Problem SENDING FAX

To: flexfax@sgi.com
Subject: flexfax: Problem SENDING FAX
From: HF <hylafax@astra.sif.it>
Date: Thu, 17 Dec 1998 00:39:20 +0100 (CET)

Hi have some problems sending faxes with a zyxel 2864i

Here is what i get on my log:

Dec 16 23:51:35.02: [10994]: SESSION BEGIN 00000076 395434486
Dec 16 23:51:35.02: [10994]: SEND FAX: JOB 25 DEST 05434486 COMMID
00000076
Dec 16 23:51:35.02: [10994]: DELAY 2600 ms
Dec 16 23:51:37.63: [10994]: <-- [24:AT&B1&N0&S0E0V1Q0S0=0H0\r]
Dec 16 23:51:37.66: [10994]: --> [2:OK]
Dec 16 23:51:37.66: [10994]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Dec 16 23:51:37.69: [10994]: --> [2:OK]
Dec 16 23:51:37.69: [10994]: <-- [14:AT+FCLASS=2.0\r]
Dec 16 23:51:37.71: [10994]: --> [2:OK]
Dec 16 23:51:37.71: [10994]: <-- [9:AT+FLO=2\r]
Dec 16 23:51:37.73: [10994]: --> [2:OK]
Dec 16 23:51:37.73: [10994]: <-- [9:AT+FPP=0\r]
Dec 16 23:51:37.75: [10994]: --> [2:OK]
Dec 16 23:51:37.75: [10994]: <-- [9:AT+FBO=0\r]
Dec 16 23:51:37.77: [10994]: --> [2:OK]
Dec 16 23:51:37.77: [10994]: <-- [10:AT+FCT=30\r]
Dec 16 23:51:37.80: [10994]: --> [2:OK]
Dec 16 23:51:37.80: [10994]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 16 23:51:37.83: [10994]: --> [2:OK]
Dec 16 23:51:37.83: [10994]: <-- [9:AT+FIE=0\r]
Dec 16 23:51:37.85: [10994]: --> [2:OK]
Dec 16 23:51:37.85: [10994]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 16 23:51:37.88: [10994]: --> [2:OK]
Dec 16 23:51:37.88: [10994]: <-- [5:ATM0\r]
Dec 16 23:51:37.90: [10994]: --> [2:OK]
Dec 16 23:51:37.90: [10994]: <-- [14:AT+FCLASS=2.0\r]
Dec 16 23:51:38.02: [10994]: --> [2:OK]
Dec 16 23:51:38.02: [10994]: <-- [9:AT+FLO=2\r]
Dec 16 23:51:38.14: [10994]: --> [2:OK]
Dec 16 23:51:38.14: [10994]: <-- [9:AT+FPP=0\r]
Dec 16 23:51:38.26: [10994]: --> [2:OK]
Dec 16 23:51:38.26: [10994]: <-- [9:AT+FBO=0\r]
Dec 16 23:51:38.39: [10994]: --> [2:OK]
Dec 16 23:51:38.39: [10994]: <-- [10:AT+FCT=30\r]
Dec 16 23:51:38.51: [10994]: --> [2:OK]
Dec 16 23:51:38.51: [10994]: <-- [15:AT+FNR=1,1,1,1\r]
Dec 16 23:51:38.63: [10994]: --> [2:OK]
Dec 16 23:51:38.63: [10994]: <-- [9:AT+FIE=0\r]
Dec 16 23:51:38.75: [10994]: --> [2:OK]
Dec 16 23:51:38.75: [10994]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Dec 16 23:51:38.88: [10994]: --> [2:OK]
Dec 16 23:51:38.88: [10994]: <-- [21:AT+FLI="39515813"\r]
Dec 16 23:51:39.01: [10994]: --> [2:OK]
Dec 16 23:51:39.01: [10994]: DIAL 0543448644
Dec 16 23:51:39.01: [10994]: <-- [15:ATDT05434486\r]
Dec 16 23:51:50.86: [10994]: --> [4:+FCO]
Dec 16 23:51:51.00: [10994]: --> [120:+FNF:00 00 25 00 00 00 12 10 4D 02 00 50 00 2A B8 2C 00 00 25 01 53 41 41 56 20 49 43 49 4D 49 48 43 20 52 4F 43 53 41  ]
Dec 16 23:51:51.00: [10994]: REMOTE NSF "00 00 25 00 00 00 12 10 4D 02 00 50 00 2A B8 2C 00 00 25 01 53 41 41 56 20 49 43 49 4D 49 48 43 20 52 4F 43 53 41"
Dec 16 23:51:51.00: [10994]: --> [26:+FCI:     0039 543 448644 ]
Dec 16 23:51:51.00: [10994]: REMOTE CSI "0039 543 4486"
Dec 16 23:51:51.00: [10994]: --> [20:+FIS:1,5,0,2,1,1,0,2]
Dec 16 23:51:51.00: [10994]: --> [2:OK]
Dec 16 23:51:51.00: [10994]: REMOTE best rate 14400 bit/s
Dec 16 23:51:51.00: [10994]: REMOTE max page width 1728 pixels in 215 mm
