Re: flexfax: look at this log... what does it mean?

[Matt Kaminer <matt@kaminer.com>]

Robert:

I have 4.0 pl 2  --my apology

When I said I could not view the tiff file, i meant that although the hylafax
says ---

Mar 08 01:14:32.51: [  484]: RECV FAX (00000009): recvq/fax00003.tif from
7035286174, route to <unspecified>, 0 pages in 0:30

there is no fax00003.tif in that directory.

So basically hylafax seems to receive the fax (when a sender from a fax machine
sends, it seems to finish without error) but there is no file stored on the
server and i get the error ---

Mar 08 01:14:28.02: [  484]: RECV: 791 total lines, 789 bad lines, 452
consecutive bad lines
Mar 08 01:14:28.07: [  484]: --> [17:+FPS:1,2260,0,0,0]
Mar 08 01:14:29.32: [  484]: --> [6:+FET:2]
Mar 08 01:14:29.32: [  484]: RECV recv EOP (no more pages or documents)
Mar 08 01:14:29.32: [  484]: --> [2:OK]
Mar 08 01:14:29.33: [  484]: RECV: REJECT page quality, 0% good lines (95%
required)


Where sould i begin to figure this problem out?

regards,

matt


robert a schmied wrote:

> matt
>
> hylafax 4.0 is rather old, can you attempt an upgrade?
>
> what are you trying to show here (e.g. what is the meaning of
> "the  th TIF file is non exisitent.")?
>
> trouble with local client server or trouble sending from
> a fax machine to faxmodem controlled by hylafax or something
> else?
>



>
> ras
>
> Matt Kaminer wrote:
> >
> > running Hylafax 4.0 on a redhat 5.0 server
> >
> > the fax seems to go through ok on the sender side.  this is what i gt on
> > the hylafax side.  (BTW, the  th TIF file is non exisitent.)
> >
> > RECV: begin page
> > Mar 08 01:14:09.21: [  484]: RECV: send trigger 022
> > Mar 08 01:14:28.02: [  484]: RECV: 791 total lines, 789 bad lines, 452
> > consecutive bad lines
> > Mar 08 01:14:28.07: [  484]: --> [17:+FPS:1,2260,0,0,0]
> > Mar 08 01:14:29.32: [  484]: --> [6:+FET:2]
> > Mar 08 01:14:29.32: [  484]: RECV recv EOP (no more pages or documents)
> > Mar 08 01:14:29.32: [  484]: --> [2:OK]
> > Mar 08 01:14:29.33: [  484]: RECV: REJECT page quality, 0% good lines (95%
> > required)
> > Mar 08 01:14:29.33: [  484]: RECV send RTN (retrain negative)
> > Mar 08 01:14:29.33: [  484]: <-- [9:AT+FPS=2\r]
> > Mar 08 01:14:29.57: [  484]: --> [2:OK]
> > Mar 08 01:14:29.57: [  484]: <-- [7:AT+FDR\r]
> > Mar 08 01:14:32.47: [  484]: --> [7:+FHS:00]
> > Mar 08 01:14:32.47: [  484]: REMOTE HANGUP: Normal and proper end of
> > connection
> > (code 0)