Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Timeout using UCP



Holger Pfaff wrote:
    
    Hi!
    
    I have problems sending SMS messages to the german D2
    Network. I always get timeouts.
    
    hylafax-v4.0pl2 (+ pageSendApp.c++ Patch recently mailed)
    Solaris 2.5
    Modem Creatix 144VF
    
    Mar 03 16:08:32.37: [ 9240]: DIAL 001722278030
    Mar 03 16:08:32.37: [ 9240]: <-- [19:ATX3DT001722278030\r]
    Mar 03 16:08:51.98: [ 9240]: --> [17:CONNECT 38400/REL]

I'm using the SMSC dial-in number 01722278020; don't know what
kind of protocol is used behind 01722278030; I don't have the
manual of my Creatix 144VF handy, but the answer "CONNECT 38400/REL"
looks like "reliable mode", e.g. with error correction, and is
fine; try the other dial-in number;

    Mar 03 16:08:51.98: [ 9240]: SEND message block:
    [01/00048/O/30/491728213029/////////7465737434/23]

your message doesn't contain the mobil number of the originator;
you have to set it in the info(4F) file (yes, I know it's not the
right place, should be fixed soon); both numbers (originator and
destination) must be in the syntax

   0172xxxxxxx  or
0049172xxxxxxx

this should also be controled in the driver because the UCP seems
to require it (at least for EMI command and address syntax);

	matthias

    Mar 03 16:09:11.67: [ 9240]: MODEM TIMEOUT: reading line from modem
    Mar 03 16:09:11.67: [ 9240]: SEND PAGE: FROM root@s1aa56a TO
    001722278030 (sent in 0:39)
    Mar 03 16:09:11.67: [ 9240]: <-- [5:ATH0\r]
    Mar 03 16:09:12.20: [ 9240]: --> [4:ATH0]
    Mar 03 16:09:17.21: [ 9240]: MODEM TIMEOUT: reading line from modem
    Mar 03 16:09:17.21: [ 9240]: MODEM <Timeout>
    
    
    Any Ideas?
    
    
    -- Holger



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services