Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Setting up a Telebit 3000



>
> There seems to be a little problem with the modem setup for the Telebit
> 3000/Worldblazer modem. I was getting timeout messages with every transmit
> operation (using hylafax-v4.0pl2)
>
> The problem seems to be the use of the DTR &D command to reset the modem
> on dropped DTR. It defaulted to &D3 which reloads the configuration
> profile specified by S255. I changed it to &D2 which does the reset but
> leaves the configuration alone. If you don't change anything in the
> default setup, it may at least be worth a note in the docs.
>
> Please reply directly, I don't subscribe to the list.
>
> Thanks
>  --Louis
>

We're also using HylaFAX-v4.0pl2 with the 3000/WorldBlazer modem.  The
default settings work just fine on my HP-UX and Linux (Intel) systems.

Regards,
Bob



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services