Only first page sent, but 3 times

To: <flexfax@sgi.com>
Subject: flexfax: Only first page sent, but 3 times
From: "Horst Simon" <hsimon@vic.bigpond.net.au>
Reply-To: <hsimon@vic.bigpond.net.au>
Date: Tue, 23 Mar 1999 12:19:24 +1100
I have HylaFAX v4.0pl2 binary distribution on RedHat 5.2 and using a Hayes
Optima 336.
I tested outgoing and incoming faxes and all worked ok, all this test were
carried out to
othe faxmodems or faxboards.
I sent a fax to a fax machine for the first time and the transmission
failed, it transmitted only
the first page and 3 times. I looked at the log file and can see there is a
difference betweeen the
good transmission and the failed, but unfortunately I do not understand what
all this means and how to
correct it.

Following is the trace and any information/suggestions is aoppreciated.

Thanks and Regards,
Horst Simon

===============================
|   Horst Simon               |
|   9 Stonehaven Crescent     |
|   Moorabbin, Vic, 3189      |
|   Australia                 |
|   hsimon@vic.bigpond.net.au |
===============================
Mar 23 11:00:26.74: [ 1127]: SESSION BEGIN 00000006 6103149900113284316504
Mar 23 11:00:26.75: [ 1127]: SEND FAX: JOB 4 DEST 1499 0011 32 84 316504
COMMID 00000006
Mar 23 11:00:26.75: [ 1127]: DELAY 2600 ms
Mar 23 11:00:29.35: [ 1127]: <-- [15:ATE0V1Q0S0=0H0\r]
Mar 23 11:00:29.40: [ 1127]: --> [2:OK]
Mar 23 11:00:29.40: [ 1127]: <-- [12:ATS8=2S7=60\r]
Mar 23 11:00:29.46: [ 1127]: --> [2:OK]
Mar 23 11:00:29.46: [ 1127]: <-- [12:AT+FCLASS=2\r]
Mar 23 11:00:29.50: [ 1127]: --> [2:OK]
Mar 23 11:00:29.50: [ 1127]: <-- [10:AT+FTBC=0\r]
Mar 23 11:00:29.55: [ 1127]: --> [2:OK]
Mar 23 11:00:29.55: [ 1127]: <-- [10:AT+FBOR=0\r]
Mar 23 11:00:29.60: [ 1127]: --> [2:OK]
Mar 23 11:00:29.60: [ 1127]: <-- [13:AT+FPHCTO=30\r]
Mar 23 11:00:29.65: [ 1127]: --> [2:OK]
Mar 23 11:00:29.65: [ 1127]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Mar 23 11:00:29.70: [ 1127]: --> [2:OK]
Mar 23 11:00:29.70: [ 1127]: <-- [7:ATL1M1\r]
Mar 23 11:00:29.74: [ 1127]: --> [2:OK]
Mar 23 11:00:29.74: [ 1127]: <-- [12:AT+FCLASS=2\r]
Mar 23 11:00:29.89: [ 1127]: --> [2:OK]
Mar 23 11:00:29.89: [ 1127]: <-- [10:AT+FTBC=0\r]
Mar 23 11:00:30.03: [ 1127]: --> [2:OK]
Mar 23 11:00:30.03: [ 1127]: <-- [10:AT+FBOR=0\r]
Mar 23 11:00:30.17: [ 1127]: --> [2:OK]
Mar 23 11:00:30.17: [ 1127]: <-- [13:AT+FPHCTO=30\r]
Mar 23 11:00:30.31: [ 1127]: --> [2:OK]
Mar 23 11:00:30.31: [ 1127]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Mar 23 11:00:30.46: [ 1127]: --> [2:OK]
Mar 23 11:00:30.46: [ 1127]: <-- [29:AT+FLID="+61-(0)3-9553 1624"\r]
Mar 23 11:00:30.61: [ 1127]: --> [2:OK]
Mar 23 11:00:30.65: [ 1127]: DIAL 149900113284316504
Mar 23 11:00:30.65: [ 1127]: <-- [23:ATDT149900113284316504\r]
Mar 23 11:01:05.20: [ 1127]: --> [5:+FCON]
Mar 23 11:01:07.52: [ 1127]: --> [153:+FNSF:00 00 11 80 00 8A 49 10 4C
45 43 52 4F 4D 42 53 20 57 41 49 4C 4C 45 54 00 46 00 86 04 30 30 30 30
80 C0 8F 02 01 00 01 01 01 01 04 45 36 FF FF FF ]
