|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Problems receiving fax from some machines
>>>>> "DW" =3D=3D David Woolley <david@djwhome.demon.co.uk> writes:
[...]
DW> Get a better phone line or modem, or, as a last resort, force the
DW> maximum speed to 2400 for this caller.
Thanks for your hint, I don=B4t know how to force the maximum speed and=
tried the following command with success.
Class2DCCQueryCmd: "!(0,1),(0),(0-4),(0-2),(0),(0),(0),(0-7)"
This is the log:
Jul 28 00:20:45.05: [25948]: SESSION BEGIN 00000989 4953126362625
Jul 28 00:20:45.06: [25948]: <-- [4:ATA\r]
Jul 28 00:21:01.85: [25948]: --> [5:+FCON]
Jul 28 00:21:02.01: [25948]: ANSWER: FAX CONNECTION
Jul 28 00:21:02.05: [25948]: RECV FAX: begin
Jul 28 00:21:03.96: [25948]: --> [29:+FTSI: " D2-ISY-Fax"]
Jul 28 00:21:03.96: [25948]: REMOTE TSI "D2-ISY-Fax"
Jul 28 00:21:03.96: [25948]: --> [22:+FDCS: 1,3,0,2,0,0,0,5]
Jul 28 00:21:03.99: [25948]: REMOTE wants 9600 bit/s
Jul 28 00:21:03.99: [25948]: REMOTE wants page width 1728 pixels in 215=
mm
Jul 28 00:21:03.99: [25948]: REMOTE wants unlimited page length=20
Jul 28 00:21:04.00: [25948]: REMOTE wants 7.7 line/mm
Jul 28 00:21:04.00: [25948]: REMOTE wants 1-D MR
Jul 28 00:21:05.81: [25948]: --> [2:OK]
Jul 28 00:21:05.81: [25948]: <-- [7:AT+FDR\r]
Jul 28 00:21:07.27: [25948]: --> [5:+FCFR]
Jul 28 00:21:07.27: [25948]: --> [29:+FTSI: " D2-ISY-Fax"]
Jul 28 00:21:07.27: [25948]: REMOTE TSI "D2-ISY-Fax"
Jul 28 00:21:07.28: [25948]: --> [22:+FDCS: 1,3,0,2,0,0,0,5]
Jul 28 00:21:07.28: [25948]: REMOTE wants 9600 bit/s
Jul 28 00:21:07.29: [25948]: REMOTE wants page width 1728 pixels in 215=
mm
Jul 28 00:21:07.29: [25948]: REMOTE wants unlimited page length=20
Jul 28 00:21:07.29: [25948]: REMOTE wants 7.7 line/mm
Jul 28 00:21:07.29: [25948]: REMOTE wants 1-D MR
Jul 28 00:21:08.13: [25948]: --> [1:=FF]
Jul 28 00:21:08.13: [25948]: --> [7:CONNECT]
Jul 28 00:21:08.13: [25948]: RECV: begin page
Jul 28 00:21:08.15: [25948]: RECV: send trigger 022
Jul 28 00:21:08.15: [25948]: <-- data [1]
Jul 28 00:22:22.25: [25948]: RECV: 2343 total lines, 0 bad lines, 0 con=
secutive bad lines
Jul 28 00:22:22.30: [25948]: --> [8:+FPTS: 1]
Jul 28 00:22:23.80: [25948]: --> [7:+FET: 0]
Jul 28 00:22:23.80: [25948]: RECV recv MPS (more pages, same document)
Jul 28 00:22:23.80: [25948]: --> [2:OK]
Jul 28 00:22:23.97: [25948]: RECV send MCF (message confirmation)
Jul 28 00:22:24.02: [25948]: RECV FAX (00000989): from D2-ISY-Fax, page=
1 in 1:18, INF, 7.7 line/mm, 1-D MR
Jul 28 00:22:24.03: [25948]: <-- [7:AT+FDR\r]
Jul 28 00:22:26.53: [25948]: --> [1:=FF]
Jul 28 00:22:26.53: [25948]: --> [7:CONNECT]
Jul 28 00:22:26.53: [25948]: RECV: begin page
Jul 28 00:22:26.54: [25948]: RECV: send trigger 022
Jul 28 00:22:26.55: [25948]: <-- data [1]
Jul 28 00:23:19.94: [25948]: RECV: 2343 total lines, 0 bad lines, 0 con=
secutive bad lines
Jul 28 00:23:19.96: [25948]: --> [8:+FPTS: 1]
Jul 28 00:23:21.41: [25948]: --> [7:+FET: 2]
Jul 28 00:23:21.41: [25948]: RECV recv EOP (no more pages or documents)=
Jul 28 00:23:21.41: [25948]: --> [2:OK]
Jul 28 00:23:21.48: [25948]: RECV send MCF (message confirmation)
Jul 28 00:23:21.49: [25948]: RECV FAX (00000989): from D2-ISY-Fax, page=
2 in 0:57, INF, 7.7 line/mm, 1-D MR
Jul 28 00:23:21.55: [25948]: RECV FAX (00000989): recvq/fax00327.tif fr=
om D2-ISY-Fax, route to <unspecified>, 2 pages in 2:19
Jul 28 00:23:21.68: [25948]: <-- [7:AT+FDR\r]
Jul 28 00:23:24.78: [25948]: --> [9:+FHNG: 00]
Jul 28 00:23:24.78: [25948]: REMOTE HANGUP: Normal and proper end of co=
nnection (code 0)
Jul 28 00:23:24.82: [25948]: RECV FAX: bin/faxrcvd "recvq/fax00327.tif"=
"ttyS0" "00000989" ""
Jul 28 00:23:40.73: [25948]: RECV FAX: end
Jul 28 00:23:40.85: [25948]: SESSION END
Thanks again
Bodo
--=20
#######################################################################=
# Bodo Bock #=
# E-Mail: B.Bock@tu-bs.de #=
# Fax:=09(05 31) 3 49 76 62 =
#
#######################################################################=
