Re: flexfax: faxgetty configureation

[Nico Kadel-Garcia <raoul@cirl.meei.harvard.edu>]

-----BEGIN PGP SIGNED MESSAGE-----

On Mon, 19 Jul 1999, Michael [iso-8859-1] M=F6ller wrote:

> Hi !
>=20
> I`ve got a little problem with faxgetty. I want to use
> Hylafax for outbound fax only on the one side, but use faxgetty
> on the other side. The Problem is, the incoming calls should
> be hand over to an applikation called "lss". lss should be
> started after the modem answered the call and needs no parameter.
> I tried to substitute getty with lss and configure faxgetty to
> assume every call is a data call. It`s not working because
> lss needs the serialport to be at 2400 bps, otherwise it
> terminates.=20

> The Speeed between the caller and the modem is 2400 bps -
> automatic by modem-handshake, but the speed between modem
> an PC is higher (i.e. 38400) When I reduce the port-speed
> with setserial the outbound fax would be send with 2400 bps
> too - and i dont like that. So:

Rewrite lss to take faster speeds? Hard-code in the config file the
data speed via the ModemAnswerCmd, setting it to 2400 baud?

=09=09=09Nico Kadel-Garcia
=09=09=09Senior Engineer, CIRL=20
=09=09=09Mass. Eye and Ear Infirmary
=09=09=09raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBN5SSUz/+ItycgIJRAQH0twP9EtBBGrX0/qKN2Vj4TD1t3KR+ot6iDByB
wejBhAa5erJb5KVQzUMEGWu2l40MvlYaNASNNl9vQWK8IVIjpa4hr72ytot53FUl
pewto9DzKs/r/1TQmYd2EUb0656OBXqopx8fzaXJTugApxff6j6F58L+l3edmT+i
v+nQdK5pzpc=3D
=3Dmwiw
-----END PGP SIGNATURE-----