flexfax: problems receiving with multitech

[Andy Smith <abs@maunsell.co.uk>]

Hi,

I have inbound and outbound faxes working fine on a 28800 multitech,
(MODEM MULTI-TECH SYSTEMS MT2834ZDXI/0312 - v4.0pl2/Solaris/sparc) and
am trying now to get a second modem working (thanks all, got cua/a
working fine now).  I have a number of (older) multitechs which I
thought, given the success of the MT2834ZDXI, I would try.  They
identify themselves as :-

MODEM MULTI-TECH SYSTEMS MT1432BLK/0109A

and faxaddmodem configures them the same as the MT2834ZDXI.  However,
I have tried 2 of them, they send OK, but wont receive, I have included
below the error they give.

Can anyone shed any light on the cause of the error message
"[8:+FHNG:73]"?  This is repeatable from a number of different fax
machines.

The MT1432BLK is not mentioned specifically in the documentation,
though the MT1432 range is one of the recommended modems.  I presume
therefore that the modem configuration (dip switches - ugh!) is at
fault.

Thanks.

-----Forwarded message from The HylaFAX Receive Agent <fax@maunsell.co.uk>-----

An attempt to receive facsimile on cua_a failed because:

    T.30 T2 timeout, expected page not received

    ---- Transcript of session follows ----

Dec 02 08:30:49.14: [ 7271]: SESSION BEGIN 00002091 441816631490
Dec 02 08:30:49.15: [ 7271]: <-- [4:ATA\r]
Dec 02 08:30:58.61: [ 7271]: --> [5:+FCON]
Dec 02 08:30:58.61: [ 7271]: ANSWER: FAX CONNECTION
Dec 02 08:30:58.62: [ 7271]: RECV FAX: begin
Dec 02 08:31:03.84: [ 7271]: --> [28:+FTSI:"     9 0181 663 6723"]
Dec 02 08:31:03.84: [ 7271]: REMOTE TSI "9 0181 663 6723"
Dec 02 08:31:03.84: [ 7271]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Dec 02 08:31:03.85: [ 7271]: REMOTE wants 14400 bit/s
Dec 02 08:31:03.85: [ 7271]: REMOTE wants page width 1728 pixels in 215 mm
Dec 02 08:31:03.86: [ 7271]: REMOTE wants unlimited page length 
Dec 02 08:31:03.86: [ 7271]: REMOTE wants 3.85 line/mm
Dec 02 08:31:03.86: [ 7271]: REMOTE wants 1-D MR
Dec 02 08:31:03.87: [ 7271]: --> [2:OK]
Dec 02 08:31:03.87: [ 7271]: <-- [7:AT+FDR\r]
Dec 02 08:31:05.33: [ 7271]: --> [5:+FCFR]
Dec 02 08:31:05.33: [ 7271]: --> [28:+FTSI:"     9 0181 663 6723"]
Dec 02 08:31:05.33: [ 7271]: REMOTE TSI "9 0181 663 6723"
Dec 02 08:31:05.34: [ 7271]: --> [21:+FDCS:0,5,0,2,0,0,0,1]
Dec 02 08:31:05.34: [ 7271]: REMOTE wants 14400 bit/s
Dec 02 08:31:05.35: [ 7271]: REMOTE wants page width 1728 pixels in 215 mm
Dec 02 08:31:05.35: [ 7271]: REMOTE wants unlimited page length 
Dec 02 08:31:05.35: [ 7271]: REMOTE wants 3.85 line/mm
Dec 02 08:31:05.36: [ 7271]: REMOTE wants 1-D MR
Dec 02 08:31:14.25: [ 7271]: --> [8:+FHNG:73]
Dec 02 08:31:14.25: [ 7271]: REMOTE HANGUP: T.30 T2 timeout, expected page not received (code 73)
Dec 02 08:31:14.26: [ 7271]: RECV FAX (00002091): recvq/fax01831.tif from 9 0181 663 6723, route to <unspecified>, 0 pages in 0:16
Dec 02 08:31:14.27: [ 7271]: RECV FAX: T.30 T2 timeout, expected page not received
Dec 02 08:31:14.30: [ 7271]: RECV FAX (00002091): session with 9 0181 663 6723 terminated abnormally: T.30 T2 timeout, expected page not received
Dec 02 08:31:14.30: [ 7271]: RECV FAX: bin/faxrcvd "recvq/fax01831.tif" "cua_a" "00002091" "T.30 T2 timeout, expected page not received"

-----End of forwarded message-----

-- 
  _          __         Maunsell Ltd, IT Unit    Tel  : 0181-663-6565
 /_|   _/   (  _  '_//  160 Croydon Road,        Fax  : 0181-663-6723
(  |/)(/(/ __)//)/ //)  Beckenham, Kent BR3 4DE  Email: abs@maunsell.co.uk
        /               England.                 -or- abs@maunsl00.demon.co.uk