|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Modem wedget
Hallo
My configuration
SCO Open Server 5.0.5
HylaFax v4.1beta2 compiled from source with cc
Modem Zyxel U-1496E plus on /dev/tty1A
Receiving is OK.
I have problem with sending faxes. If I send fax then modem wedget.
Problem is
in reseting modem with command
AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0.
FaxGetty is reseting modem successfuly
Sep 6 12:46:14 sco FaxGetty[14290]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:46:14 sco FaxGetty[14290]: --> [2:OK]
but FaxSend unsuccessfuly
Sep 6 12:46:37 sco FaxSend[14297]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:46:42 sco FaxSend[14297]: MODEM TIMEOUT: reading line from
modem
First question: Why ?
Second Question:
I found in man pages in System-specific Guidance:
SCO Guidance
The standard SCO serial I/O driver (SIO) does nothing with modem control
lines
if CLOCAL is set on the tty device. The usual workaround is to use the
FAS driver instead.
What is it FAS driver ?
Thanks for every idea!
------------------------------------------------------------------------------
Log of folowing jobs:
faxsetup
sendfax -d 15 /etc/passwd
faxrm 16
faxsetup
ServerTracing: 189
Sep 6 12:46:08 sco FaxQueuer[14063]: QUIT
Sep 6 12:46:08 sco HylaFAX[14274]: HylaFAX INET Protocol Server:
restarted.
Sep 6 12:46:08 sco FaxQueuer[14272]: HylaFAX (tm) Version 4.1beta2
Sep 6 12:46:08 sco FaxQueuer[14272]: Copyright (c) 1990-1996 Sam
Leffler
Sep 6 12:46:08 sco FaxQueuer[14272]: Copyright (c) 1991-1996 Silicon
Graphics, Inc.
Sep 6 12:46:08 sco FaxGetty[14081]: HELLO
Sep 6 12:46:10 sco FaxGetty[14081]: QUIT
Sep 6 12:46:10 sco FaxGetty[14081]: CLOSE /dev/tty1A
Sep 6 12:46:10 sco FaxGetty[14081]: <-- [5:ATH0\r]
Sep 6 12:46:10 sco FaxGetty[14081]: --> [2:OK]
Sep 6 12:46:10 sco FaxGetty[14081]: MODEM set DTR OFF
Sep 6 12:46:10 sco FaxGetty[14081]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:46:11 sco FaxGetty[14290]: OPEN /dev/tty1A
Sep 6 12:46:11 sco FaxGetty[14290]: MODEM set DTR OFF
Sep 6 12:46:11 sco FaxGetty[14290]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:46:14 sco FaxGetty[14290]: MODEM set DTR ON
Sep 6 12:46:14 sco FaxGetty[14290]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Sep 6 12:46:14 sco FaxGetty[14290]: MODEM flush i/o
Sep 6 12:46:14 sco FaxGetty[14290]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:46:14 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:14 sco FaxGetty[14290]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Sep 6 12:46:14 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:14 sco FaxGetty[14290]: <-- [12:AT+FCLASS=?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [11:0,2,2.0,6,8]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports "Data"
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports "Class 2"
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports "Class 2.0"
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports "Voice"
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [14:AT+FCLASS=2.0\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [8:AT+FMI?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [5:ZyXEL]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM: Mfr ZyXEL
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [8:AT+FMM?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [18:U1496E V 6.21 P ]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [8:AT+FMR?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [18:U1496E V 6.21 P ]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM: Model U1496E
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM: Revision V 6.21 P
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 3.85 line/mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 7.7 line/mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 2400 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 4800 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 7200 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 9600 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 12000 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 14400 bit/s
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports page width 1728
pixels in 215 mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports page width 2048
pixels in 255 mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports page width 2432
pixels in 303 mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports page width 1216
