|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
FW: EOP trouble
I've seen these types of errors too. What usually happens is that someone
will call me and complain that they get 3 copies of every fax I send. When I
look at the logs, it looks like their fax machine simply hangs up after
receiving the last page of the fax instead of doing the last little bit of
handshaking. I suspect a modification to the source code to ignore errors
after the last page is sent is needed.
-----Original Message-----
From: owner-flexfax@celestial.com [mailto:owner-flexfax@celestial.com]
On Behalf Of Peter Bär
Sent: Friday, January 29, 1999 8:18 PM
To: flexfax@sgi.com
Subject: flexfax: EOP trouble
More and more of these "No response to EOP or MSP" problem reports
appear on this list, as it seems. Normally USR/3Com are blamed for
this, as their Class 2.0 implementation is non-standard.
However, especially in the last few weeks weeks several users of
other modems (Non-3Com) have reported similar trouble.
Myself, I replaced my USR 56k Voice Fax Modem, thinking that this
would cure the problem. Now I have a Maxtech Net Pacer 56k Voice
Fax Modem. It is Class 2, so I thought, my troubles were over, now.
(A different make and a different protocol should really improve
things, I thought ;-)).
However, nothing changed. With certain fax machines I am still
having trouble. Not with fax modems, just with conventional (paper)
fax machines.
After the transmission of the last page (even if there is only one)
I get this error message.
No response to EOP repeated 3 times.
What does that actually mean? And what is it that causes the different
behaviour of fax machines (error) and fax modems (no problem)? I should
mention that the problem occurs with *old* fax machines. With newer
models normally everything is ok.
Any tips and hints and explanations will be greatly appreciated!
Regards
Peter
------------------------------------------------------------------------
>>> FAX TRANSMISSION LOG <<<
****************************
n 30 00:39:56 orion7 FaxQueuer[156]: SUBMIT JOB 7
Jan 30 00:39:56 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222
pri
127 tts 0:00 killtime 2:59:00): PREPARE START
Jan 30 00:39:56 orion7 FaxQueuer[1747]: JOB 7 (active dest
+49109809519522222 pr
i 127 tts 0:00 killtime 2:59:00): CONVERT DOCUMENT: bin/ps2fax -o
docq/doc6.ps;0
0 -r 98 -w 1728 -l 297 -m 30 -1 docq/doc6.ps.7
Jan 30 00:39:56 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing
number
in job request
Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222
pri
127 tts 0:00 killtime 2:58:58): PREPARE DONE
Jan 30 00:39:58 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222
pri
127 tts 0:00 killtime 2:58:58): CMD START /usr/lib/fax/faxsend -m modem
sendq/q
7 (PID 1752)
Jan 30 00:40:00 orion7 FaxSend[1752]: MODEM set DTR OFF
Jan 30 00:40:00 orion7 FaxSend[1752]: DELAY 2600 ms
Jan 30 00:40:00 orion7 FaxGetty[170]: ANSWER: Can not lock modem device
Jan 30 00:40:01 orion7 kernel: lp1 out of paper
Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set DTR ON
Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM set baud rate: 38400 baud, input
flo
w RTS/CTS, output flow RTS/CTS
Jan 30 00:40:02 orion7 FaxSend[1752]: MODEM flush i/o
Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 30 00:40:02 orion7 FaxSend[1752]: --> [14:ATE0V1Q0S0=0H0]
Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Jan 30 00:40:02 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:02 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [9:0,1,2,1.0]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMFR?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [20:ROCKWELL ]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FMDL?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [13:AC/K56^I^I ]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FREV?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [17:V2.077-V90_2M_DLS]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FDCC=?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: -->
[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7
)]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FCQ=?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [1:0]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [9:AT+FAP=?\r]
Jan 30 00:40:03 orion7 FaxSend[1752]: --> [5:ERROR]
Jan 30 00:40:03 orion7 FaxSend[1752]: <-- [10:AT+FSPL=?\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [3:0,1]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [12:AT+FCLASS=2\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FTBC=0\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [10:AT+FBOR=0\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [13:AT+FPHCTO=30\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM ROCKWELL