Dec 16 23:51:51.00: [10994]: REMOTE max unlimited page length 
Dec 16 23:51:51.00: [10994]: REMOTE best vres 7.7 line/mm
Dec 16 23:51:51.00: [10994]: REMOTE best format 2-D MR
Dec 16 23:51:51.00: [10994]: REMOTE supports T.30 Annex A, ECM
Dec 16 23:51:51.00: [10994]: REMOTE best 10 ms, 5 ms/scanline
Dec 16 23:51:51.00: [10994]: USE 14400 bit/s
Dec 16 23:51:51.00: [10994]: USE 10 ms, 5 ms/scanline
Dec 16 23:51:51.00: [10994]: SEND file "docq/doc38.ps;00"
Dec 16 23:51:51.00: [10994]: USE page width 1728 pixels in 215 mm
Dec 16 23:51:51.00: [10994]: USE unlimited page length 
Dec 16 23:51:51.00: [10994]: USE 3.85 line/mm
Dec 16 23:51:51.00: [10994]: USE 1-D MR
Dec 16 23:51:51.00: [10994]: <-- [23:AT+FIS=0,5,0,2,0,0,0,2\r]
Dec 16 23:51:51.13: [10994]: --> [2:OK]
Dec 16 23:51:51.13: [10994]: <-- [7:AT+FDT\r]
Dec 16 23:51:58.25: [10994]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Dec 16 23:51:58.69: [10994]: --> [7:CONNECT]
Dec 16 23:51:58.69: [10994]: SEND begin page
Dec 16 23:51:58.69: [10994]: <-- data [1033]
Dec 16 23:51:58.69: [10994]: <-- data [1025]
Dec 16 23:51:58.69: [10994]: <-- data [1025]
Dec 16 23:51:58.69: [10994]: <-- data [1025]
Dec 16 23:51:58.69: [10994]: <-- data [1025]
Dec 16 23:52:00.69: [10994]: <-- data [1026]
Dec 16 23:52:00.69: [10994]: <-- data [1030]
Dec 16 23:52:00.69: [10994]: <-- data [1034]
Dec 16 23:52:02.68: [10994]: <-- data [1028]
Dec 16 23:52:02.69: [10994]: <-- data [1026]
Dec 16 23:52:02.69: [10994]: <-- data [1034]
Dec 16 23:52:02.69: [10994]: <-- data [1034]
Dec 16 23:52:04.68: [10994]: <-- data [1041]
Dec 16 23:52:04.68: [10994]: <-- data [1027]
Dec 16 23:52:04.68: [10994]: <-- data [1025]
Dec 16 23:52:04.68: [10994]: <-- data [1027]
Dec 16 23:52:06.68: [10994]: <-- data [1024]
Dec 16 23:52:06.68: [10994]: <-- data [1026]
Dec 16 23:52:06.68: [10994]: <-- data [1024]
Dec 16 23:52:08.67: [10994]: <-- data [1026]
Dec 16 23:52:08.67: [10994]: <-- data [1025]
Dec 16 23:52:08.67: [10994]: <-- data [458]
Dec 16 23:52:08.67: [10994]: SENT 21960 bytes of data
Dec 16 23:52:08.67: [10994]: SEND 1D RTC
Dec 16 23:52:08.67: [10994]: <-- data [9]
Dec 16 23:52:08.67: [10994]: SEND end page
Dec 16 23:52:08.67: [10994]: SEND send MPS (more pages, same document)
Dec 16 23:52:08.67: [10994]: <-- data [2]
Dec 16 23:52:19.96: [10994]: --> [5:ERROR]
Dec 16 23:52:19.96: [10994]: SEND recv RTN (retrain negative)
Dec 16 23:52:19.96: [10994]: <-- [7:AT+FDT\r]
Dec 16 23:52:26.88: [10994]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Dec 16 23:52:27.32: [10994]: --> [7:CONNECT]
Dec 16 23:52:27.32: [10994]: SEND begin page
Dec 16 23:52:27.32: [10994]: <-- data [1033]
Dec 16 23:52:27.32: [10994]: <-- data [1025]
Dec 16 23:52:27.32: [10994]: <-- data [1025]
Dec 16 23:52:27.32: [10994]: <-- data [1025]
Dec 16 23:52:27.32: [10994]: <-- data [1025]
Dec 16 23:52:29.32: [10994]: <-- data [1026]
Dec 16 23:52:29.32: [10994]: <-- data [1030]
Dec 16 23:52:29.32: [10994]: <-- data [1034]
Dec 16 23:52:31.31: [10994]: <-- data [1028]
Dec 16 23:52:31.31: [10994]: <-- data [1026]
Dec 16 23:52:31.32: [10994]: <-- data [1034]
Dec 16 23:52:31.32: [10994]: <-- data [1034]
Dec 16 23:52:33.31: [10994]: <-- data [1041]