pixels in 151 mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports page width 864
pixels in 107 mm
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports A4 page length (297
mm)
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports B4 page length (364
mm)
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports unlimited page
length
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 1-D MR
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 2-D MR
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 0 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 5 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 10 ms, 5 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 10 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 20 ms, 10
ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 20 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 40 ms, 20
ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 40 ms/scanline
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [9:AT+FCQ=?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [11:(0-2),(0-2)]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: MODEM Supports 1D+2D copy quality
checking (but not enabled)
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [9:AT+FAP=?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [5:ERROR]
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [9:AT+FSP=?\r]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [3:0,1]
Sep 6 12:46:15 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:15 sco FaxGetty[14290]: <-- [14:AT+FCLASS=2.0\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [9:AT+FLO=2\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [9:AT+FPP=0\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [9:AT+FBO=0\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [10:AT+FCT=30\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [9:AT+FIE=0\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Sep 6 12:46:16 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:16 sco FaxGetty[14290]: MODEM ZYXEL U1496E/V 6.21 P
Sep 6 12:46:16 sco FaxGetty[14290]: <-- [5:ATM0\r]
Sep 6 12:46:17 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:17 sco FaxGetty[14290]: <-- [9:AT+FCR=1\r]
Sep 6 12:46:17 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:17 sco FaxGetty[14290]: <-- [25:AT+FLI=""\r]
Sep 6 12:46:17 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:17 sco FaxGetty[14290]: <-- [9:AT+FAA=1\r]
Sep 6 12:46:17 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:46:17 sco FaxGetty[14290]: MODEM input buffering disabled
Sep 6 12:46:31 sco HylaFAX[14292]: Filesystem has SysV-style file
creation semantics.
Sep 6 12:46:31 sco FaxQueuer[14272]: SUBMIT JOB 16
Sep 6 12:46:34 sco FaxSend[14297]: MODEM set DTR OFF
Sep 6 12:46:34 sco FaxSend[14297]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:46:37 sco FaxSend[14297]: MODEM set DTR ON
Sep 6 12:46:37 sco FaxSend[14297]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Sep 6 12:46:37 sco FaxSend[14297]: MODEM flush i/o
Sep 6 12:46:37 sco FaxSend[14297]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:46:42 sco FaxSend[14297]: MODEM TIMEOUT: reading line from
modem
Sep 6 12:46:42 sco FaxSend[14297]: MODEM <Timeout>
Sep 6 12:46:42 sco FaxSend[14297]: MODEM set DTR OFF
Sep 6 12:46:42 sco FaxSend[14297]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:46:44 sco FaxSend[14297]: MODEM set DTR ON
Sep 6 12:46:44 sco FaxSend[14297]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Sep 6 12:46:44 sco FaxSend[14297]: MODEM flush i/o
Sep 6 12:46:44 sco FaxSend[14297]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:46:49 sco FaxSend[14297]: MODEM TIMEOUT: reading line from
modem
Sep 6 12:46:49 sco FaxSend[14297]: MODEM <Timeout>
Sep 6 12:46:49 sco FaxSend[14297]: MODEM set DTR OFF
Sep 6 12:46:49 sco FaxSend[14297]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:46:50 sco FaxSend[14297]: /dev/tty1A: Can not initialize
modem.
Sep 6 12:46:53 sco FaxQueuer[14272]: KILL JOB 16
Sep 6 12:46:53 sco FaxSend[14297]: CAUGHT SIGNAL 15
Sep 6 12:46:53 sco FaxQueuer[14272]: NOTIFY: bin/notify "doneq/q16"
"killed" ""
Sep 6 12:47:03 sco FaxQueuer[14272]: QUIT
Sep 6 12:47:04 sco FaxQueuer[14439]: HylaFAX (tm) Version 4.1beta2
Sep 6 12:47:04 sco FaxQueuer[14439]: Copyright (c) 1990-1996 Sam
Leffler
Sep 6 12:47:04 sco FaxQueuer[14439]: Copyright (c) 1991-1996 Silicon
Graphics, Inc.
Sep 6 12:47:04 sco FaxGetty[14290]: HELLO
Sep 6 12:47:04 sco HylaFAX[14441]: HylaFAX INET Protocol Server:
restarted.
