Re: flexfax: WHFC under NT Terminal Server

["Steven Cruysberghs" <broux-werken@skynet.be>]

Sounds familiar.

The odd thing I would like to add is that our configuration worked just fine
before installing service pack 4. But now I'm getting the WHFC.EXE - DLL
Initialization Failed aswell. My (ugly) workaround for this is to put
WHFC.exe in startup map for all users.

A better solution would be welcome.

Steven

-----Oorspronkelijk bericht-----
Van: Carl Patten <cpatte@trimodalinc.com>
Aan: flexfax@sgi.com <flexfax@sgi.com>
Datum: vrijdag 18 juni 1999 7:31
Onderwerp: flexfax: WHFC under NT Terminal Server


>
>My desire is to make WHFC 1.0.5 work under Windows NT Terminal Server 4.0
>(service pack 4) with Citrix MetaFrame 1.8.  Needless to say, this is a bit
>tricky, but I'm so close it hurts.
>
>What I did: installed WHFC as administrator.  Set up printer named
"HylaFAX"
>using print driver Apple LaserWriter 16/600 PS, connected to port
>"WHFCFAX:".
>
>Here's how it's behaving:  if WHFC is already running, I can print to the
>HylaFAX printer and the WHFC send fax dialog windows comes up normally.  If
>WHFC is not running I get no send fax dialog; instead I get the following
>error on the console:
>
>WHFC.EXE - DLL Initialization Failed
>Initialization of the dynamic link library M:\WTSRV\system32\KERNEL32.dll
>failed.  The process is terminating abnormally.
>
>This is followed by a blank Error dialog box on the console with OK and
>Cancel as options.  The HylaFax printer status shows it's deleting the job,
>but hangs until I click OK or Cancel at the console.
>
>Incidentally, I checked permissions on kernel32.dll; "everybody" has "read"
>access.