KX-F700 fax machine, I have one last
problem left. HylaFAX keeps on resending the fax (test fax, a single one).
The output is okay naman, but I guess for the computer it's not enough.

I checked the logs and found the following pertinent information:

Sep 28 16:36:58.35: [ 7625]: <-- data [9]
Sep 28 16:36:58.35: [ 7625]: SEND end page
Sep 28 16:36:58.35: [ 7625]: SEND send EOP (no more pages or documents)
Sep 28 16:36:58.35: [ 7625]: <-- data [2]
Sep 28 16:37:22.03: [ 7625]: --> [7:+FHS:54]
Sep 28 16:37:22.03: [ 7625]: REMOTE HANGUP: No response to EOP repeated 3
times (code 54)

Hmmmmm ...

I've got my maximum bad lines, and minimum percent good set to the
defaults implicitly (5 and 95 respectively). I'm using most of the configs
from the usr-2.0 example file in config/. This is a Class 2.0 modem and
it's got AT+FCLASS=2.0 set as its Class2Cmd.

Would there be any way to fix this? Any ideas? Muchos gracias and please
pardon the potential lameness. :-)

   [        Jijo Sevilla         ]
   [ jijo@leather-collection.com ]
   [ eFax # :  +1 (707) 988-0887 ]



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services