|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Netcom 144 & timing problem ?
>
> > Apr 19 16:02:26.91: [11891]: <-- [13:ATDT94304494\r]
> > Apr 19 16:02:39.26: [11891]: --> [12:ATDT94304494]
> > Apr 19 16:02:39.26: [11891]: SEND FAILED: Unknown problem (check modem power)
12 seconds isn't really very long to, detect dial tone, dial the number,
wait for a few rings, recognize fax calling tone, generate answer tone,
detect calling carrier, and generate answering carrier, even if it is
a dedicated fax line.
If you don't have a timeout like this, you may have some sort of modem
control problem.
> add "9,", not just "9", to make sure that it dials 9 and waits for
> a dial tone.
It will have a rather long wait on any PABX manufactured in the last
decade or so, as nearly all of them do not generate a secondary dial
tone, and do not require a delay.
