Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

faxq going down after send failed



Hi folks,

HylaFAX (tm) Version 4.0pl1
Solaris 2.4
2 Multitech MT1432 BG
1 Multitech ZDX 56k

my problem is the faxq-deamon just stops working after trying to send a
fax to
a destination without a fax:
syslog:
Jul 30 11:51:01 Zentra2 FaxSend[1920]: SEND FAX: JOB 53 DEST 07117880592
COMMID 00000078
Jul 30 11:52:15 Zentra2 FaxSend[1920]: SEND FAILED: Ring detect without
successful handshake

trying to kill the job gives:
460 Failed to kill job 53: Unable to open scheduler FIFO: No such device
or address.

ls -l /var/spool/fax gives
prw-------   1 uucp     uucp           0 Jul 30 11:54 FIFO
prw-------   1 uucp     uucp           0 Jul 27 13:09 FIFO.cua_0
prw-------   1 uucp     uucp           0 Jul 29 11:16 FIFO.cua_1
prw-------   1 uucp     uucp           0 Jul 28 13:29 FIFO.cua_6
(uucp and fax are identical on my system)

when trying to kill the job with faxrm syslog says:
Jul 30 11:53:20 Zentra2 FaxSend[1953]: CAUGHT SIGNAL 15

This looks very strange to me, when you ring a number that is "just
busy" the
Scheduler continues working.
Are the any configurable parameters for "error severeness"

nice weekend to all
/Matthias
-- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880599
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@hagos.de
Germany



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services