Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Problems with 3com/USR 56k Voice Faxmodem / Maillist archive



Hello,

I have some problems with 3com/USR 56k Voice Faxmodems and HylaFAX. We have
two normal but different faxstatios. The modems do work with station A but
refuse to work with station B. The modems dial to station B, establish a
connection (tested with minicom) but HylaFAX doesn't seem to notice... here
are the logs:

Station A:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dec 29 11:42:11.40: [19868]: SESSION BEGIN 00000047 494619090031
Dec 29 11:42:11.40: [19868]: SEND FAX: JOB 32 DEST +49.461.9090031 COMMID 00000047
Dec 29 11:42:11.40: [19868]: MODEM set DTR OFF
Dec 29 11:42:11.40: [19868]: DELAY 2600 ms
Dec 29 11:42:14.00: [19868]: MODEM set DTR ON
Dec 29 11:42:14.00: [19868]: MODEM set baud rate: 115200 baud, input flow RTS/CTS, output flow RTS/CTS
Dec 29 11:42:14.00: [19868]: MODEM flush i/o
Dec 29 11:42:14.00: [19868]: <-- [21:ATS40=15E0V1Q0S0=0H0\r]
Dec 29 11:42:14.13: [19868]: --> [2:OK]
Dec 29 11:42:14.13: [19868]: <-- [12:ATS8=2S7=60\r]
Dec 29 11:42:14.26: [19868]: --> [2:OK]
Dec 29 11:42:14.26: [19868]: <-- [14:AT+FCLASS=2.0\r]
Dec 29 11:42:14.39: [19868]: --> [2:OK]
Dec 29 11:42:14.39: [19868]: <-- [9:AT+FLO=2\r]
Dec 29 11:42:14.52: [19868]: --> [2:OK]
Dec 29 11:42:14.52: [19868]: <-- [9:AT+FPP=0\r]
Dec 29 11:42:14.65: [19868]: --> [2:OK]
Dec 29 11:42:14.65: [19868]: <-- [9:AT+FBO=0\r]
Dec 29 11:42:14.78: [19868]: --> [2:OK]
Dec 29 11:42:14.78: [19868]: <-- [10:AT+FCT=30\r]
Dec 29 11:42:14.91: [19868]: --> [2:OK]
Dec 29 11:42:14.91: [19868]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 29 11:42:15.04: [19868]: --> [2:OK]
Dec 29 11:42:15.04: [19868]: <-- [9:AT+FIE=0\r]
Dec 29 11:42:15.17: [19868]: --> [2:OK]
Dec 29 11:42:15.17: [19868]: <-- [9:AT+FBU=1\r]
Dec 29 11:42:15.30: [19868]: --> [5:ERROR]
Dec 29 11:42:15.30: [19868]: MODEM Command error
Dec 29 11:42:15.30: [19868]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 29 11:42:15.43: [19868]: --> [2:OK]
Dec 29 11:42:15.43: [19868]: <-- [7:ATL2M1\r]
Dec 29 11:42:15.56: [19868]: --> [2:OK]
Dec 29 11:42:15.56: [19868]: MODEM input buffering enabled
Dec 29 11:42:15.56: [19868]: <-- [14:AT+FCLASS=2.0\r]
Dec 29 11:42:15.79: [19868]: --> [2:OK]
Dec 29 11:42:15.79: [19868]: <-- [9:AT+FLO=2\r]
Dec 29 11:42:16.02: [19868]: --> [2:OK]
Dec 29 11:42:16.02: [19868]: <-- [9:AT+FPP=0\r]
Dec 29 11:42:16.25: [19868]: --> [2:OK]
Dec 29 11:42:16.25: [19868]: <-- [9:AT+FBO=0\r]
Dec 29 11:42:16.48: [19868]: --> [2:OK]
Dec 29 11:42:16.48: [19868]: <-- [10:AT+FCT=30\r]
Dec 29 11:42:16.71: [19868]: --> [2:OK]
Dec 29 11:42:16.71: [19868]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 29 11:42:16.94: [19868]: --> [2:OK]
Dec 29 11:42:16.94: [19868]: <-- [9:AT+FIE=0\r]
Dec 29 11:42:17.17: [19868]: --> [2:OK]
Dec 29 11:42:17.17: [19868]: <-- [9:AT+FBU=1\r]
Dec 29 11:42:17.40: [19868]: --> [5:ERROR]