Mar 23 11:01:07.52: [ 1127]: REMOTE NSF "00 00 11 80 00 8A 49 10 4C 45
43 52 4F 4D 42 53 20 57 41 49 4C 4C 45 54 00 46 00 86 04 30 30 30 30
80 C0 8F 02 01 00 01 01 01 01 04 45 36 FF FF FF"
Mar 23 11:01:08.14: [ 1127]: --> [28:+FCSI:"       +32 84 316504"]
Mar 23 11:01:08.14: [ 1127]: REMOTE CSI "+32 84 316504"
Mar 23 11:01:08.41: [ 1127]: --> [21:+FDIS:1,3,0,2,1,2,0,3]
Mar 23 11:01:08.41: [ 1127]: --> [2:OK]
Mar 23 11:01:08.41: [ 1127]: REMOTE best rate 9600 bit/s
Mar 23 11:01:08.41: [ 1127]: REMOTE max page width 1728 pixels in 215 mm
Mar 23 11:01:08.41: [ 1127]: REMOTE max unlimited page length
Mar 23 11:01:08.41: [ 1127]: REMOTE best vres 7.7 line/mm
Mar 23 11:01:08.41: [ 1127]: REMOTE best format 2-D MR
Mar 23 11:01:08.41: [ 1127]: REMOTE supports T.30 Annex C, half duplex ECM
Mar 23 11:01:08.41: [ 1127]: REMOTE best 10 ms/scanline
Mar 23 11:01:08.41: [ 1127]: USE 9600 bit/s
Mar 23 11:01:08.41: [ 1127]: USE 10 ms/scanline
Mar 23 11:01:08.41: [ 1127]: SEND file "docq/doc7.ps;00"
Mar 23 11:01:08.42: [ 1127]: USE page width 1728 pixels in 215 mm
Mar 23 11:01:08.42: [ 1127]: USE unlimited page length
Mar 23 11:01:08.42: [ 1127]: USE 3.85 line/mm
Mar 23 11:01:08.42: [ 1127]: USE 1-D MR
Mar 23 11:01:08.42: [ 1127]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,3\r]
Mar 23 11:01:08.57: [ 1127]: --> [2:OK]
Mar 23 11:01:08.57: [ 1127]: <-- [7:AT+FDT\r]
Mar 23 11:01:16.02: [ 1127]: --> [21:+FDCS:0,3,0,2,0,0,0,3]
Mar 23 11:01:16.02: [ 1127]: --> [7:CONNECT]
Mar 23 11:01:16.02: [ 1127]: SEND wait for XON
Mar 23 11:01:16.02: [ 1127]: --> [1:]
Mar 23 11:01:16.02: [ 1127]: SEND begin page
Mar 23 11:01:16.03: [ 1127]: <-- data [1026]
Mar 23 11:01:16.03: [ 1127]: <-- data [1025]
Mar 23 11:01:16.03: [ 1127]: <-- data [1024]
Mar 23 11:01:16.03: [ 1127]: <-- data [1025]
Mar 23 11:01:16.03: [ 1127]: <-- data [1025]
Mar 23 11:01:17.46: [ 1127]: <-- data [1025]
Mar 23 11:01:18.95: [ 1127]: <-- data [1026]
Mar 23 11:01:19.87: [ 1127]: <-- data [1028]
Mar 23 11:01:20.80: [ 1127]: <-- data [1025]
Mar 23 11:01:22.01: [ 1127]: <-- data [1024]
Mar 23 11:01:22.66: [ 1127]: <-- data [1027]
Mar 23 11:01:24.65: [ 1127]: <-- data [1028]
Mar 23 11:01:25.30: [ 1127]: <-- data [1027]
Mar 23 11:01:26.85: [ 1127]: <-- data [1026]
Mar 23 11:01:27.73: [ 1127]: <-- data [1024]
Mar 23 11:01:28.64: [ 1127]: <-- data [459]
Mar 23 11:01:28.64: [ 1127]: SENT 15819 bytes of data
Mar 23 11:01:28.64: [ 1127]: <-- data [2]
Mar 23 11:01:34.55: [ 1127]: SEND end page
Mar 23 11:01:35.21: [ 1127]: --> [2:OK]
Mar 23 11:01:35.21: [ 1127]: SEND send MPS (more pages, same document)
Mar 23 11:01:35.21: [ 1127]: <-- [9:AT+FET=0\r]
Mar 23 11:01:40.36: [ 1127]: --> [7:+FPTS:2]
Mar 23 11:01:40.36: [ 1127]: --> [2:OK]
Mar 23 11:01:40.36: [ 1127]: SEND recv RTN (retrain negative)
Mar 23 11:01:40.36: [ 1127]: <-- [7:AT+FDT\r]
Mar 23 11:01:47.84: [ 1127]: --> [7:CONNECT]
Mar 23 11:01:47.84: [ 1127]: SEND wait for XON
Mar 23 11:01:47.84: [ 1127]: --> [1:]
Mar 23 11:01:47.84: [ 1127]: SEND begin page
