flexfax: WG: facsimile not received

["Bremer, Michael" <m.bremer@smf.de>]

Hi,

does anybody know why there is a failure??




> -----Urspr=FCngliche Nachricht-----
> Von:	The HylaFAX Receive Agent [SMTP:fax@smf-linux.smf.de]
> Gesendet am:	Donnerstag, 19. August 1999 09:19
> An:	FaxMaster@smf-linux.smf.de
> Betreff:	facsimile not received
>=20
>=20
>=20
>=20
>=20
> An attempt to receive facsimile on modem failed because:
>=20
>     T.30 T2 timeout, expected page not received
>=20
>     ---- Transcript of session follows ----
>=20
> Aug 19 09:18:08.45: [ 4043]: SESSION BEGIN 00003096 49231
> Aug 19 09:18:08.45: [ 4043]: <-- [4:ATA\r]
> Aug 19 09:18:14.63: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:14.63: [ 4043]: ANSWER: FAX CONNECTION
> Aug 19 09:18:14.63: [ 4043]: RECV FAX: begin
> Aug 19 09:18:15.73: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:16.91: [ 4043]: --> [2:OK]
> Aug 19 09:18:16.91: [ 4043]: <-- [9:AT+FRH=3D3\r]
> Aug 19 09:18:17.28: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:18.74: [ 4043]: --> [2:OK]
> Aug 19 09:18:18.74: [ 4043]: REMOTE TSI "+49 23 1=20
> Aug 19 09:18:18.74: [ 4043]: <-- [9:AT+FRH=3D3\r]
> Aug 19 09:18:18.76: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:19.12: [ 4043]: --> [2:OK]
> Aug 19 09:18:19.12: [ 4043]: REMOTE wants 14400 bit/s
> Aug 19 09:18:19.12: [ 4043]: REMOTE wants page width 1728 pixels in =
215 mm
> Aug 19 09:18:19.12: [ 4043]: REMOTE wants unlimited page length=20
> Aug 19 09:18:19.12: [ 4043]: REMOTE wants 7.7 line/mm
> Aug 19 09:18:19.12: [ 4043]: REMOTE wants 2-D MR
> Aug 19 09:18:19.12: [ 4043]: RECV training at v.17 14400 bit/s
> Aug 19 09:18:19.13: [ 4043]: <-- [11:AT+FRM=3D145\r]
> Aug 19 09:18:20.79: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:22.36: [ 4043]: RECV: TCF 2802 bytes, 1% non-zero, 2754
> zero-run
> Aug 19 09:18:22.36: [ 4043]: --> [10:NO CARRIER]
> Aug 19 09:18:22.36: [ 4043]: DELAY 75 ms
> Aug 19 09:18:22.45: [ 4043]: <-- [9:AT+FTH=3D3\r]
> Aug 19 09:18:22.49: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:23.96: [ 4043]: --> [2:OK]
> Aug 19 09:18:23.96: [ 4043]: TRAINING succeeded
> Aug 19 09:18:23.96: [ 4043]: <-- [11:AT+FRM=3D146\r]
> Aug 19 09:18:24.99: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:24.99: [ 4043]: RECV: begin page
> Aug 19 09:18:49.17: [ 4043]: RECV: 2317 total lines, 0 bad lines, 0
> consecutive bad lines
> Aug 19 09:18:49.18: [ 4043]: RECV: end page
> Aug 19 09:18:49.18: [ 4043]: --> [9:N CARRIER]
> Aug 19 09:18:51.18: [ 4043]: MODEM <Timeout>
> Aug 19 09:18:51.19: [ 4043]: RECV FAX (00003096): recvq/fax01536.tif =
from
> +49 231, route to <unspecified>, 0 pages in 0:37
> Aug 19 09:18:51.21: [ 4043]: RECV FAX: T.30 T2 timeout, expected page =
not
> received
> Aug 19 09:18:51.21: [ 4043]: <-- [9:AT+FTH=3D3\r]
> Aug 19 09:18:51.23: [ 4043]: --> [7:CONNECT]
> Aug 19 09:18:52.73: [ 4043]: --> [2:OK]
> Aug 19 09:18:52.75: [ 4043]: RECV FAX (00003096): session with +49
> 231terminated abnormally: T.30 T2 timeout, expected page not received
> Aug 19 09:18:52.76: [ 4043]: RECV FAX: bin/faxrcvd =
"recvq/fax01536.tif"
> "modem" "00003096" "T.30 T2 timeout, expected page not received"