Sep 6 12:47:05 sco FaxGetty[14290]: QUIT
Sep 6 12:47:05 sco FaxGetty[14290]: CLOSE /dev/tty1A
Sep 6 12:47:05 sco FaxGetty[14290]: <-- [5:ATH0\r]
Sep 6 12:47:05 sco FaxGetty[14290]: --> [2:OK]
Sep 6 12:47:05 sco FaxGetty[14290]: MODEM set DTR OFF
Sep 6 12:47:05 sco FaxGetty[14290]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:47:06 sco FaxGetty[14457]: OPEN /dev/tty1A
Sep 6 12:47:06 sco FaxGetty[14457]: MODEM set DTR OFF
Sep 6 12:47:06 sco FaxGetty[14457]: MODEM set baud rate: 0 baud (flow
control unchanged)
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM set DTR ON
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM set baud rate: 38400 baud,
input flow RTS/CTS, output flow RTS/CTS
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM flush i/o
Sep 6 12:47:09 sco FaxGetty[14457]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Sep 6 12:47:09 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:09 sco FaxGetty[14457]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Sep 6 12:47:09 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:09 sco FaxGetty[14457]: <-- [12:AT+FCLASS=?\r]
Sep 6 12:47:09 sco FaxGetty[14457]: --> [11:0,2,2.0,6,8]
Sep 6 12:47:09 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM Supports "Data"
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM Supports "Class 2"
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM Supports "Class 2.0"
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM Supports
Sep 6 12:47:09 sco FaxGetty[14457]: MODEM Supports "Voice"
Sep 6 12:47:09 sco FaxGetty[14457]: <-- [14:AT+FCLASS=2.0\r]
Sep 6 12:47:09 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:09 sco FaxGetty[14457]: <-- [8:AT+FMI?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [5:ZyXEL]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM: Mfr ZyXEL
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [8:AT+FMM?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [18:U1496E V 6.21 P ]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [8:AT+FMR?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [18:U1496E V 6.21 P ]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM: Model U1496E
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM: Revision V 6.21 P
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 3.85 line/mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 7.7 line/mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 2400 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 4800 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 7200 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 9600 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 12000 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 14400 bit/s
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports page width 1728
pixels in 215 mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports page width 2048
pixels in 255 mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports page width 2432
pixels in 303 mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports page width 1216
pixels in 151 mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports page width 864
pixels in 107 mm
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports A4 page length (297
mm)
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports B4 page length (364
mm)
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports unlimited page
length
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 1-D MR
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 2-D MR
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 0 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 5 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 10 ms, 5 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 10 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 20 ms, 10
ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 20 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 40 ms, 20
ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 40 ms/scanline
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [9:AT+FCQ=?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [11:(0-2),(0-2)]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: MODEM Supports 1D+2D copy quality
checking (but not enabled)
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [9:AT+FAP=?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [5:ERROR]
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [9:AT+FSP=?\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [3:0,1]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [14:AT+FCLASS=2.0\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [9:AT+FLO=2\r]
Sep 6 12:47:10 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:10 sco FaxGetty[14457]: <-- [9:AT+FPP=0\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [9:AT+FBO=0\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [10:AT+FCT=30\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [9:AT+FIE=0\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: MODEM ZYXEL U1496E/V 6.21 P
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [5:ATM0\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [9:AT+FCR=1\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [25:AT+FLI=""\r]
Sep 6 12:47:11 sco FaxGetty[14457]: --> [2:OK]
Sep 6 12:47:11 sco FaxGetty[14457]: <-- [9:AT+FAA=1\r]
Sep 6 12:47:12 sco FaxGetty[14457]: --> [2:OK]
--
Jan Scheuer
________________________________________________________________________
Snake, spol. s r. o. email: jan.scheuer@snake.cz
Jungmannova 11 www: http://www.snake.cz/
LANSKROUN phone: +420 (467) 52 23 36
563 01
Czech Republic
