flexfax: comrec error 72

[Wolfgang Scherer <wolfgang@aero-club.org>]

I am using SuSE 6.1 - Hylafax 4.0pl2 - MT2834ZDXI modem
(I found my problem in the mailing list archives but I was not able to
find any solution/help advice.)

On several received faxes I have a "comrec error 72". Can I do any
tuning to avoid?

Thanks for the help & best regards

Wolfgang

An attempt to receive facsimile on ttyS1 failed because:

    COMREC error

    ---- Transcript of session follows ----

Aug 10 20:53:56.72: [  350]: SESSION BEGIN 00000414 34952839484
Aug 10 20:53:56.72: [  350]: <-- [4:ATA\r]
Aug 10 20:54:06.20: [  350]: --> [5:+FCON]
Aug 10 20:54:06.20: [  350]: ANSWER: FAX CONNECTION
Aug 10 20:54:06.20: [  350]: MODEM input buffering enabled
Aug 10 20:54:06.20: [  350]: RECV FAX: begin
Aug 10 20:54:09.48: [  350]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
Aug 10 20:54:09.48: [  350]: REMOTE wants 9600 bit/s
Aug 10 20:54:09.48: [  350]: REMOTE wants page width 1728 pixels in 215
mm
Aug 10 20:54:09.48: [  350]: REMOTE wants unlimited page length 
Aug 10 20:54:09.48: [  350]: REMOTE wants 3.85 line/mm
Aug 10 20:54:09.48: [  350]: REMOTE wants 2-D MR
Aug 10 20:54:09.48: [  350]: --> [2:OK]
Aug 10 20:54:09.48: [  350]: <-- [7:AT+FDR\r]
Aug 10 20:54:10.91: [  350]: --> [5:+FCFR]
Aug 10 20:54:10.91: [  350]: --> [21:+FDCS:0,3,0,2,1,0,0,3]
Aug 10 20:54:10.91: [  350]: REMOTE wants 9600 bit/s
Aug 10 20:54:10.91: [  350]: REMOTE wants page width 1728 pixels in 215
mm
Aug 10 20:54:10.91: [  350]: REMOTE wants unlimited page length 
Aug 10 20:54:10.91: [  350]: REMOTE wants 3.85 line/mm
Aug 10 20:54:10.91: [  350]: REMOTE wants 2-D MR
Aug 10 20:54:11.48: [  350]: --> [7:CONNECT]
Aug 10 20:54:11.48: [  350]: RECV: begin page
Aug 10 20:54:11.48: [  350]: RECV: send trigger 022
Aug 10 20:54:24.25: [  350]: RECV: 14777 bytes of data, 446 total lines
Aug 10 20:54:24.25: [  350]: --> [15:+FPTS:2,0,0,0,0]
Aug 10 20:54:25.53: [  350]: --> [6:+FET:2]
Aug 10 20:54:25.53: [  350]: RECV recv EOP (no more pages or documents)
Aug 10 20:54:25.53: [  350]: --> [2:OK]
Aug 10 20:54:25.53: [  350]: RECV send RTN (retrain negative)
Aug 10 20:54:25.53: [  350]: <-- [7:AT+FDR\r]
Aug 10 20:54:28.65: [  350]: --> [8:+FHNG:72]
Aug 10 20:54:28.65: [  350]: REMOTE HANGUP: COMREC error (code 72)
Aug 10 20:54:28.65: [  350]: RECV FAX (00000414): recvq/fax00042.tif
from , route to <unspecified>, 0 pages in 0:22
Aug 10 20:54:28.65: [  350]: RECV FAX: COMREC error
Aug 10 20:54:28.65: [  350]: RECV FAX (00000414): session with 
terminated abnormally: COMREC error
Aug 10 20:54:28.65: [  350]: RECV FAX: bin/faxrcvd "recvq/fax00042.tif"
"ttyS1" "00000414" "COMREC error"