Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

modem problem?



I am using  HylaFAX v4.0pl1 for SVR4.2 (Unixware 2.1) and US robotics sportster 28.8 modem with V.34. Whenever I send page, the server drops the connection after successfully sending the page. The send command does not get any status back on the client side. On the server side log, I find this....

Jul 22 22:10:48.32: [  408]: SEND PAGE: FROM mailm@mailsrv4 TO 918009464644 (sent in 0:22)
Jul 22 22:10:48.32: [  408]: <-- [5:ATH0\r]
Jul 22 22:10:49.90: [  408]: --> [30:t[4f^B.Bb^K7j#YUUUUUUUUUUUUUUUUU]
Jul 22 22:10:49.90: [  408]: --> [10:NO CARRIER]
Jul 22 22:10:49.90: [  408]: MODEM No carrier
Jul 22 22:10:49.90: [  408]: STATE CHANGE: SENDING -> MODEMWAIT
Jul 22 22:10:49.90: [  408]: MODEM input buffering enabled
Jul 22 22:10:49.90: [  408]: MODEM set DTR OFF
Jul 22 22:10:49.92: [  408]: SESSION END


The ATH0 is dropping the line(on hook).It is normally followed by some garbage. Another sample.....

Jul 22 22:10:17.16: [  402]: SEND PAGE: FROM mailm@mailsrv4 TO 918009464644 (sen
t in 0:22)
Jul 22 22:10:17.16: [  402]: <-- [5:ATH0\r]
Jul 22 22:10:18.30: [  402]: --> [41:FJ_o;&D^A6[yHUUUUUUUUUUUUUUUUUUUUUUUUUUUUU]
Jul 22 22:10:18.30: [  402]: --> [10:NO CARRIER]
Jul 22 22:10:18.30: [  402]: MODEM No carrier
Jul 22 22:10:18.30: [  402]: STATE CHANGE: SENDING -> MODEMWAIT
Jul 22 22:10:18.30: [  402]: MODEM input buffering enabled
Jul 22 22:10:18.30: [  402]: MODEM set DTR OFF
Jul 22 22:10:18.30: [  402]: SESSION END

Can anyone point out the problem?

thanks,

nagu
~


-----== Sent via Deja News, The Discussion Network ==-----
http://www.dejanews.com/  Easy access to 50,000+ discussion forums



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services