Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

No pages send



I had install hylafax-4-1beta1-1rh6.i386.rpm to my Redhat 6.0 linux
server.

The installation complete successfully. I reboot the server and issue the
faxsend command "faxsend modem".

When I try to send a fax from my Windows Fax client- WHFC.
The fax server dail to the remote fax machine but nothing had been
sending out.

The trace of the session log is as below, hope someone can help me
with this - only the last few lines are included:

Sep 22 12:01:14.41: [  749]: REMOTE best 10 ms/scanline
Sep 22 12:01:14.41: [  749]: USE 14400 bit/s
Sep 22 12:01:14.41: [  749]: USE 10 ms/scanline
Sep 22 12:01:14.41: [  749]: <-- [5:ATH0\r]
Sep 22 12:01:14.65: [  749]: --> [2:OK]
Sep 22 12:01:14.65: [  749]: SESSION END


Anyone out there facing the same problems ?



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services