Mar 23 11:01:47.85: [ 1127]: <-- data [1026]
Mar 23 11:01:47.85: [ 1127]: <-- data [1025]
Mar 23 11:01:47.85: [ 1127]: <-- data [1024]
Mar 23 11:01:47.85: [ 1127]: <-- data [1025]
Mar 23 11:01:47.85: [ 1127]: <-- data [1025]
Mar 23 11:01:49.19: [ 1127]: <-- data [1025]
Mar 23 11:01:50.57: [ 1127]: <-- data [1026]
Mar 23 11:01:51.50: [ 1127]: <-- data [1028]
Mar 23 11:01:52.43: [ 1127]: <-- data [1025]
Mar 23 11:01:53.49: [ 1127]: <-- data [1024]
Mar 23 11:01:54.75: [ 1127]: <-- data [1027]
Mar 23 11:01:55.99: [ 1127]: <-- data [1028]
Mar 23 11:01:57.36: [ 1127]: <-- data [1027]
Mar 23 11:01:58.14: [ 1127]: <-- data [1026]
Mar 23 11:01:58.92: [ 1127]: <-- data [1024]
Mar 23 11:01:59.83: [ 1127]: <-- data [459]
Mar 23 11:02:00.75: [ 1127]: SENT 15819 bytes of data
Mar 23 11:02:00.75: [ 1127]: <-- data [2]
Mar 23 11:02:06.53: [ 1127]: SEND end page
Mar 23 11:02:07.04: [ 1127]: --> [2:OK]
Mar 23 11:02:07.04: [ 1127]: SEND send MPS (more pages, same document)
Mar 23 11:02:07.04: [ 1127]: <-- [9:AT+FET=0\r]
Mar 23 11:02:12.20: [ 1127]: --> [7:+FPTS:2]
Mar 23 11:02:12.20: [ 1127]: --> [2:OK]
Mar 23 11:02:12.20: [ 1127]: SEND recv RTN (retrain negative)
Mar 23 11:02:12.20: [ 1127]: <-- [7:AT+FDT\r]
Mar 23 11:02:19.70: [ 1127]: --> [7:CONNECT]
Mar 23 11:02:19.70: [ 1127]: SEND wait for XON
Mar 23 11:02:19.70: [ 1127]: --> [1:]
Mar 23 11:02:19.70: [ 1127]: SEND begin page
Mar 23 11:02:19.71: [ 1127]: <-- data [1026]
Mar 23 11:02:19.71: [ 1127]: <-- data [1025]
Mar 23 11:02:19.71: [ 1127]: <-- data [1024]
Mar 23 11:02:19.71: [ 1127]: <-- data [1025]
Mar 23 11:02:19.71: [ 1127]: <-- data [1025]
Mar 23 11:02:21.05: [ 1127]: <-- data [1025]
Mar 23 11:02:22.43: [ 1127]: <-- data [1026]
Mar 23 11:02:23.36: [ 1127]: <-- data [1028]
Mar 23 11:02:24.29: [ 1127]: <-- data [1025]
Mar 23 11:02:25.35: [ 1127]: <-- data [1024]
Mar 23 11:02:26.61: [ 1127]: <-- data [1027]
Mar 23 11:02:27.85: [ 1127]: <-- data [1028]
Mar 23 11:02:29.24: [ 1127]: <-- data [1027]
Mar 23 11:02:30.03: [ 1127]: <-- data [1026]
Mar 23 11:02:30.82: [ 1127]: <-- data [1024]
Mar 23 11:02:31.73: [ 1127]: <-- data [459]
Mar 23 11:02:32.65: [ 1127]: SENT 15819 bytes of data
Mar 23 11:02:32.65: [ 1127]: <-- data [2]
Mar 23 11:02:38.42: [ 1127]: SEND end page
Mar 23 11:02:38.90: [ 1127]: --> [2:OK]
Mar 23 11:02:38.90: [ 1127]: SEND send MPS (more pages, same document)
Mar 23 11:02:38.90: [ 1127]: <-- [9:AT+FET=0\r]
Mar 23 11:03:10.52: [ 1127]: --> [8:+FHNG:54]
Mar 23 11:03:10.52: [ 1127]: REMOTE HANGUP: No response to EOP repeated 3
times (code 54)
Mar 23 11:03:10.52: [ 1127]: <-- [5:ATH0\r]
Mar 23 11:03:11.13: [ 1127]: --> [2:OK]
Mar 23 11:03:11.13: [ 1127]: SESSION END
Follow-Ups:
- Re: Only first page sent, but 3 times
  - From: Hong Kong Observatory <d1swdev@asiaonline.net>
Prev by Date: Re: FW: Whose looking after Hylafax?
Next by Date: Re: FW: FW: Old modem list
Prev by thread: Re: Old modem list
Next by thread: Re: Only first page sent, but 3 times
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services