Dec 16 23:52:33.31: [10994]: <-- data [1027]
Dec 16 23:52:33.31: [10994]: <-- data [1025]
Dec 16 23:52:33.31: [10994]: <-- data [1027]
Dec 16 23:52:35.31: [10994]: <-- data [1024]
Dec 16 23:52:35.31: [10994]: <-- data [1026]
Dec 16 23:52:35.31: [10994]: <-- data [1024]
Dec 16 23:52:37.30: [10994]: <-- data [1026]
Dec 16 23:52:37.30: [10994]: <-- data [1025]
Dec 16 23:52:37.30: [10994]: <-- data [458]
Dec 16 23:52:37.30: [10994]: SENT 21960 bytes of data
Dec 16 23:52:37.30: [10994]: SEND 1D RTC
Dec 16 23:52:37.30: [10994]: <-- data [9]
Dec 16 23:52:37.30: [10994]: SEND end page
Dec 16 23:52:37.30: [10994]: SEND send MPS (more pages, same document)
Dec 16 23:52:37.30: [10994]: <-- data [2]
Dec 16 23:52:48.59: [10994]: --> [5:ERROR]
Dec 16 23:52:48.59: [10994]: SEND recv RTN (retrain negative)
Dec 16 23:52:48.59: [10994]: <-- [7:AT+FDT\r]
Dec 16 23:52:55.49: [10994]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Dec 16 23:52:55.94: [10994]: --> [7:CONNECT]
Dec 16 23:52:55.94: [10994]: SEND begin page
Dec 16 23:52:55.94: [10994]: <-- data [1033]
Dec 16 23:52:55.94: [10994]: <-- data [1025]
Dec 16 23:52:55.94: [10994]: <-- data [1025]
Dec 16 23:52:55.94: [10994]: <-- data [1025]
Dec 16 23:52:55.94: [10994]: <-- data [1025]
Dec 16 23:52:57.94: [10994]: <-- data [1026]
Dec 16 23:52:57.94: [10994]: <-- data [1030]
Dec 16 23:52:57.94: [10994]: <-- data [1034]
Dec 16 23:52:59.93: [10994]: <-- data [1028]
Dec 16 23:52:59.94: [10994]: <-- data [1026]
Dec 16 23:52:59.94: [10994]: <-- data [1034]
Dec 16 23:52:59.94: [10994]: <-- data [1034]
Dec 16 23:53:01.93: [10994]: <-- data [1041]
Dec 16 23:53:01.93: [10994]: <-- data [1027]
Dec 16 23:53:01.93: [10994]: <-- data [1025]
Dec 16 23:53:01.93: [10994]: <-- data [1027]
Dec 16 23:53:03.93: [10994]: <-- data [1024]
Dec 16 23:53:03.93: [10994]: <-- data [1026]
Dec 16 23:53:03.93: [10994]: <-- data [1024]
Dec 16 23:53:05.92: [10994]: <-- data [1026]
Dec 16 23:53:05.92: [10994]: <-- data [1025]
Dec 16 23:53:05.92: [10994]: <-- data [458]
Dec 16 23:53:05.92: [10994]: SENT 21960 bytes of data
Dec 16 23:53:05.92: [10994]: SEND 1D RTC
Dec 16 23:53:05.92: [10994]: <-- data [9]
Dec 16 23:53:05.92: [10994]: SEND end page
Dec 16 23:53:05.92: [10994]: SEND send MPS (more pages, same document)
Dec 16 23:53:05.93: [10994]: <-- data [2]
Dec 16 23:53:17.18: [10994]: --> [5:ERROR]
Dec 16 23:53:17.18: [10994]: SEND recv RTN (retrain negative)
Dec 16 23:53:17.18: [10994]: <-- [7:AT+FKS\r]
Dec 16 23:53:18.64: [10994]: --> [7:+FHS:02]
Dec 16 23:53:18.64: [10994]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
Dec 16 23:53:18.64: [10994]: --> [5:ERROR]
Dec 16 23:53:18.64: [10994]: MODEM Command error
Dec 16 23:53:18.64: [10994]: <-- [5:ATH0\r]
Dec 16 23:53:18.83: [10994]: --> [10:NO CARRIER]
Dec 16 23:53:18.83: [10994]: MODEM No carrier
Dec 16 23:53:18.83: [10994]: SESSION END

Any Idea ?

Alex
Prev by Date: Re: request for Solaris-2.6 inittab entry for faxgetty startup
Next by Date: Multiple fax numbers for single message
Prev by thread: sendfax -F option
Next by thread: Multiple fax numbers for single message
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services