Re: flexfax: FIFO: Device not configured.

[Eric Smith <info@fruitcom.com>]

Nope tried all that - going for full reinstall from the tar distribution,

Have been getting this ..
mmm, this looks like a Class 1 modem.
/bin/stty: standard input: unable to perform all requested operations
Product code (ATI0) is "5601".
/bin/stty: standard input: unable to perform all requested operations
never had this before.

:( oh dear

And it was said by  Andrew DePaula on Tue, Apr 13, 1999 at 01:34:28PM -0800:
: faxq should be located in /usr/local/sbin ( at lest it is on my system)
: you'll need to make sure that directory is in your path, or go there before
: trying to run it. also do a man faxq to be sure you are calling it with the 
: right options.
: 
: -AD
: 
: >>> Eric Smith <info@fruitcom.com> 04/13 1:06 PM >>>
: And it was said by  darren@info.tpc.int on Tue, Apr 13, 1999 at 05:01:28PM +0100:
: : In message <19990413161459.E12199@fruitcom.com>, Eric Smith writes:
: : >
: : >All was well in the Land, I have been using Hylafax for almost two years.
: : >Then on sendfax, I got this ...
: : >460 Failed to submit job 234: Unable to open scheduler FIFO: Device not
: : >configured.
: : 
: : Looks like faxq was not running. Solution: run it.
: : 
: 
: Thanx
: 
: [root@plum /root]# /usr/sbin/faxq
: never had to do that before to get going ... anyway
: [root@plum /root]#  sendfax -R -n -d 15124512 /tmp/e
: 460 Failed to submit job 5: Unable to open scheduler FIFO: Device not
: configured.
: 
: ... tried to run
: [root@plum /root]# faxq
: /usr/bin/faxq: /var/spool/fax/outgoing: No such file or directory
: cannot chdir to /var/spool/fax/outgoing...
: 
: Any more suggestions?
: 

-- 
Eric Smith
<eric@fruitcom.com> 
Tel. 021 236 111