Dec 29 11:42:17.40: [19868]: MODEM Command error
Dec 29 11:42:17.40: [19868]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 29 11:42:17.63: [19868]: --> [2:OK]
Dec 29 11:42:17.63: [19868]: <-- [29:AT+FLI="KomTel Faxserver L2"\r]
Dec 29 11:42:17.86: [19868]: --> [2:OK]
Dec 29 11:42:17.88: [19868]: DIAL 9090031
Dec 29 11:42:17.88: [19868]: <-- [14:ATDT09090031@\r]
Dec 29 11:42:34.18: [19868]: --> [4:+FCO]
Dec 29 11:42:37.30: [19868]: --> [36:+FNF:€ŠIKOMTEL          O€€ØŽ]
Dec 29 11:42:37.30: [19868]: REMOTE NSF "€ŠIKOMTEL          O€€ØŽ"
Dec 29 11:42:37.30: [19868]: --> [27:+FCI:"     +49 461 9090021"]
Dec 29 11:42:37.30: [19868]: REMOTE CSI "+49 461 9090021"
Dec 29 11:42:37.30: [19868]: --> [20:+FIS:1,5,0,2,1,0,0,3]
Dec 29 11:42:37.30: [19868]: --> [2:OK]
Dec 29 11:42:37.30: [19868]: REMOTE best rate 14400 bit/s
Dec 29 11:42:37.30: [19868]: REMOTE max page width 1728 pixels in 215 mm
Dec 29 11:42:37.30: [19868]: REMOTE max unlimited page length 
Dec 29 11:42:37.30: [19868]: REMOTE best vres 7.7 line/mm
Dec 29 11:42:37.30: [19868]: REMOTE best format 2-D MR
Dec 29 11:42:37.30: [19868]: REMOTE best 10 ms/scanline
Dec 29 11:42:37.30: [19868]: USE 14400 bit/s
Dec 29 11:42:37.30: [19868]: USE 10 ms/scanline
Dec 29 11:42:37.30: [19868]: SEND file "docq/doc36.ps;31"
Dec 29 11:42:37.40: [19868]: USE page width 1728 pixels in 215 mm
Dec 29 11:42:37.40: [19868]: USE unlimited page length 
Dec 29 11:42:37.40: [19868]: USE 7.7 line/mm
Dec 29 11:42:37.40: [19868]: USE 1-D MR
Dec 29 11:42:37.40: [19868]: <-- [23:AT+FIS=1,5,0,2,0,0,0,3\r]
Dec 29 11:42:37.63: [19868]: --> [2:OK]
Dec 29 11:42:37.63: [19868]: <-- [7:AT+FDT\r]
Dec 29 11:42:37.90: [19868]: --> [20:+FCS:1,5,0,2,0,0,0,3]
Dec 29 11:42:44.52: [19868]: --> [7:CONNECT]
Dec 29 11:42:44.52: [19868]: SEND begin page
Dec 29 11:42:44.58: [19868]: <-- data [1026]
Dec 29 11:42:44.58: [19868]: <-- data [1028]
Dec 29 11:42:44.58: [19868]: <-- data [1036]
Dec 29 11:42:44.58: [19868]: <-- data [640]
Dec 29 11:42:44.58: [19868]: SENT 3712 bytes of data
Dec 29 11:42:44.58: [19868]: SEND 1D RTC
Dec 29 11:42:44.58: [19868]: <-- data [9]
Dec 29 11:42:44.58: [19868]: SEND end page
Dec 29 11:42:44.58: [19868]: SEND send EOP (no more pages or documents)
Dec 29 11:42:44.58: [19868]: <-- data [2]
Dec 29 11:42:52.20: [19868]: --> [7:+FHS:00]
Dec 29 11:42:52.20: [19868]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Dec 29 11:42:52.20: [19868]: SEND recv MCF (message confirmation)
Dec 29 11:42:52.21: [19868]: SEND FAX (00000047): FROM root@faxserver.komtel.lan TO +49.461.9090031 (page 1 of 1 sent in 0:15)
Dec 29 11:42:52.21: [19868]: SEND FAX (00000047): FROM root@faxserver.komtel.lan TO +49.461.9090031 (docq/doc36.ps;31 sent in 0:15)
Dec 29 11:42:52.24: [19868]: <-- [5:ATH0\r]
Dec 29 11:42:52.34: [19868]: --> [2:OK]
Dec 29 11:42:52.34: [19868]: MODEM set DTR OFF
Dec 29 11:42:52.36: [19868]: SESSION END
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -


Station B:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dec 29 11:44:56.36: [19882]: SESSION BEGIN 00000048 494619090021
Dec 29 11:44:56.36: [19882]: SEND FAX: JOB 33 DEST +49.461.9090021 COMMID 00000048
Dec 29 11:44:56.36: [19882]: MODEM set DTR OFF
Dec 29 11:44:56.36: [19882]: DELAY 2600 ms
Dec 29 11:44:58.97: [19882]: MODEM set DTR ON
Dec 29 11:44:58.97: [19882]: MODEM set baud rate: 115200 baud, input flow RTS/CTS, output flow RTS/CTS
Dec 29 11:44:58.97: [19882]: MODEM flush i/o
Dec 29 11:44:58.97: [19882]: <-- [23:ATS40=15E0V1Q0X3S0=0H0\r]
Dec 29 11:44:59.10: [19882]: --> [2:OK]
Dec 29 11:44:59.10: [19882]: <-- [12:ATS8=2S7=60\r]
Dec 29 11:44:59.23: [19882]: --> [2:OK]
Dec 29 11:44:59.23: [19882]: <-- [14:AT+FCLASS=2.0\r]
Dec 29 11:44:59.36: [19882]: --> [2:OK]
Dec 29 11:44:59.36: [19882]: <-- [9:AT+FLO=2\r]
Dec 29 11:44:59.49: [19882]: --> [2:OK]
Dec 29 11:44:59.49: [19882]: <-- [9:AT+FPP=0\r]
Dec 29 11:44:59.62: [19882]: --> [2:OK]
Dec 29 11:44:59.62: [19882]: <-- [9:AT+FBO=0\r]
Dec 29 11:44:59.75: [19882]: --> [2:OK]
Dec 29 11:44:59.75: [19882]: <-- [10:AT+FCT=30\r]
Dec 29 11:44:59.88: [19882]: --> [2:OK]
Dec 29 11:44:59.88: [19882]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 29 11:45:00.01: [19882]: --> [2:OK]
Dec 29 11:45:00.01: [19882]: <-- [9:AT+FIE=0\r]
Dec 29 11:45:00.14: [19882]: --> [2:OK]
Dec 29 11:45:00.14: [19882]: <-- [9:AT+FBU=1\r]
Dec 29 11:45:00.27: [19882]: --> [5:ERROR]
Dec 29 11:45:00.27: [19882]: MODEM Command error
Dec 29 11:45:00.27: [19882]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 29 11:45:00.40: [19882]: --> [2:OK]
Dec 29 11:45:00.40: [19882]: <-- [7:ATL2M1\r]
Dec 29 11:45:00.53: [19882]: --> [2:OK]
Dec 29 11:45:00.53: [19882]: MODEM input buffering enabled
Dec 29 11:45:00.53: [19882]: <-- [14:AT+FCLASS=2.0\r]
Dec 29 11:45:00.76: [19882]: --> [2:OK]
Dec 29 11:45:00.76: [19882]: <-- [9:AT+FLO=2\r]
Dec 29 11:45:00.99: [19882]: --> [2:OK]
Dec 29 11:45:00.99: [19882]: <-- [9:AT+FPP=0\r]
Dec 29 11:45:01.22: [19882]: --> [2:OK]
Dec 29 11:45:01.22: [19882]: <-- [9:AT+FBO=0\r]
Dec 29 11:45:01.45: [19882]: --> [2:OK]
Dec 29 11:45:01.45: [19882]: <-- [10:AT+FCT=30\r]
Dec 29 11:45:01.68: [19882]: --> [2:OK]
Dec 29 11:45:01.68: [19882]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 29 11:45:01.91: [19882]: --> [2:OK]
Dec 29 11:45:01.91: [19882]: <-- [9:AT+FIE=0\r]
Dec 29 11:45:02.14: [19882]: --> [2:OK]
Dec 29 11:45:02.14: [19882]: <-- [9:AT+FBU=1\r]
Dec 29 11:45:02.37: [19882]: --> [5:ERROR]
Dec 29 11:45:02.37: [19882]: MODEM Command error
Dec 29 11:45:02.37: [19882]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 29 11:45:02.60: [19882]: --> [2:OK]
Dec 29 11:45:02.60: [19882]: <-- [29:AT+FLI="KomTel Faxserver L2"\r]
Dec 29 11:45:02.83: [19882]: --> [2:OK]
Dec 29 11:45:02.85: [19882]: DIAL 9090021
Dec 29 11:45:02.85: [19882]: <-- [14:ATDT09090021@\r]
Dec 29 11:46:00.57: [19882]: --> [9:NO ANSWER]
Dec 29 11:46:00.57: [19882]: SEND FAILED: No answer from remote
Dec 29 11:46:00.57: [19882]: <-- [5:ATH0\r]
Dec 29 11:46:00.80: [19882]: --> [2:OK]
Dec 29 11:46:00.80: [19882]: MODEM set DTR OFF
Dec 29 11:46:00.80: [19882]: SESSION END
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Regards,
Okke.



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services