flexfax: Problems with haylafax and creatix modem

[Martin Klingler <mkli@netway.at>]

Hi to the mailing list,

I am using Hylafax V4.Opl1 on the S.u.S.E. Distribution 5.0 with Creatix LC 144VF.

I get the following error during sending and receiving of faxes. I have checked it with different remote partners, its always the same.

Mar 04 21:39:01.18: [  331]: DIAL 04242232241
Mar 04 21:39:01.19: [  331]: <-- [16:ATDT04242232241\r]
Mar 04 21:39:18.98: [  331]: --> [5:+FCON]
Mar 04 21:39:21.20: [  331]: --> [29:+FCSI: "         04242 23224"]
Mar 04 21:39:21.20: [  331]: REMOTE CSI "04242 23224"
Mar 04 21:39:21.46: [  331]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
Mar 04 21:39:21.57: [  331]: --> [2:OK]
Mar 04 21:39:21.57: [  331]: REMOTE best rate 9600 bit/s
Mar 04 21:39:21.57: [  331]: REMOTE max page width 1728 pixels in 215 mm
Mar 04 21:39:21.57: [  331]: REMOTE max unlimited page length 
Mar 04 21:39:21.57: [  331]: REMOTE best vres 7.7 line/mm
Mar 04 21:39:21.57: [  331]: REMOTE best format 2-D MR
Mar 04 21:39:21.58: [  331]: REMOTE best 20 ms, 10 ms/scanline
Mar 04 21:39:21.58: [  331]: USE 9600 bit/s
Mar 04 21:39:21.58: [  331]: USE 20 ms, 10 ms/scanline
Mar 04 21:39:21.58: [  331]: <-- [5:ATH0\r]
Mar 04 21:39:21.83: [  331]: --> [9:+FHNG: 20]
Mar 04 21:39:21.83: [  331]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Mar 04 21:39:22.82: [  331]: --> [2:OK]
Mar 04 21:39:22.82: [  331]: SESSION END

Has anybody an idea what the reason could be for this result.

Thank You very much and best regards

Martin