Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

found the error, but no solution



i now found out why my received faxes in low-resolution are pressed to 50% of
the page. the log:

--- snip ---
Sep 22 22:10:09.61: [  315]: REMOTE wants page width 1728 pixels in 215 mm
Sep 22 22:10:09.61: [  315]: REMOTE wants unlimited page length
Sep 22 22:10:09.61: [  315]: REMOTE wants 3.85 line/mm
Sep 22 22:10:09.61: [  315]: REMOTE wants 1-D MR
Sep 22 22:10:09.61: [  315]: --> [7:CONNECT]
Sep 22 22:10:09.61: [  315]: RECV: begin page
Sep 22 22:10:09.61: [  315]: RECV: send trigger 022
Sep 22 22:10:09.61: [  315]: <-- data [1]
*** Sep 22 22:11:26.88: [  315]: RECV: 1139 total lines, 0 bad lines, 0
consecutive bad lines   <<<===== received 1139 lines
*** Sep 22 22:11:26.88: [  315]: --> [17:+FPTS: 1,2219,0,0] <<<<<=====  modem
reports 2219
Sep 22 22:11:28.29: [  315]: --> [7:+FET: 2]
Sep 22 22:11:28.29: [  315]: RECV recv EOP (no more pages or documents)
Sep 22 22:11:28.29: [  315]: --> [2:OK]
Sep 22 22:11:28.31: [  315]: RECV send MCF (message confirmation)
Sep 22 22:11:28.31: [  315]: RECV FAX (00000048): from <UNSPECIFIED>, page 1 in
1:22, INF, 3.85 line/mm, 1-D MR
Sep 22 22:11:28.33: [  315]: RECV FAX (00000048): recvq/fax00032.tif from
<UNSPECIFIED>, route to <u
--- snip ---

in high resolution i get 2290 lines received and this is why it looks fine.
this happens on both modems the same way. one is a best-data 14400 with
rockwell chipset and one is a us-robotics.

does somebody know how to patch hylafax to take the received lines for
calculating the tiff insted of the FPTS value? i am running 4.0pl2 under
freebsd 3.2 on both machines. except that low-resolution receiving thing i
would be ready for going on the production machines.

many thanks,

------------------------------------------------------------------
Karl M. Joch   STOC#806   Pan 96 Red
"Wer die Freiheit aufgibt, um Sicherheit zu gewinnen,
der wird am Ende beides verlieren"             (Benjamin Franklin)
karl@proline.at
http://st1100.proline.at



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services