AC/K56/V2.077-V90_2M_DLS
Jan 30 00:40:04 orion7 FaxSend[1752]: <-- [5:ATM0\r]
Jan 30 00:40:04 orion7 FaxSend[1752]: --> [2:OK]
Jan 30 00:40:04 orion7 FaxSend[1752]: MODEM input buffering disabled
Jan 30 00:40:04 orion7 FaxSend[1752]: SEND FAX: JOB 7 DEST 0109809519522222
COMM
ID 00000029
Jan 30 00:40:11 orion7 kernel: lp1 out of paper
Jan 30 00:40:31 orion7 last message repeated 2 times
Jan 30 00:40:32 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing
number
in job request
Jan 30 00:40:41 orion7 kernel: lp1 out of paper
Jan 30 00:40:51 orion7 kernel: lp1 out of paper
Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (active dest +49109809519522222
pri
127 tts 0:00 killtime 2:58:02): CMD DONE: exit status 0
Jan 30 00:40:54 orion7 FaxQueuer[156]: JOB 7 (sleeping dest
+49109809519522222 p
ri 126 tts 0:00 killtime 2:58:02): SEND INCOMPLETE: requeue for 4:59; No
respons
e to EOP repeated 3 times
Jan 30 00:40:54 orion7 FaxQueuer[156]: NOTIFY: bin/notify "sendq/q7"
"requeued"
"" "00:45"
Jan 30 00:40:57 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing
number
in job request
Jan 30 00:41:00 orion7 FaxGetty[170]: MODEM set DTR OFF
Jan 30 00:41:00 orion7 FaxGetty[170]: DELAY 2600 ms
Jan 30 00:41:01 orion7 kernel: lp1 out of paper
Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set DTR ON
Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM set baud rate: 38400 baud, input
flo
w RTS/CTS, output flow RTS/CTS
Jan 30 00:41:02 orion7 FaxGetty[170]: MODEM flush i/o
Jan 30 00:41:02 orion7 FaxGetty[170]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [9:0,1,2,1.0]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMFR?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [20:ROCKWELL ]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FMDL?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [13:AC/K56^I^I ]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FREV?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [17:V2.077-V90_2M_DLS]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FDCC=?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: -->
[35:(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7
)]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCQ=?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [5:ERROR]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FSPL=?\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [3:0,1]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [12:AT+FCLASS=2\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FTBC=0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [10:AT+FBOR=0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [13:AT+FPHCTO=30\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM ROCKWELL
AC/K56/V2.077-V90_2M_DLS
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [5:ATM0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [9:AT+FCR=1\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FLID="Orion 7"\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: <-- [18:AT+FAA=1+FCLASS=0\r]
Jan 30 00:41:03 orion7 FaxGetty[170]: --> [2:OK]
Jan 30 00:41:03 orion7 FaxGetty[170]: MODEM input buffering disabled
Jan 30 00:41:11 orion7 kernel: lp1 out of paper
Jan 30 00:41:14 orion7 HylaFAX[1749]: sendq/q6: line 51: Null or missing
number
in job request
----------------------------------------------------------------------------
>>> MODEM CONFIGURATION <<<
***************************
CountryCode: 49
AreaCode: 911
FAXNumber: +49.911.731851
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: "etc/dialrules"
ServerTracing: 527
SessionTracing: 527
RecvFileMode: 0644
LogFileMode: 0600
DeviceMode: 0666
RingsBeforeAnswer: 4
SpeakerVolume: off
GettyArgs: "-r -b -s %s %l"
LocalIdentifier: "Orion 7"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 38400
ModemFlowControl: rtscts # default
#
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
#ModemSetupDTRCmd: AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
#
ModemAnswerFaxBeginCmd: "<19200><xon>" # modem switches on fax receive
#
# Caller ID configuration setup for Supra.
#
#QualifyCID: etc/cid # CID access control list file
#CIDNumber: "NMBR = " # pattern string for phone number
info
#CIDName: "NAME = " # pattern string for identity info
--
---------------------------------------------------------------------
The manual said the software required Windows 95
or better, so I installed Linux.
>>> comet.friend@gmx.net <<<
---------------------------------------------------------------------
