Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem with 2D-MR!




Hi and Hello,

I have a misterious problem:

My Modem only accepts 1D-MR encoded multiple page faxes. Everytime I get
a 2-D-MR encoded multiple-page fax my modem hangs up.
And everytime I get a 2D-MR encoded page the sender gets an error
message.
So sometimes I have gotten 10 faxes a day, but the faxes where identical
:-(!
Is the problem known (I realy hope so), and can anybody help me?

Sry, but I donīt know the HylaFAX-Version I am working with. If somebody
knows: It is from the SuSE 6.0 Linux distribution (Kernel 2.2.2)

My Modem (33.600):
--------------------------------
ATI3
CRP-02 GER 950422

ATI4
a007880284C6002F
bC60000000
r1005111151012004
r3000111170000000

ATI6
RC288DPi Rev 05BA
-------------------------------

The LOG:
-------------------------------
Mar 22 13:10:32.18: [  251]: SESSION BEGIN 00000247 4955164504
Mar 22 13:10:32.18: [  251]: <-- [4:ATA\r]
Mar 22 13:10:40.30: [  251]: --> [5:+FCON]
Mar 22 13:10:40.30: [  251]: MODEM set baud rate: 19200 baud (flow
control uncha
nged)
Mar 22 13:10:40.30: [  251]: MODEM set baud rate: 19200 baud, input flow
XON/XOF
F, output flow XON/XOFF
Mar 22 13:10:40.30: [  251]: ANSWER: FAX CONNECTION
Mar 22 13:10:40.30: [  251]: MODEM input buffering enabled
Mar 22 13:10:40.30: [  251]: RECV FAX: begin
Mar 22 13:10:41.91: [  251]: --> [29:+FTSI: "     +49 551 4004953"]
Mar 22 13:10:41.91: [  251]: REMOTE TSI "+49 551 4004953"
Mar 22 13:10:42.29: [  251]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 22 13:10:42.29: [  251]: REMOTE wants 14400 bit/s
Mar 22 13:10:42.29: [  251]: REMOTE wants page width 1728 pixels in 215
mm
Mar 22 13:10:42.29: [  251]: REMOTE wants unlimited page length 
Mar 22 13:10:42.29: [  251]: REMOTE wants 3.85 line/mm
Mar 22 13:10:42.29: [  251]: REMOTE wants 2-D MR
Mar 22 13:10:42.29: [  251]: --> [2:OK]
Mar 22 13:10:42.29: [  251]: <-- [7:AT+FDR\r]
Mar 22 13:10:45.24: [  251]: --> [5:+FCFR]
Mar 22 13:10:47.35: [  251]: --> [22:+FDCS: 0,5,0,2,1,0,0,1]
Mar 22 13:10:47.35: [  251]: REMOTE wants 14400 bit/s
Mar 22 13:10:47.35: [  251]: REMOTE wants page width 1728 pixels in 215
mm
Mar 22 13:10:47.35: [  251]: REMOTE wants unlimited page length 
Mar 22 13:10:47.35: [  251]: REMOTE wants 3.85 line/mm
Mar 22 13:10:47.35: [  251]: REMOTE wants 2-D MR
Mar 22 13:10:47.35: [  251]: --> [7:CONNECT]
Mar 22 13:10:47.35: [  251]: RECV: begin page
Mar 22 13:10:47.35: [  251]: MODEM set XON/XOFF/FLUSH: input ignored,
output gen
erated
Mar 22 13:10:47.35: [  251]: RECV: send trigger 022
Mar 22 13:10:47.35: [  251]: <-- data [1]
Mar 22 13:10:56.19: [  251]: RECV: 810 total lines, 0 bad lines, 0
consecutive b
ad lines
Mar 22 13:10:56.19: [  251]: MODEM set XON/XOFF/DRAIN: input
interpreted, output
 disabled
Mar 22 13:10:56.19: [  251]: --> [17:+FPTS: 2,2219,0,0]
Mar 22 13:10:57.53: [  251]: --> [7:+FET: 2]
Mar 22 13:10:57.53: [  251]: RECV recv EOP (no more pages or documents)
Mar 22 13:10:57.53: [  251]: --> [2:OK]
Mar 22 13:10:57.53: [  251]: RECV send MCF (message confirmation)
Mar 22 13:10:57.53: [  251]: RECV FAX (00000247): from +49 551 4004953,
page 1 i
n 0:15, INF, 3.85 line/mm, 2-D MR
Mar 22 13:10:57.53: [  251]: RECV FAX (00000247): recvq/fax00162.tif
from +49 55
1 4004953, route to <unspecified>, 1 pages in 0:17
Mar 22 13:10:57.53: [  251]: <-- [7:AT+FDR\r]
Mar 22 13:11:00.89: [  251]: --> [29:+FTSI: "     +49 551 4004953"]
Mar 22 13:11:00.89: [  251]: RECV FAX: bin/faxrcvd "recvq/fax00162.tif"
"modem" 
"00000247" ""
Mar 22 13:11:01.05: [  251]: RECV FAX: end
Mar 22 13:11:01.05: [  251]: SESSION END
--------------------------------------------------------



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services