flexfax: facsimile not received (fwd)

["Stan Brown" <stanb@awod.com>]

	Anyone got any clues as to whats going on here? It seems to be repatable from a
	certain originating fax.

>An attempt to receive facsimile on cul00 failed because:
>
>    Missing EOL after 5 seconds (section 3.2/T.4)
>
>    ---- Transcript of session follows ----
>
>Apr 06 10:10:48.62: [  241]: SESSION BEGIN 00000898 18438864919
>Apr 06 10:10:48.62: [  241]: <-- [19:AT+FCLASS=2;S7=20A\r]
>Apr 06 10:10:56.71: [  241]: --> [5:+FCON]
>Apr 06 10:10:56.71: [  241]: ANSWER: FAX CONNECTION
>Apr 06 10:10:56.72: [  241]: RECV FAX: begin
>Apr 06 10:10:58.73: [  241]: --> [28:+FTSI:"  HP Response Center"]
>Apr 06 10:10:58.73: [  241]: REMOTE TSI "HP Response Center"
>Apr 06 10:10:58.74: [  241]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
>Apr 06 10:10:58.74: [  241]: REMOTE wants 9600 bit/s
>Apr 06 10:10:58.74: [  241]: REMOTE wants page width 1728 pixels in 215 mm
>Apr 06 10:10:58.74: [  241]: REMOTE wants unlimited page length 
>Apr 06 10:10:58.74: [  241]: REMOTE wants 7.7 line/mm
>Apr 06 10:10:58.74: [  241]: REMOTE wants 1-D MR
>Apr 06 10:10:59.31: [  241]: --> [2:OK]
>Apr 06 10:10:59.32: [  241]: <-- [7:AT+FDR\r]
>Apr 06 10:11:03.72: [  241]: --> [5:+FCFR]
>Apr 06 10:11:03.72: [  241]: --> [21:+FDCS:1,3,0,2,0,0,0,0]
>Apr 06 10:11:03.72: [  241]: REMOTE wants 9600 bit/s
>Apr 06 10:11:03.72: [  241]: REMOTE wants page width 1728 pixels in 215 mm
>Apr 06 10:11:03.72: [  241]: REMOTE wants unlimited page length 
>Apr 06 10:11:03.72: [  241]: REMOTE wants 7.7 line/mm
>Apr 06 10:11:03.73: [  241]: REMOTE wants 1-D MR
>Apr 06 10:11:03.73: [  241]: --> [7:CONNECT]
>Apr 06 10:11:03.73: [  241]: RECV: begin page
>Apr 06 10:11:03.73: [  241]: RECV: send trigger 021
>Apr 06 10:13:06.03: [  241]: RECV: Missing EOL after 5 seconds
>Apr 06 10:13:06.04: [  241]: REMOTE HANGUP: Missing EOL after 5 seconds (section 3.2/T.4) (code 91)
>Apr 06 10:13:06.05: [  241]: RECV FAX (00000898): recvq/fax00007.tif from HP Response Center, route to <unspecified>, 0 pages in 2:10
>Apr 06 10:13:06.06: [  241]: RECV FAX: Missing EOL after 5 seconds (section 3.2/T.4)
>Apr 06 10:13:06.06: [  241]: <-- [6:AT+FK\r]
>Apr 06 10:13:06.17: [  241]: --> [5:ERROR]
>Apr 06 10:13:06.17: [  241]: MODEM Command error
>Apr 06 10:13:06.19: [  241]: RECV FAX (00000898): session with HP Response Center terminated abnormally: Missing EOL after 5 seconds (section 3.2/T.4)
>Apr 06 10:13:06.19: [  241]: RECV FAX: bin/faxrcvd "recvq/fax00007.tif" "cul00" "00000898" "Missing EOL after 5 seconds (section 3.2/T.4)"
>


-- 
Stan Brown     stanb@netcom.com                                    770-996-6955
Factory Automation Systems
Atlanta Ga.
-- 
Look, look, see Windows 95.  Buy, lemmings, buy!   
Pay no attention to that cliff ahead...            Henry Spencer
(c) 1998 Stan Brown.  Redistribution via the Microsoft Network is prohibited.