ZYXEL /U1496EG V 6.19 M Hardware Problem ??

To: flexfax@sgi.com
Subject: flexfax: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
From: Bernd Broermann <info@broermann.com>
Date: Fri, 5 Mar 1999 23:49:54 +0100

Hi,

I want to run Hylafax 4.0pl2 From SuSE Distribution Kernel 2.0.36 SMP machine.

I decide to use the  ZYXEL Modem( U1496EG V 6.19 ) in the supported List.
I installed it, disabled ECM and run it with  class2.0 and later for class1 . 
There are is a funny behavior when i send a multi page fax:  
some pages are sent multiple times, but there is no reguarity. 
The doneq stats for example 2 of 2 pages , but the second is double.
When sending a second time the fax is ok. 

Some faxes are aborted with errors shown below.  
  

Can you help me because I am going to buy another modem
and I dont know if its the right way.


Regards,
cu bernd 

--
Broermann Technologie Beratung
http://www.opensource.de
<< Open Source for your business >>


------------------------------------------------------------------------------

class2.0 errors brief:
No response to MPS repeated 3  or 
Failure to train at 2400                  or 

Mar 02 16:41:43.71: [18911]: SEND begin page
Mar 02 16:41:48.17: [18911]: SENT 13925 bytes of data
Mar 02 16:41:48.17: [18911]: SEND 1D RTC
Mar 02 16:41:48.17: [18911]: SEND end page
Mar 02 16:41:48.17: [18911]: SEND send MPS (more pages, same document)
Mar 02 16:42:02.59: [18911]: --> [5:ERROR]
Mar 02 16:42:02.60: [18911]: SEND recv RTN (retrain negative)
Mar 02 16:42:02.60: [18911]: <-- [7:AT+FKS\r]
Mar 02 16:42:04.08: [18911]: --> [7:+FHS:02]
Mar 02 16:42:04.08: [18911]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (co
de 2)
Mar 02 16:42:04.08: [18911]: --> [5:ERROR] 

---------------------------------------------------------------------------------------
class1 error MULTIPLE PAGE detailed :
Mar  4 16:56:45 linux-2.0.36 HylaFAX[3698]: Filesystem has SysV-style file creation semantics.
Mar  4 16:56:45 linux-2.0.36 FaxQueuer[25579]: SUBMIT JOB 187
Mar  4 16:56:45 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:59:00): PREPARE START
Mar  4 16:56:45 linux-2.0.36 FaxQueuer[3703]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o docq/doc199.ps;40 -r 98 -w 1728 -l 297 -m 30 -2 docq/doc199.ps.187
Mar  4 16:56:47 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:58:58): PREPARE DONE
Mar  4 16:56:47 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:58:58): CMD START /usr/lib/fax/faxsend -m modem sendq/q187 (PID 3712)
Mar  4 16:56:47 linux-2.0.36 FaxSend[3712]: MODEM set DTR OFF
Mar  4 16:56:47 linux-2.0.36 FaxSend[3712]: DELAY 2600 ms
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM set DTR ON
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: MODEM flush i/o
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [34:AT&B1&N0&S0*F0S38.3=1E0V1Q0S0=0H0\r]
Mar  4 16:56:50 linux-2.0.36 FaxGetty[27650]: ANSWER: Can not lock modem device
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=?\r]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [13:0,1,2,2.0,6,8]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=1\r]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:50 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FMFR?\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [5:ZyXEL]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FREV?\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [18:U1496EG V 6.19 M  ]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FTM=?\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FRM=?\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [12:AT+FCLASS=1\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [9:AT+FAA=1\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: MODEM ZYXEL /U1496EG V 6.19 M
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: <-- [5:ATM0\r]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: --> [2:OK]
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: MODEM input buffering disabled
Mar  4 16:56:51 linux-2.0.36 FaxSend[3712]: SEND FAX: JOB 187 DEST 0xxxxxxxxx COMMID 00000309
Mar  4 16:59:32 linux-2.0.36 FaxQueuer[25579]: JOB 187 (active dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:56:13): CMD DONE: exit status 0x200
Mar  4 16:59:32 linux-2.0.36 FaxQueuer[25579]: JOB 187 (done dest +49xxxxxxxxx pri 127 tts 0:00 killtime 2:56:13): SEND DONE: 2:45
Mar  4 16:59:32 linux-2.0.36 FaxQueuer[25579]: NOTIFY: bin/notify "doneq/q187" "done" "2:45"
Mar  4 16:59:50 linux-2.0.36 FaxGetty[27650]: MODEM set DTR OFF
Mar  4 16:59:50 linux-2.0.36 FaxGetty[27650]: DELAY 2600 ms
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM set DTR ON
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM flush i/o
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [34:AT&B1&N0&S0*F0S38.3=1E0V1Q0S0=0H0\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=?\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [13:0,1,2,2.0,6,8]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=1\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FMFR?\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [5:ZyXEL]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FREV?\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [18:U1496EG V 6.19 M  ]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FTM=?\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FRM=?\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [12:AT+FCLASS=1\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [9:AT+FAA=1\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM ZYXEL /U1496EG V 6.19 M
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: <-- [5:ATM0\r]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: --> [2:OK]
Mar  4 16:59:53 linux-2.0.36 FaxGetty[27650]: MODEM input buffering disabled

Follow-Ups:
- Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
  - From: David Woolley <david@djwhome.demon.co.uk>

Prev by Date: Re: received pages not A4
Next by Date: Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
Prev by thread: Loosing lines of a fax
Next by thread: Re: ZYXEL /U1496EG V 6.19 M Hardware Problem ??
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services