Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Hylafax send allways with 98 dpi



On 12 Aug 1998 21:31:52 +0200 Sascha Ziemann wrote:
> Hi,
> 
> how can I change the the dpi rate to 196? I tied to define the ps2fax
> command and even changed the source of the ps2fax program, but Hylafax
> sends allways 98 dpi? Is Hylafax not able to send with a higher
> resolution?
> 
man sendfax:

commandline:
-m          Transmit  the  facsimile  at a vertical resolution of 196 
lines/inch; otherwise known as medium resolution or fine mode.

/usr/lib/fax/hylarc:
VRes             float      98.          vertical resolution


You can also define the default resolution at compile time (don't know exactly 
if this will be hardcoded or just put into a config-file).

Greetings, Sascha



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services