Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

US Robotics Sportster VI class C error



my system: Hylafax Version 4.0pl2, Linux Suse 5.2,
modem:  US Robotics Sportster VI (class 2.0)

problem_description: When receiving faxes with "hylafax" i'am getting the
following error messages:

Dec 01 15:19:18.61: [  163]: SESSION BEGIN 00001206 4940867409
Dec 01 15:19:18.61: [  163]: <-- [4:ATA\r]
Dec 01 15:19:31.83: [  163]: --> [4:+FCO]
Dec 01 15:19:31.83: [  163]: ANSWER: FAX CONNECTION
Dec 01 15:19:31.83: [  163]: MODEM input buffering enabled
Dec 01 15:19:31.83: [  163]: RECV FAX: begin
Dec 01 15:19:33.50: [  163]: --> [27:+FTI:"004 01 2500169      "]
Dec 01 15:19:33.50: [  163]: REMOTE TSI "004 01 2500169"
Dec 01 15:19:33.77: [  163]: --> [20:+FCS:0,3,0,2,0,0,0,5]
Dec 01 15:19:33.77: [  163]: REMOTE wants 9600 bit/s
Dec 01 15:19:33.77: [  163]: REMOTE wants page width 1728 pixels in 215 mm
Dec 01 15:19:33.77: [  163]: REMOTE wants unlimited page length
Dec 01 15:19:33.77: [  163]: REMOTE wants 3.85 line/mm
Dec 01 15:19:33.77: [  163]: REMOTE wants 1-D MR
Dec 01 15:19:33.88: [  163]: --> [2:OK]
Dec 01 15:19:33.88: [  163]: <-- [7:AT+FDR\r]
Dec 01 15:19:35.96: [  163]: --> [20:+FCS:0,3,0,2,0,0,0,5]
Dec 01 15:19:35.96: [  163]: REMOTE wants 9600 bit/s
Dec 01 15:19:35.96: [  163]: REMOTE wants page width 1728 pixels in 215 mm
Dec 01 15:19:35.96: [  163]: REMOTE wants unlimited page length
Dec 01 15:19:35.96: [  163]: REMOTE wants 3.85 line/mm
Dec 01 15:19:35.96: [  163]: REMOTE wants 1-D MR
Dec 01 15:19:38.17: [  163]: --> [7:CONNECT]
Dec 01 15:19:38.17: [  163]: RECV: begin page
Dec 01 15:19:38.17: [  163]: RECV: send trigger 022
Dec 01 15:19:38.17: [  163]: <-- data [1]
Dec 01 15:20:06.30: [  163]: RECV: 38 total lines, 37 bad lines, 37
consecutive bad lines
Dec 01 15:20:06.30: [  163]: --> [15:+FPS:1,69,0,0,0]
Dec 01 15:20:07.59: [  163]: --> [6:+FET:2]
Dec 01 15:20:07.59: [  163]: RECV recv EOP (no more pages or documents)
Dec 01 15:20:07.59: [  163]: --> [2:OK]
Dec 01 15:20:07.59: [  163]: RECV: REJECT page quality, 2% good lines (95%
required)
Dec 01 15:20:07.59: [  163]: RECV send RTN (retrain negative)
Dec 01 15:20:07.59: [  163]: <-- [9:AT+FPS=2\r]
Dec 01 15:20:07.74: [  163]: --> [5:ERROR]
Dec 01 15:20:07.74: [  163]: MODEM Command error
Dec 01 15:20:07.74: [  163]: REMOTE HANGUP: Unspecified Phase C error,
including too much delay between TCF and +FDR command (code 90)
Dec 01 15:20:07.74: [  163]: RECV FAX (00001206): recvq/fax00730.tif from
004 01 2500169, route to <unspecified>, 0 pages in 0:36
Dec 01 15:20:07.75: [  163]: RECV FAX: Unspecified Phase C error, including
too much delay between TCF and +FDR command
Dec 01 15:20:07.75: [  163]: <-- [7:AT+FKS\r]
Dec 01 15:20:09.29: [  163]: --> [7:+FHS:02]
Dec 01 15:20:09.29: [  163]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Dec 01 15:20:09.29: [  163]: --> [2:OK]
Dec 01 15:20:09.29: [  163]: RECV FAX (00001206): session with 004 01
2500169 terminated abnormally: Unspecified Phase C error, including too much
delay between TCF and +FDR command
Dec 01 15:20:09.29: [  163]: RECV FAX: bin/faxrcvd "recvq/fax00730.tif"
"ttyS1" "00001206" "Unspecified Phase C error, including too much delay
between TCF and +FDR command"
Dec 01 15:20:09.92: [  163]: RECV FAX: end
Dec 01 15:20:09.92: [  163]: SESSION END


It seems to me that this is a software problem. Does anybody have a
suggestion on how to solve it.

Alexander Paprottka
alex@paprottka.com

____________________________
GEBR. PAPROTTKA GMBH
POB 770, 22587 Hamburg
Phone: +49 40 863916
Fax: +49 40 867409
http://www.paprottka.com
____________________________



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services